anylettuce

Could someone post a proper how to video?

due to the fact my norco 4224 case is failing I purchased a netapp diskshelf. Moved all the drives over and now am at the stage of assigning things into the correct spot. the thing is I can get close to the correct S/N but not exactly. BTW I could have purchased 2 netapp shelves and corresponding HBA and cables for the price of a replacement 24 drive case. At the time of purchase example original S/N WDC_WD60EZRZ-00GZ5B1_WD-WX11D58HUHN4 new S/N WD60EZRZ-00GZ5B1_WD-WX11D58HUHN4 The only diffrence is the WDC_. If I clear the configuration and assign everything back in the same order will I be ok?

thought I had mine going but the same issue,

is the setup the same? have a test server running now with 8 drives to to see how things work.

picture of your docker setup?

I have the same card, you have the nvidia unraid build right? I have this on my 3600x machine. no workloads yet for some reason. CPU only. p2000 is in another machine will be setting up today as well

maybe it is something I did trying to move trancoding onto a p2000. latest 6.8.3 nvidia build. Gpu shows up. coppy gu id to the Nvidia Visible Devices: GPU-fcf6b195-48f5-e60d-f7cc-7fc3ce2b59c8 Nvidia Driver Version: 440.59 GPU 0 Model & Bus: Quadro P2000 26:00.0 GPU 0 UUID: GPU-fcf6b195-48f5-e60d-f7cc-7fc3ce2b59c8 IOMMU group 16: [10de:1c30] 26:00.0 VGA compatible controller: NVIDIA Corporation GP106GL [Quadro P2000] (rev a1) [10de:10f1] 26:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1) I select nvidia, get nothing but errors. remove the gpu from docker and regular cpu transcoding things work ok think I got it, add more variables to the docker

I just remembered why I didn't do this years ago and couldn't get anywhere. iommu is disabled on my test machine. agin cant remember if it was something I was going to look at and never did or the board can't do it. 10+ yo server hardware. I might build a low end ryzen 3 build and retire this one. I would like to have a unraid strictly for certain dockers and not to much on protection. Got to also figure out how space invador setup that 2nd pfsense to take over if unraid goes down

looking at something similar, multiple isp, multiple instances of the same docker on the same machine utilizing multiple isp connections. I did ask a while ago about having mutiple isp traffic down a single cat6 run. Think the answer was yes provided VLANS are used. Trying to get pfsense setup this week and play with it this weekend. Still trying to isolate my 4 port sfp+ NIC card from unraid.

question, since some sites have magnetic links only, is there an easy way to pass that info to the docker via windows 10 or linux?

any idea what ports to forward?

anyone get this to work with the crome extension?

is it just me or is sonarr v3 having issues with ombi?

thinking of it myself. 2 things I am looking at 1. I hope they come out with a hba card that utilizes the 4.0 lanes and can do 16 drives, not like the ones now with a max of 6 before additional hardware. 2. I am going to get one anyways, I am looking at a dedicated plex/emby setup anyways and if this does not work with unraid I will just re purpose it for the plex/emby server.

default password? tried admin/password but nothing

I haven't dug into it but unraid ip is 192.168.1.8 I go to remote site and input 192.168.1.8:8080 I can bring up sab. Create a network location of //192.168.1.8/cache I can browse the cache drive, or any drive of that matter. the goal was for me to manage the server while away and add more content using the bandwidth from the 2nd location. I am using the unifi built in site to site, might look into openvpn as I can do the same thing in theory anywhere I have internet connection. Plus my laptop has built in cell modem, just need sim card.

just to give an update. connected to the same network my unraid server is on, deluge works fine. The problem is the site to site vpn provided by the unifi usg devices. all other dockers with the exception of plex and deluge work on the other end of the VPN

it is in bridge mode, that is the ip I use to log into unraid

changed it back to 192.168.1.0 and nothing ifconfig br0 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.8 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::6821:7dff:fe0b:679a prefixlen 64 scopeid 0x20<link> ether 00:25:90:50:30:0b txqueuelen 1000 (Ethernet) RX packets 533719233 bytes 1710461864114 (1.5 TiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 99910465 bytes 9144509531 (8.5 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

I am having issues. Everything seems fine but I can not get to the webui unifi usg---> switch to unraid everything was working fine using isp equipment but no longer using it. Do I need to port forward the port? and what port? Quck update, gave the docker a separate ip and it works, well except for trying to get radarr to connect to deluge log.txt

should be stated above. /mnt/cache/appdata/data/ I left it alone for a week as I was out of town. came back and the shares are still there.

I haven't completely narrowed it down to a sab issue but so far it is pointing to it I was having issues were all my shares will disappear. If I go to each disk then they are all there. To rule out some sort of issue I wiped my flash drive, transfered the pro key over, re assigned all drives to were they should be. I then proceed to install only 2 dockers. Sabnzbd and radarr. after a few hours again the shares were gone. Right now I only have radarr runing and everything seems fine. /data = /mnt/cache/appdata/data/ /config = /mnt/cache/appdata/data/

the plan was this, have a unraid machine that just runs plex/emby and stores all the media with gpu transcoding, if needed the server could potentially creature the isp connection. Currently my isp isn't even close to this speed but in the future who knows. If I use current hardware/drives and take the performance hit unraid has can I saturate this connection? I know other systems like ZFS and the like can do 10gbps but at the cost of having to have it all at once and not expand as needed like unraid. I am using my 2nd key I got a long time ago to set this up. New everything from case to hard drives. its also do I save up and use freenas to fully utilize my isp connection or can found this the 12TB IronWolf Pro we're testing today provides 250 MB/s and the 2TB delivers just 195MB/s with 1000mbps ~ 125MB/s this everything should work. My orignal thought was unraid--->switch---plex server----back to switch then network/internet. By combining both unraid and plex server like I have now the data transfer in the machine should be able to handle a lot more. trying to get the best performance using some stuff I have aleady and expand/upgrade my nas as needed.

your isp connection is 1000/1000mbps you have a unraid server with modern hardware and full 7200rpm drives ironwolf pro/wdgold utilize full pro key with 28 data drives and 2 parity. only run plex/emby dockers with possibly some other plex/emby related dockers. no sonarr/radarr/usenet ect. tautulli would be an example of a docker with the plex docker 2 share, tv and movies because unraid has a performance disadvantage compared to others, but you have the ability to mix and match different drive types, sizes, ect. could one fully saturate your isp connection when using plex/emby? I am thinking of also adding a gpu to the setup. 3 raid cards+onboard sata and a gpu means I need a motherboard with at least 4 slots to fit everything.

looking at transferring the meta data like posters to my SSD drive. What settings would I do?