Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,871

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Create a new pool and add it there.
  2. JorgeB
    The result will be in the SMART report.
  3. JorgeB
    BIOS is separate form IT/IR mode, both can have it or not: https://forums.unraid.net/topic/12114-lsi-controller-fw-updates-irit-modes/?do=findComment&comment=632252
  4. JorgeB
    Use Midnight Commander (mc on the console), you can select all files/folders to copy/move, use the Insert key IIRC.
  5. JorgeB
    Looks more like a board compatibility issue, if installed delete the BIOS from the HBA, it's not needed for Unraid and it can cause boot issues with some hardware.
  6. JorgeB
    Does it completly freeze and you need to reset or does it stop responding temporarily during high i/o?
  7. JorgeB
    Only issue I'm seeing for now is the cache device dropping offline and reconnecting again, reboot and post new diags after array start.
  8. JorgeB
    Strange, cannot see a reason for the dock not working, especially if it worked before, though would never recommend adding an array device using USB.
  9. JorgeB
    There's considerable log spam but not seeing any extra disk being detected, only a USB device, but that could be the USB bridge, try using a different disk to see if there's any difference.
  10. JorgeB
    If you currently have a VM working reboot and post new diags after array start.
  11. JorgeB
    Driver is working, problem is that it's identifying the disks as: HPT VD1-0 HPT VD1-1 HPT VD1-2 etc, There's no serial number, though they are not all identical Unraid is not accepting that as valid identifiers, it considers all the same device, hence the problem.
  12. JorgeB
    First check that you don't have multiple libvirt images, post the output of: find /mnt -name libvirt.img
  13. JorgeB
    Cache device dropped offline: Oct 23 06:21:46 Tower kernel: ata7: reset failed, giving up Oct 23 06:21:46 Tower kernel: ata7.00: disabled Oct 23 06:21:46 Tower kernel: ata7: EH complete Check/replace cables.
  14. JorgeB
    Run it again with -L
  15. JorgeB
    Then it suggests a bad disk.
  16. JorgeB
    How are you planing on assigning the disks? Currently the array only supports up to 30 disks, remaining ones would need to be assigned to pools.
  17. JorgeB
    Log is spammed with unrelated issues, make sure you close any browser windows opened to the GUI on an Android device, add 'logging = 0' to SMB extra settings, then reboot and try again, if the same happens post new diags, also note that RAID controllers are not recommend with Unraid, though it should not be the reason for this issue.
  18. JorgeB
    Did you try using the server IP address?
  19. JorgeB
    Type 'top' in the console, top right corner you'll see the server load, monitor to see if you can find what's making this climb, ideally it should be in the single digits for most of the time.
  20. JorgeB
    Nothing obvious logged, it only crashes when using Duplicati?
  21. JorgeB
    One thing you can try is to boot the server in safe mode with all docker/VMs disable, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one.
  22. JorgeB
    Strange, I don't have experience with those enclosures but don't remember anyone posting about a similar issue, hopefully the LSI helps.
  23. JorgeB
    Enable the syslog server and post that after a crash.
  24. JorgeB
    Power down the server, swap cables with a different disk a power back up.
  25. JorgeB
    Disk dropped offline again, did you also use a different power cable?
×
×
  • Create New...