tazire

I just cant get the onlyoffice document server running through https:// rather than http://... I have tried everything suggested in the OP. My webui is defaulted to http://[IP]:[PORT:80] my ports are assigned to 8092 - 80 and 4435 - 443. It is working with the above UI as is. but nothing else works to get it working with https://... I have tried https://[IP]:[PORT:443], https://[IP]:[PORT:4435] I have also tried changing the ports to those shown in the OP but still nothing im afraid.

I have been using this with Rocket chat. but just in the last few days it has stopped working. I keep getting the following re occurring in the logs. {"t":{"$date":"2020-12-04T11:46:09.052+00:00"},"s":"I", "c":"STORAGE", "id":3856202, "ctx":"IndexBuildsCoordinatorMongod-2","msg":"'voteCommitIndexBuild' command failed.","attr":{"indexBuildUUID":{"uuid":{"$uuid":"7d0cfc2d-1a22-40fd-88fa-bc7740c41fd7"}},"responseStatus":{"operationTime":{"$timestamp":{"t":1607082359,"i":1}},"ok":0.0,"errmsg":"command voteCommitIndexBuild requires authentication","code":13,"codeName":"Unauthorized","$clusterTime":{"clusterTime":{"$timestamp":{"t":1607082359,"i":1}},"signature":{"hash":{"$binary":{"base64":"w16K3Ax9dNrRM28e4KL7aAJD+5Y=","subType":"0"}},"keyId":6861917765322670082}}}}} certain variables change but its the same over and over again. I have tried to delete the docker and image and reinstall but just goes back to the same thing. Rocket chat obviously wont start without it.

Ah.... that cli command is what i was missing.... if you try login without the command it doesnt asked for the 2FA code and was giving me a login failed everytime!!! thanks very much for the help. Up and running now. EDIT Unfortunately it still doesnt work very well for me at all. I can close the console after i login or i just cant get the login in details anymore... login just wont work after than initial login. restarting the container has a similar effect. Only thing i seem to be able to do is edit the docker and start fresh with it.... And then on top of all this no matter what i try i just cant get anything on my network to use the bridge. I think the fact i get this issue every time i start the docker might show there is some underlying issue with my container. Think im going to give up on this again for now. Thanks again for the help though.

I literally just downloaded the docker from CA and left most of the launch details as it was. Any chance you could do a step by step?? I dont need it to work for clients on a vpn or anything... just a working container would be nice! XD It does say CLI mode in the logs

Did you ever get this working properly? I have been trying to get this working too. I can get the docker up but just cant get a net connection what so ever. I cant ping anything through it. And because of that i cant actually log in to the protonmail account.

just fyi. I was onto live chat with PIA about this issue... just to get an idea if its something they are working on. This was the response i got... Cipher handling for the data channel cipher has been significantly changed between OpenVPN 2.3/2.4 and v2.5, most notably there are no “default cipher BF-CBC” anymore because it is no longer considered a reasonable default BF-CBC is still available, but it needs to be explicitly configured now. Im guessing this is clearly something they need to configure and have not done so properly.... And this was just the fobbed off response?

I always have used that username and pw. Most recent update seems to have revealed that I was wrong. back to the same issue as before. facepalm!

Well crap! Sorry about that. With a bit of luck if they have updated certain server files maybe it's just happening on a 1 by 1 basis? Swiss server files in the ovpn file pack defo wasn't working and the one in the generator defo is. At least for me.

I've found the fix for the issue.... PIA have not updated their stack of ovpn config files. You need to go into their config file generator ( https://www.privateinternetaccess.com/pages/ovpn-config-generator ) and generate the .ovpn file for your particular server. I did this and replaced it with the existing .ovpn file and its working as it should... no need to make any changes to the file. EDIT Just FYI... I chose nextgen servers and openvpn Version 2.4 or newer... and windows platform (by accident but it worked)... Switzerland server

does anyone know if PIA even realise this issue? Is it something they are actively working on or even in a queue to be fixed?

Had to use this to get it back up and running. the suggested answer given before just didnt work for me at all. i tried several servers and standard and strong files but couldnt get it working unfortunately. this will do as a temporary fix. EDIT Just an FYI and may have absolutely 0 to do with this but, on privoxyvpn I updated my files replaced everything except credentials.conf and it just worked. I didnt edit anything in the .ovpn file. I used the swiss server and was using the strong files. These however do not work with sabnzb for me.

The commands are for the Unraid terminal not the docker console.

i just followed the manual update process shown on the first post.

Just a quick question... I have just updated to v20. I got the following warning in relation to the encryption... There are some warnings regarding your setup. The old server-side-encryption format is enabled. We recommend disabling this. For more details see the documentation. Which goes on to tell me to check files and then disable encryption... I have scanned the files as suggested but im just wondering should i decrypt the files rather than just disable the encryption as suggested? Or what is the best way to deal with this? I tried searching the thread for this but didnt see anything about it. cheers

Just to give you some tips i have found to work for me if you can do it ofc. I have all my nextcloud data on dedicated ssd's and the appdata and database running on an nvme. these changes improved my experience so much. everything was super snappy.. all users have also been asking what i have done as their experience has been greatly improved also. I am still running mariaDB and havent migrated that... its possible that may improve things further for me but i havent felt the need as things are very very snappy now.

I had a quick look at it there. very nice... ill have a proper go of it a bit later when i have an hour to give it. cheers for the info.

Using your plugin will it just update the driver? Or would i have to remove the linuxserver plugin then install yours???

ah ok.... cheers for the response. I dont really want to update to the beta version of unraid just yet. CPU is ok to deal with it for now until the linuxserver plugin gets updated. Thanks again

I just updated to the latest release of this and I am finding that the hw transcoding isnt working like it used to. It seems to have gone back to encode only? I am seeing very high CPU usage as a result. Maybe its just me or randomly the media being watched atm cant hw decode. just curious if anyone else is seeing this?

Just curious if you ever got this working? id really like to get this working too.

Can you do this through the console?

I restarted my rocketchat container and now i get the following errors in mongodb and rocketchat doesnt load. {"t":{"$date":"2020-08-16T16:37:14.589+01:00"},"s":"I", "c":"ACCESS", "id":20436, "ctx":"conn19","msg":"Checking authorization failed","attr":{"error":{"code":13,"codeName":"Unauthorized","errmsg":"not authorized on rocketchat to execute command { serverStatus: 1, lsid: { id: UUID(\"df64c333-b79f-4986-a56f-0cc3968da9e4\") }, $clusterTime: { clusterTime: Timestamp(1597592229, 1), signature: { hash: BinData(0, 62B136C07F343273AEB323B4EE66340A7973F544), keyId: 6858676383569149956 } }, $db: \"rocketchat\" }"}}} I havent changed anything.

Anyone using the android app able to open linked channels from messages? ie someone has put #channel in their message but when i click it I only get the channel description and i dont get brought to the channel itself. I cant see anyway to use this to access the linked channel. Is this something im doing wrong? Just wanted to check here before i go to the github and report it. Just FYI i have tried both public and private channels with the same results. Everything else works perfectly and i will be moving from discord to this once i have this sorted. Very nice video from Spaceinvaderone as always

got a weird issue with sonarr atm. I have the connection setup correctly apparently. however whenever i try to add a tv series i get the following error. [41m[30mfail[39m[22m[49m: Ombi.Api.Api[1000] StatusCode: BadRequest, Reason: Bad Request, RequestUri: http://192.168.1.18:8989/api/series/0 [41m[30mfail[39m[22m[49m: Ombi.Api.Api[1000] StatusCode: BadRequest, Reason: Bad Request, RequestUri: http://192.168.1.18:8989/api/series/0 [41m[30mfail[39m[22m[49m: Ombi.Api.Api[1000] StatusCode: BadRequest, Reason: Bad Request, RequestUri: http://192.168.1.18:8989/api/series/0 The Ombi GUI will act like everything went fine and that the addition is being processed. But the series will never actually get added to sonarr. I cant try add the series again through ombi as it says it has already been requested. I can manually add series myself through sonarr and all works fine. that end it appears. EDIT*** Just to add to this I have found more info for this. Its some issue with the links as I tried to just click on links to spacific tv shows and it trys to connect me to an invalid link. For example... when i click the game of thrones link it trys to redirct me to https://www.imdb.com/title/http://www.imdb.com/title/tt0944947// when it should be https://www.imdb.com/title/tt0944947/ I have no idea why it would do this or what i can do to fix it? but this seems to be why the series addition is failing.

fixed my issue... i deleted the perms document and restarted. all back working and i can edit everything that was causing issues.