Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,831

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Nothing obvious, try booting in safe mode.
  2. JorgeB
    Start here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173
  3. JorgeB
    Most boards have CPU slots (slots that are connected directly to the CPU) and PCH slots, slots are connected to the chipset, since that board has dual CPU it has enough lanes to use only CPU slots, the device *might* have worked better if there was a PCH slot.
  4. JorgeB
    No need to disable the pool, just change the use cache setting for that share to 'no', then change it back.
  5. JorgeB
    Yes, it used to default to export, but for security reasons it was changed some time ago.
  6. JorgeB
    Both are CPU slots, but looks like that board only has CPU slots.
  7. JorgeB
    Test failed, either replace the disk or try a full disk write to see it the sectors are remapped and don't come back again.
  8. JorgeB
    Are the shares being exported? Currently Unraid defaults to no (Share -> SMA Security Settings)
  9. JorgeB
    It's normal for VM virtual network performance to be slower than using a dedicated NIC, also make sure you are using virtio for the network model, it usually performs better than virtio-net.
  10. JorgeB
    Try a different PCI slot if available, if it's elated to the PCIe errors some slots might not show the issue, especially CPU vs PCH slots.
  11. JorgeB
    Make sure disk spin down is disabled before starting.
  12. JorgeB
    Forgot to specify, run the extended test, short one doesn't do a surface scan.
  13. JorgeB
    Enable the syslog server and post that after it happens again.
  14. JorgeB
    Aug 12 17:17:38 homeserver kernel: ixgbe 0000:05:00.1 eth1: NIC Link is Down Aug 12 17:17:38 homeserver kernel: bond0: (slave eth1): link status definitely down, disabling slave Aug 12 17:17:38 homeserver kernel: ixgbe 0000:05:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: None Aug 12 17:17:38 homeserver kernel: ixgbe 0000:05:00.1 eth1: NIC Link is Down This is filling up the log.
  15. JorgeB
    You can do it manually, download the v6.9.2 zip and unzip all bz* files to the flash drive.
  16. JorgeB
    Emulated disk4 didn't mount because disk3 dropped offline: Aug 25 01:41:22 ToscheStation kernel: ata10.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Aug 25 01:41:22 ToscheStation kernel: ata10.00: revalidation failed (errno=-5) Aug 25 01:41:22 ToscheStation kernel: ata10.00: disabled Check/replace cables, might also be a power related problem.
  17. JorgeB
    You can run a SMART test to confirm if they are a problem of not, if they are filling the drive with zeroes might remap them.
  18. JorgeB
    Start by running memtest to rule out obvious RAM issues.
  19. JorgeB
    Not seeing anything out of the ordinary in the first diags posted, or are they after rebooting?
  20. JorgeB
    Did you test with a non VM client like mentioned?
  21. JorgeB
    Reboot in safe mode and see if the GUI is any better, does the music share appear on Shares? If yes click on "compute" and post a screenshot.
  22. JorgeB
    Nothing relevant logged, PCIe errors were of course suppressed, but that might not be the problem, does the server crash without that device?
  23. JorgeB
    It is starting with v6.11.0-rc4
  24. JorgeB
    Swap cables between both SSDs, if the Crucial keeps dropping replace it.
  25. JorgeB
    This.
×
×
  • Create New...