gustyScanner

2 in a row is unlucky. I wish there was actual supply to buy. I had to buy through a 3rd party Amazon seller and it was pretty much the only option. Thanks yall

I was finally able to source a USB keyboard and was able to boot into the bios with the new harddrive plugged directly into the motherboard. The HDD does not appear in the bios when connected directly to the motherboard. I do see the drives provided by my HBA card as well, but not the new Seagate hard drive. I can use this same cable and power cord and it works on all my existing drives, including the drive I was trying to replace with the SMART errors. The motherboard is on the older side (I believe at least 8 years old), could it be due to an incompatibility? I do not think it could be related to the size of the hard drive because I have other drives the same size which work great.

Thank you both, I am going to need to get a USB keyboard to try booting my server into the BIOS. Weirdly if I plug in the HDMI to the PC right now I do not see anything on the monitor, but the server is working as it appears on my local network.

Hello, I have a brand new Seagate IronWolf Pro, 20 TB hard drive which is failing to appear in Unraid. I am using this drive to replace one which was throwing many SMART errors. I have never had an issue with a drive being detected before. I have this HBA controller: OEM LSI 9201-16i https://www.ebay.com/itm/394355635243 Motherboard: Gigabyte Z270P-D3-CF (Intel Z270, LGA1151) I have also attached my diagnostics. I think this may be an issue on my end. I had gotten one of these drives in a week ago but it made odd noises and did not appear so I thought it was faulty. This 2nd drive is also not appearing in Unraid. Thank you! tower-diagnostics-20260413-1057.zip

Hello! I have been using wireguard successfully for a long time with this container, today though when the container restarted I got the following error: 2025-06-27 10:35:26,490 DEBG 'start-script' stderr output: [#] ip link add dev wg0 type wireguard 2025-06-27 10:35:26,492 DEBG 'start-script' stderr output: [#] wg setconf wg0 /dev/fd/63 2025-06-27 10:35:26,493 DEBG 'start-script' stderr output: [#] ip -4 address add 10.2.0.2/32 dev wg0 2025-06-27 10:35:26,499 DEBG 'start-script' stderr output: [#] ip link set mtu 1420 up dev wg0 2025-06-27 10:35:26,501 DEBG 'start-script' stderr output: [#] resolvconf -a wg0 -m 0 -x 2025-06-27 10:35:26,508 DEBG 'start-script' stderr output: could not detect a useable init system 2025-06-27 10:35:26,521 DEBG 'start-script' stderr output: resolvconf: signature mismatch: /etc/resolv.conf 2025-06-27 10:35:26,522 DEBG 'start-script' stderr output: resolvconf: run resolvconf -u to update 2025-06-27 10:35:26,529 DEBG 'start-script' stderr output: [#] ip link delete dev wg0 2025-06-27 10:35:26,623 DEBG 'start-script' stdout output: [warn] Failed to bring 'up' WireGuard kernel implementation I am unsure what I should do to fix this, I see issues with resolvconf but since this is on startup am unsure what I should do. For now I switched to OpenVPN which is working successfully. EDIT: If I open the console of the container and do cat /etc/resolv.conf I see several different IP addresses listed. I recognize some like 1.1.1.1 as GOogle's DNS nameserver 84.200.69.80 nameserver 37.235.1.174 nameserver 1.1.1.1 nameserver 37.235.1.177 nameserver 84.200.70.40 nameserver 1.0.0.1 EDIT 2: I was able to resolve this by removing the DNS portion of my wg0.conf file

Hello, An issue has started for me where if I enable Docker in the Unraid GUI my CPU usage spikes to 100%, even without a container running. I have attached logs as well. Has anyone seen this before? Thank you! tower-diagnostics-20240722-2156.zip

Did you figure out your issue? I have been having the same thing, even with all containers stopped.

I wish I'd gathered that. For now, I have created a brand new VM of HomeAssistant and used it's backup/restore functionality to see if that solved the issue. So far, so good with the new image. If I see this with the new image I will definitely follow-up.

I have been having issues where my HomeAssistant VM will run well for several days. At some point the Zigbee USB stick will no longer be detected (or it has an error accessing it, HomeAssistant states "Could not open port ... no such file or directory" I've attached a screenshot). I recently moved the pools on my cache drives, which my VM was on, from btrfs to zfs by moving all data to the array, reformatting, and moving the data back. This error has been happening since then, but everything else on the drive (docker) is working as expected. During my zfs move, I did have issues moving the "/user/system/libvirt/libvirt.img" file, and found a post saying that it would likely be safe to remove as it would be recreated. Which it was, but I'm not sure if that is the reason these errors started. I see these in my USB Manager logs, which makes me think it is connecting and then becoming disconnected repeatedly until it stops. May 2 09:12:54 Tower kernel: usb 1-4.2: new full-speed USB device number 32 using xhci_hcd May 2 09:12:54 Tower kernel: cdc_acm 1-4.2:1.0: ttyACM0: USB ACM device May 2 09:12:58 Tower kernel: usb 1-4.2: USB disconnect, device number 32 May 2 09:12:58 Tower kernel: usb 1-4.2: new full-speed USB device number 33 using xhci_hcd May 2 09:12:58 Tower kernel: cdc_acm 1-4.2:1.0: ttyACM0: USB ACM device

I have been having issues where my HomeAssistant VM will run well for several days. At some point the Zigbee USB stick will no longer be detected (or it has an error accessing it, HomeAssistant states "Could not open port ... no such file or directory" I've attached a screenshot). I recently moved the pools on my cache drives, which my VM was on, from btrfs to zfs by moving all data to the array, reformatting, and moving the data back. This error has been happening since then, but everything else on the drive (docker) is working as expected. I also see these logs in USB Serial Manager plugin since for this device I need to set it to "Connect as serial only" May 2 09:12:54 Tower kernel: usb 1-4.2: new full-speed USB device number 32 using xhci_hcd May 2 09:12:54 Tower kernel: cdc_acm 1-4.2:1.0: ttyACM0: USB ACM device May 2 09:12:58 Tower kernel: usb 1-4.2: USB disconnect, device number 32 May 2 09:12:58 Tower kernel: usb 1-4.2: new full-speed USB device number 33 using xhci_hcd May 2 09:12:58 Tower kernel: cdc_acm 1-4.2:1.0: ttyACM0: USB ACM device During my zfs move, I did have issues moving the "/user/system/libvirt/libvirt.img" file, and found a post saying that it would likely be safe to remove as it would be recreated. Which it was, but I'm not sure if that is the reason these errors started.

Hello, this has begun happening over the past few days. There have not been any significant changes to my setup but my VM has begun to "stop" and when viewing the logs I can see it is due to a crash. From the logs I am unsure if the crash is on Unraid's side or on Home Assistant Operating System, https://github.com/home-assistant/operating-system, which is what the VM is running. Here are the logs: -rtc base=utc,driftfix=slew \ -global kvm-pit.lost_tick_policy=delay \ -no-hpet \ -no-shutdown \ -boot strict=on \ -device '{"driver":"pcie-root-port","port":16,"chassis":1,"id":"pci.1","bus":"pcie.0","multifunction":true,"addr":"0x2"}' \ -device '{"driver":"pcie-root-port","port":17,"chassis":2,"id":"pci.2","bus":"pcie.0","addr":"0x2.0x1"}' \ -device '{"driver":"pcie-root-port","port":18,"chassis":3,"id":"pci.3","bus":"pcie.0","addr":"0x2.0x2"}' \ -device '{"driver":"pcie-root-port","port":19,"chassis":4,"id":"pci.4","bus":"pcie.0","addr":"0x2.0x3"}' \ -device '{"driver":"pcie-root-port","port":20,"chassis":5,"id":"pci.5","bus":"pcie.0","addr":"0x2.0x4"}' \ -device '{"driver":"ich9-usb-ehci1","id":"usb","bus":"pcie.0","addr":"0x7.0x7"}' \ -device '{"driver":"ich9-usb-uhci1","masterbus":"usb.0","firstport":0,"bus":"pcie.0","multifunction":true,"addr":"0x7"}' \ -device '{"driver":"ich9-usb-uhci2","masterbus":"usb.0","firstport":2,"bus":"pcie.0","addr":"0x7.0x1"}' \ -device '{"driver":"ich9-usb-uhci3","masterbus":"usb.0","firstport":4,"bus":"pcie.0","addr":"0x7.0x2"}' \ -device '{"driver":"virtio-serial-pci","id":"virtio-serial0","bus":"pci.2","addr":"0x0"}' \ -blockdev '{"driver":"file","filename":"/mnt/user/domains/HomeAssistant/haos_ova-9.5.vmdk","node-name":"libvirt-1-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"vmdk","file":"libvirt-1-storage","backing":null}' \ -device '{"driver":"virtio-blk-pci","bus":"pci.3","addr":"0x0","drive":"libvirt-1-format","id":"virtio-disk2","bootindex":1,"write-cache":"on"}' \ -netdev tap,fd=35,id=hostnet0 \ -device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"52:54:00:ad:6a:98","bus":"pci.1","addr":"0x0"}' \ -chardev pty,id=charserial0 \ -device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \ -chardev socket,id=charchannel0,fd=33,server=on,wait=off \ -device '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}' \ -device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \ -audiodev '{"id":"audio1","driver":"none"}' \ -vnc 0.0.0.0:0,websocket=5700,audiodev=audio1 \ -k en-us \ -device '{"driver":"qxl-vga","id":"video0","max_outputs":1,"ram_size":67108864,"vram_size":67108864,"vram64_size_mb":0,"vgamem_mb":16,"bus":"pcie.0","addr":"0x1"}' \ -device '{"driver":"usb-host","hostdevice":"/dev/bus/usb/001/005","id":"hostdev0","bus":"usb.0","port":"2"}' \ -device '{"driver":"virtio-balloon-pci","id":"balloon0","bus":"pci.4","addr":"0x0"}' \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on char device redirected to /dev/pts/0 (label charserial0) qxl_send_events: spice-server bug: guest stopped, ignoring qemu: qemu_thread_create: Resource temporarily unavailable 2024-01-09 18:30:52.940+0000: shutting down, reason=crashed tower-diagnostics-20240109-1810.zip

I ran it over all disks, and also then the relevant shares but SMB still does not seem to show all the files. I am familiar with the command line if there is anything in particular I could provide that would be useful.

Thank you! I have attached my diagnostics file. The share I am having issues with is called `data`. I have Fix Common Problems and a fresh scan does not show any errors/warnings. tower-diagnostics-20230730-1642.zip

Hello, I am seeing an issue where if I browse a share in the WebUI, some folders show many more files and folders than I am able to see in the SMB share. I am not really at liberty to share these filenames as they contain PII. What do I need to do to resolve this issue? I'm not sure if its filesystem corruption, as they do appear in the WebUI, or if it is a bug with SMB itself. Thank you

Fantastic plugin, thank you for working on it! Exit node as a setting to persist across reboots would be fantastic.

Has anyone had an issue with the qBittorrent webui not loading when using Wireguard? I can use OpenVPN and the webui then loads fine. If I read the logs on both Wireguard and OpenVPN I can see it made connections to the proper VPN (and if I use a command within the container, they do have network connection curl icanhazip.com) I wonder what it is about using Wireguard that breaks the qBittorrent UI for me.

Invalid file (or folder) contained within /mnt Hello, I am getting this warning from Fix Common problems. I think initially this came about because I was using /mnt/disks/Dropbox for Rclone, but switched to /mnt/addons/Dropbox based on the recommendation. What I cannot understand is that after moving this mount point, I still get this error. The /mnt/disks directory is also now empty. I have attached diagnostics. Thank you for this and the other great tools. tower-diagnostics-20230309-1458.zip

I'm sorry I must be blind. I do not see "Hardware" under settings on my Unraid server. In your screenshot is I see Hardware in my HomeAssistant VM but it looks different from the screenshot. I've attached screenshots of what I think are the relevant pages. I currently have a Z Wave stick passed through (working on the Wave integration), and the Conbee II for Zigbee

Thank you for the help. I do see connect(serial) now. I wonder if I need to change a setting in HomeAssistant. I now see this error when the HomeAssistant Zigbee add-on starts. Note, I have removed the serial number from these logs: Error setting up entry ConBee II, s/n: XXXX8982 - dresden elektronik ingenieurtechnik GmbH for zha Traceback (most recent call last): File "/usr/local/lib/python3.10/site-packages/serial/serialposix.py", line 322, in open self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK) FileNotFoundError: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_XXXX58982-if00' During handling of the above exception, another exception occurred: File "/usr/local/lib/python3.10/site-packages/serial/serialposix.py", line 325, in open raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 2] could not open port /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_XXXX58982-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_XXXX58982-if00' Seems closer, also seems like possibly the mount for serial/by-id is wrong? Here is what I see on my Unraid in CLI: root@Tower:~# cd /dev/serial/by-id/ root@Tower:/dev/serial/by-id# ls usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_XXXX58982-if00@ Its very odd because the serial ID is the same, the paths I see in the error and in the above ls command are the same. Hopefully this info is helpful, thank you again.

Hello, I am having this issue. I am having some trouble following the instructions. Right now in the "USB" tab via USB Manager I have this setup. When going into the USB Settings there is both "Device" and "Port" settings. I do not think my Conbee is attached in "serial" mode. Where are the "hardware" screenshots coming from? I am having trouble finding that.

Is it possible to remove a stack via the UI? I can delete the config files, but then are the orphaned containers cleaned up? Thank you for the plugin!

Hmm, I had tried that but my configs were gone in the download as well. I solved this by manually going through and recreating. A bit of a pain but now I know and backup this directory. For now I have CA Appbackup taking a backup of my flash drive so I can have historical backups incase I see this again.

Sorry last thing. I do have my AppData backed up via the CA Appdata Backup/Restore. It seems like backing up these dockerMan configs would be important for me to do as well? It looks like CA Backup used to backup the flash drive, but they mention to use the Unraid.net Plugin now to do so. I do have this Unraid.net plugin setup and it says Flash backup is "activated" but is it possible to download prior backups?

Hello, I have a new Unraid server setup. I spent a lot of time setting up my docker applications. I went to update one of the dockers I setup but it fails due to "Configuration not found. Was this container created using this plugin?" I found out this is due to my config files missing from my flash drive. I do not know how they could be missing from my flash drive as this was working this morning, and is no longer working now. I do not see my configs (except for a single, most recently created one). What can I do about this? Am I screwed and do I need to restart my docker setup so these config files exist again? Why were they removed in the first place (so this doesn't happen again). tower-diagnostics-20230227-1741.zip