JorgeB

Try rebuilding disk22 again, server load will be the same as just resyncing parity, though if you no longer want that disk (and its data) in the array then might as well rebuild parity without it.

You can try, but first

Please post the diagnostics.

Disk is mounting.

If you mean the docker image you can re-create it.

Some good info about that below: https://forums.unraid.net/topic/123901-plex-issues-upon-upgrade-to-6101/?do=findComment&comment=1138715 https://forums.unraid.net/topic/75436-guide-how-to-use-rclone-to-mount-cloud-drives-and-play-files/page/115/#comment-1140504

Very strange, it's not device related since in one of the diags it was writing at 1.8GB/s, also doesn't look like it's LAN related due to iperf results and initial higher speed while it's caching to RAM, I'm stumped...

Post new diags after array start.

It should say read errors.

It will start writing to other device when one of the floors is hit, it doens't matter which one, it has always been like this.

It's not writing to any device, maybe you grabbed the diags too soon, it can take a few seconds for writes to start while it's being cached to RAM.

Use -L. Disk3 will need to be rebuilt since the array was started without it.

Reboot and post new diags after array start.

All 4 disks connected with USB dropped offline: Aug 18 02:05:48 OohWee kernel: usb 2-2.1.1: reset SuperSpeed USB device number 6 using xhci_hcd Aug 18 02:05:54 OohWee kernel: usb 2-2.1.2: reset SuperSpeed USB device number 7 using xhci_hcd Aug 18 02:09:25 OohWee kernel: usb 2-2.1.1: reset SuperSpeed USB device number 6 using xhci_hcd Aug 18 02:09:52 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:52 OohWee kernel: usb 2-1: device descriptor read/8, error -71 Aug 18 02:09:52 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:52 OohWee kernel: usb 2-1: device descriptor read/8, error -71 Aug 18 02:09:52 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:52 OohWee kernel: usb 2-1: device descriptor read/all, error -71 Aug 18 02:09:53 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:53 OohWee kernel: usb 2-1: device descriptor read/8, error -75 Aug 18 02:09:53 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:53 OohWee kernel: usb 2-1: device descriptor read/all, error -71 Aug 18 02:09:53 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:53 OohWee kernel: usb 2-1: device descriptor read/8, error -75 Aug 18 02:09:53 OohWee kernel: usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd Aug 18 02:09:53 OohWee kernel: usb 2-1: device descriptor read/all, error -71 Aug 18 02:09:53 OohWee kernel: hub 2-2.1:1.0: hub_ext_port_status failed (err = -71) Aug 18 02:09:53 OohWee kernel: usb 2-1: USB disconnect, device number 2 We don't recommend USB for array or pool devices, same for SATA port multiplier which you are also using and also showing issues: Aug 17 23:19:50 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:19:50 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:19:50 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:19:50 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:19:50 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:19:50 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0x54812022 SErr 0x0 action 0x6 frozen Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/c8:08:d8:5e:50/02:00:0c:00:00/40 tag 1 ncq dma 364544 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/40:28:a0:4a:50/05:00:0c:00:00/40 tag 5 ncq dma 688128 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/b8:68:a0:52:50/01:00:0c:00:00/40 tag 13 ncq dma 225280 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/c0:80:e0:4f:50/02:00:0c:00:00/40 tag 16 ncq dma 360448 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/40:b8:58:54:50/05:00:0c:00:00/40 tag 23 ncq dma 688128 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/40:d0:a0:42:50/05:00:0c:00:00/40 tag 26 ncq dma 688128 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/40:e0:98:59:50/05:00:0c:00:00/40 tag 28 ncq dma 688128 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:19:50 OohWee kernel: ata4.01: cmd 60/c0:f0:e0:47:50/02:00:0c:00:00/40 tag 30 ncq dma 360448 in Aug 17 23:19:50 OohWee kernel: res 40/00:b8:58:54:50/00:00:0c:00:00/40 Emask 0x4 (timeout) Aug 17 23:19:50 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:19:50 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:19:51 OohWee kernel: ahci 0000:07:00.0: FBS is disabled Aug 17 23:19:51 OohWee kernel: ahci 0000:07:00.0: FBS is enabled Aug 17 23:19:51 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:19:51 OohWee kernel: ata4.01: hard resetting link Aug 17 23:19:51 OohWee kernel: ahci 0000:07:00.0: FBS is disabled Aug 17 23:19:56 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:20:01 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:20:04 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:20:04 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:20:04 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:20:04 OohWee kernel: ata4.15: hard resetting link Aug 17 23:20:04 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:20:05 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:20:05 OohWee kernel: ata4.01: hard resetting link Aug 17 23:20:10 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:20:15 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:20:18 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:20:18 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:20:18 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:20:18 OohWee kernel: ata4.15: hard resetting link Aug 17 23:20:18 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:20:19 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:20:19 OohWee kernel: ata4.01: hard resetting link Aug 17 23:20:19 OohWee kernel: ata4.01: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:20:20 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 330) Aug 17 23:20:20 OohWee kernel: ata4.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:20:21 OohWee kernel: ata4.04: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:20:21 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:20:21 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:20:21 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:20:21 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:20:21 OohWee kernel: ata4.04: configured for UDMA/133 Aug 17 23:20:21 OohWee kernel: ata4: EH complete Aug 17 23:33:38 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:33:38 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:33:38 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:33:38 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:33:38 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:33:38 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0x300 SErr 0x0 action 0x6 frozen Aug 17 23:33:38 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:33:38 OohWee kernel: ata4.01: cmd 60/40:40:b8:4e:35/05:00:0e:00:00/40 tag 8 ncq dma 688128 in Aug 17 23:33:38 OohWee kernel: res 40/00:50:60:5d:69/00:00:ae:03:00/40 Emask 0x4 (timeout) Aug 17 23:33:38 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:33:38 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:33:38 OohWee kernel: ata4.01: cmd 60/a8:48:f8:53:35/04:00:0e:00:00/40 tag 9 ncq dma 610304 in Aug 17 23:33:38 OohWee kernel: res 40/00:50:60:5d:69/00:00:ae:03:00/40 Emask 0x4 (timeout) Aug 17 23:33:38 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:33:39 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:33:39 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:33:39 OohWee kernel: ata4.01: hard resetting link Aug 17 23:33:45 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:33:49 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:33:52 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:33:52 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:33:52 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:33:52 OohWee kernel: ata4.15: hard resetting link Aug 17 23:33:53 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:33:53 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:33:53 OohWee kernel: ata4.01: hard resetting link Aug 17 23:33:54 OohWee kernel: ata4.01: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:33:54 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 330) Aug 17 23:33:55 OohWee kernel: ata4.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:33:55 OohWee kernel: ata4.04: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:33:55 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:33:55 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:33:55 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:33:55 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:33:55 OohWee kernel: ata4.04: configured for UDMA/133 Aug 17 23:33:55 OohWee kernel: ata4: EH complete Aug 17 23:36:16 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:36:16 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:36:16 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:36:16 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:36:16 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:36:16 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0x8000003f SErr 0x0 action 0x6 frozen Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/40:00:10:9d:81/05:00:0e:00:00/40 tag 0 ncq dma 688128 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/40:08:50:a2:81/05:00:0e:00:00/40 tag 1 ncq dma 688128 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/40:10:90:a7:81/05:00:0e:00:00/40 tag 2 ncq dma 688128 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/40:18:d0:ac:81/05:00:0e:00:00/40 tag 3 ncq dma 688128 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/40:20:10:b2:81/05:00:0e:00:00/40 tag 4 ncq dma 688128 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/68:28:50:b7:81/02:00:0e:00:00/40 tag 5 ncq dma 315392 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:36:16 OohWee kernel: ata4.01: cmd 60/a8:f8:68:9c:81/00:00:0e:00:00/40 tag 31 ncq dma 86016 in Aug 17 23:36:16 OohWee kernel: res 40/00:60:f0:b6:81/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:36:16 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:36:16 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:36:17 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:36:17 OohWee kernel: ata4.01: hard resetting link Aug 17 23:36:22 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:36:27 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:36:30 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:36:30 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:36:30 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:36:30 OohWee kernel: ata4.15: hard resetting link Aug 17 23:36:30 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:36:31 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:36:31 OohWee kernel: ata4.01: hard resetting link Aug 17 23:36:31 OohWee kernel: ata4.01: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:36:32 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 330) Aug 17 23:36:32 OohWee kernel: ata4.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:36:33 OohWee kernel: ata4.04: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:36:33 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:36:33 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:36:33 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:36:33 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:36:33 OohWee kernel: ata4.04: configured for UDMA/133 Aug 17 23:36:33 OohWee kernel: ata4: EH complete Aug 17 23:39:13 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:39:13 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:39:13 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:39:13 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:39:13 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:39:13 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0x1c800000 SErr 0x0 action 0x6 frozen Aug 17 23:39:13 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:39:13 OohWee kernel: ata4.01: cmd 60/40:b8:e8:b7:cc/05:00:0e:00:00/40 tag 23 ncq dma 688128 in Aug 17 23:39:13 OohWee kernel: res 40/00:e0:10:17:31/00:00:f3:00:00/40 Emask 0x4 (timeout) Aug 17 23:39:13 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:39:13 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:39:13 OohWee kernel: ata4.01: cmd 60/b8:d0:28:bd:cc/04:00:0e:00:00/40 tag 26 ncq dma 618496 in Aug 17 23:39:13 OohWee kernel: res 40/00:e0:10:17:31/00:00:f3:00:00/40 Emask 0x4 (timeout) Aug 17 23:39:13 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:39:13 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:39:13 OohWee kernel: ata4.01: cmd 60/00:d8:68:25:6c/02:00:9b:00:00/40 tag 27 ncq dma 262144 in Aug 17 23:39:13 OohWee kernel: res 40/00:e0:10:17:31/00:00:f3:00:00/40 Emask 0x4 (timeout) Aug 17 23:39:13 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:39:13 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:39:13 OohWee kernel: ata4.01: cmd 60/40:e0:10:17:31/00:00:f3:00:00/40 tag 28 ncq dma 32768 in Aug 17 23:39:13 OohWee kernel: res 40/00:e0:10:17:31/00:00:f3:00:00/40 Emask 0x4 (timeout) Aug 17 23:39:13 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:39:13 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:39:13 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:39:13 OohWee kernel: ata4.01: hard resetting link Aug 17 23:39:19 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:39:23 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:39:27 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:39:27 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:39:27 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:39:27 OohWee kernel: ata4.15: hard resetting link Aug 17 23:39:27 OohWee kernel: ata4.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 17 23:39:27 OohWee kernel: ata4.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:39:27 OohWee kernel: ata4.01: hard resetting link Aug 17 23:39:28 OohWee kernel: ata4.01: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:39:28 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 330) Aug 17 23:39:29 OohWee kernel: ata4.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:39:29 OohWee kernel: ata4.04: SATA link up 6.0 Gbps (SStatus 133 SControl 330) Aug 17 23:39:29 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:39:29 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:39:29 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:39:29 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:39:29 OohWee kernel: ata4.04: configured for UDMA/133 Aug 17 23:39:29 OohWee kernel: ata4: EH complete Aug 17 23:40:22 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:40:22 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:40:22 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:40:22 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:40:22 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:40:22 OohWee kernel: ata4.15: limiting SATA link speed to 3.0 Gbps Aug 17 23:40:22 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0xe0000 SErr 0x0 action 0x6 frozen Aug 17 23:40:22 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:40:22 OohWee kernel: ata4.01: cmd 60/a8:88:90:44:eb/00:00:0e:00:00/40 tag 17 ncq dma 86016 in Aug 17 23:40:22 OohWee kernel: res 40/00:50:90:44:eb/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:40:22 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:40:22 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:40:22 OohWee kernel: ata4.01: cmd 60/40:90:38:45:eb/05:00:0e:00:00/40 tag 18 ncq dma 688128 in Aug 17 23:40:22 OohWee kernel: res 40/00:50:90:44:eb/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:40:22 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:40:22 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:40:22 OohWee kernel: ata4.01: cmd 60/40:98:78:4a:eb/05:00:0e:00:00/40 tag 19 ncq dma 688128 in Aug 17 23:40:22 OohWee kernel: res 40/00:50:90:44:eb/00:00:0e:00:00/40 Emask 0x100 (unknown error) Aug 17 23:40:22 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:40:23 OohWee kernel: ata4.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:23 OohWee kernel: ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:23 OohWee kernel: ata4.01: hard resetting link Aug 17 23:40:29 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:40:33 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:40:36 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:40:36 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:40:36 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:40:36 OohWee kernel: ata4.15: hard resetting link Aug 17 23:40:37 OohWee kernel: ata4.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:37 OohWee kernel: ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:37 OohWee kernel: ata4.01: hard resetting link Aug 17 23:40:38 OohWee kernel: ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:38 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 320) Aug 17 23:40:39 OohWee kernel: ata4.03: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:39 OohWee kernel: ata4.04: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:40:39 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:40:39 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:40:39 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:40:39 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:40:39 OohWee kernel: ata4.04: configured for UDMA/133 Aug 17 23:40:39 OohWee kernel: ata4: EH complete Aug 17 23:44:11 OohWee kernel: ata4.00: failed to read SCR 1 (Emask=0x40) Aug 17 23:44:11 OohWee kernel: ata4.01: failed to read SCR 1 (Emask=0x40) Aug 17 23:44:11 OohWee kernel: ata4.02: failed to read SCR 1 (Emask=0x40) Aug 17 23:44:11 OohWee kernel: ata4.03: failed to read SCR 1 (Emask=0x40) Aug 17 23:44:11 OohWee kernel: ata4.04: failed to read SCR 1 (Emask=0x40) Aug 17 23:44:11 OohWee kernel: ata4.01: exception Emask 0x100 SAct 0x1000060 SErr 0x0 action 0x6 frozen Aug 17 23:44:11 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:44:11 OohWee kernel: ata4.01: cmd 60/08:28:50:e5:62/01:00:0f:00:00/40 tag 5 ncq dma 135168 in Aug 17 23:44:11 OohWee kernel: res 40/00:c0:80:e9:62/00:00:0f:00:00/40 Emask 0x4 (timeout) Aug 17 23:44:11 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:44:11 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:44:11 OohWee kernel: ata4.01: cmd 60/28:30:58:e6:62/03:00:0f:00:00/40 tag 6 ncq dma 413696 in Aug 17 23:44:11 OohWee kernel: res 40/00:c0:80:e9:62/00:00:0f:00:00/40 Emask 0x4 (timeout) Aug 17 23:44:11 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:44:11 OohWee kernel: ata4.01: failed command: READ FPDMA QUEUED Aug 17 23:44:11 OohWee kernel: ata4.01: cmd 60/c8:c0:80:e9:62/00:00:0f:00:00/40 tag 24 ncq dma 102400 in Aug 17 23:44:11 OohWee kernel: res 40/00:c0:80:e9:62/00:00:0f:00:00/40 Emask 0x4 (timeout) Aug 17 23:44:11 OohWee kernel: ata4.01: status: { DRDY } Aug 17 23:44:11 OohWee kernel: ata4.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:12 OohWee kernel: ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:12 OohWee kernel: ata4.01: hard resetting link Aug 17 23:44:17 OohWee kernel: ata4.01: link is slow to respond, please be patient (ready=0) Aug 17 23:44:22 OohWee kernel: ata4.01: softreset failed (device not ready) Aug 17 23:44:25 OohWee kernel: ata4.15: qc timeout (cmd 0xe4) Aug 17 23:44:25 OohWee kernel: ata4.01: failed to read SCR 0 (Emask=0x4) Aug 17 23:44:25 OohWee kernel: ata4.01: reset failed, giving up Aug 17 23:44:25 OohWee kernel: ata4.15: hard resetting link Aug 17 23:44:25 OohWee kernel: ata4.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:26 OohWee kernel: ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:26 OohWee kernel: ata4.01: hard resetting link Aug 17 23:44:26 OohWee kernel: ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:27 OohWee kernel: ata4.02: SATA link down (SStatus 0 SControl 320) Aug 17 23:44:27 OohWee kernel: ata4.03: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:28 OohWee kernel: ata4.04: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Aug 17 23:44:28 OohWee kernel: ata4.00: configured for UDMA/133 Aug 17 23:44:28 OohWee kernel: ata4.01: configured for UDMA/133 Aug 17 23:44:28 OohWee kernel: ata4.03: configured for UDMA/133 Aug 17 23:44:28 OohWee kernel: ata4.04: supports DRM functions and may not be fully accessible ### [PREVIOUS LINE REPEATED 1 TIMES] ### Aug 17 23:44:28 OohWee kernel: ata4.04: configured for UDMA/133

Grab diags during that copy and post here.

AFAIK it's always been like this.

[ST6000NM0095_ZAD3Q4NJ0000C829A6YY_35000c50095310bef] hotTemp="45" Current Drive Temperature: 48 C

Not really, always worked for me.

Then enable disk shares and copy directly to the NVMe disk share.

Change to

Try transferring to the pool with the NVMe device.

Cannot tell based on that, difficult to see where the problem could be if it's hardware related.

Is that copying to the array or a pool? If to a pool which one?

I would recommend setting the RAM do the max officially supported by that config.

Problem with cache2 device, check/replace cables.