Kewjoe

Awesome, thanks!

Hi Everyone, So I've read every single post in this thread (yay me!). The reverse proxy stuff and configurations all make sense to me. I have two other use cases that I'm wondering about. 1. Can I use the certs created by LE for my VPN Server on my router (OpenVPN)? 2. Can I use the certs created by LE for use in Emby Server? This wouldn't be a reverse proxy, it asks for a certificate in the settings, I'm hoping i can just point the setting to the cert folder, or something along those lines. Thanks!

Your system status is strange for me. Mine shows cpu utilization for each core/thread. I don't see how fast they are running. Is there a setting to change that? i checked everywhere and couldn't find anything.

Thanks for checking. Glad it's not just me

No, this is on a Windows 7 laptop. i tried it in Firefox, Chrome and IE and all are doing the same thing.

I have a strange issue. When I'm in the manage section, under playback, then transcode. If i try to make any changes and click save. it says "Please fill in this field" but it's pointing to the top left of the screen. i don't see any section that isn't filled out. It won't save, if i move to a different tab and go back it forgets all of my inputs. Anyone else experiencing that? i've tried restarting emby to no avail. I'm on the latest version (3.0.5986.0)

this app has been great. just need to find time to set up a openvpn server on my router and my use of this app will grow even more

Hi Aptalca, Thanks for your work on these docker apps. Question about DigiKam. I noticed they released 5.0 recently, i set my edge variable to 1. Is that all i need to do? Or would the docker have to be updated by you first before something like 5.0 would be available to update to? Thanks!

Woohoo, it works now! Did manual, left it as your new default of 10 seconds and that did the trick. Thanks! Sent from my HTC One using Tapatalk

Sounds good. Thanks! Sent from my HTC One using Tapatalk

Whoops. Definitely not using bridge on the server Sent from my HTC One using Tapatalk

No, not using bridge on my router. Have it set to Wireless Router (the other options are Repeater, Access Point and Media Bridge). I updated the app. Tried auto, it went through all the ip address on my subnet. Didn't find my server. Tried manual, added my server's IP (with no http) and it didn't find it either. My router is an Asus RT-AC66U running AsusWRT-Merlin 380.57.

Yes, internal Wifi for me too. It shows the IP address of my phone (internal network IP)

I bought this today. I can't seem to get it to connect to my unraid box. First tried automatic and it couldn't find anything. I tried with user/password and without. Then I tried manual and put my server's ip address and same result. No server added. Any advice? My phone is connected to my network, I can get to my box through a browser. Edit: forgot to add, my server is running 6.1.9 Sent from my HTC One using Tapatalk

Broken for me too. Was working fine for months. Decided to update and it's not working. Tried rebooting the server and forcing a reinstall. Still nothing. I checked my settings, nothing has changed. I get this in my logs: 2016-03-15 22:41:59,396 DEBG 'start' stdout output: [crit] LAN network not defined, please specify via env variable LAN_NETWORK 2016-03-15 22:41:59,397 DEBG fd 14 closed, stopped monitoring <POutputDispatcher at 47037797600504 for <Subprocess at 47037797464400 with name start in state RUNNING> (stderr)> 2016-03-15 22:41:59,398 DEBG fd 9 closed, stopped monitoring <POutputDispatcher at 47037797600072 for <Subprocess at 47037797464400 with name start in state RUNNING> (stdout)> 2016-03-15 22:41:59,399 INFO exited: start (exit status 1; not expected) 2016-03-15 22:41:59,400 DEBG received SIGCLD indicating a child quit Edit: just caught the change from LAN_RANGE to LAN_NETWORK. That did the trick. I'm up and running now.

Hi All, First, thanks Binhex for the great docker apps! I'm all set up with the Deluge+VPN app, but I'm having some speed issues. I was on unRaid v5 with Transmission and VPN (PIA). On my 250mbit connection, I'd get down speeds around 80mbit. With unRaid v6 and Deluge+VPN, I'm only getting 2 mbit. I've been using the deluge container for about a month now, so it's not a small sample size. I'm using the same VPN server from PIA. I've tried others with no difference. I checked all my ports are mapped correctly. I went over my settings several times and they seem optimized for my connection. Anyone have any other ideas? Thanks!

Not sure if this will help your case. But when I have this problem, I always follow this guide and it helps: http://lime-technology.com/forum/index.php?topic=1905.msg13461#msg13461

Parity is re-built. So far everything is working from both drives. Looks like I'm back up and running. I'll keep a close eye on things. Thanks again for all the help Garycase and dgaschk!!!

I just realized I was calling it "write errors" and I should have just used "errors". I was basing on what I saw on the dashboard. My parity drive and disk4 showed a lot of errors, but disk6 was redballed with 0 errors. Unfortunately, I did not get the syslog from that event because when I tried troubleshooting, everything started locking up. GUI went down, even commands i was running on the console were just freezing, i had 4 sessions open trying to manually bring the array offline and have a clean shutdown. Ultimately it did not shut down gracefully. I should have manually extracted the syslog before attempting anything. My mistake. The syslogs I attached were after the fact. I'll continue to closely monitor things once I'm back up and running. I've been slacking lately on paying attention. It's been working so well the last 6+ months, I got lazy.

Hi dgaschk, it looks like one of my SATA controllers went bad. The 3 drives in question were connected to it and nothing else was. I've since moved the 3 drives to my 8 port controller and followed Garycase's advice. I ended up verifying the red ball drive in my windows machine with the linux reader. Copied a huge portion of the data over and had no issues. Did some spot checks, no problems found. I ended up creating a new config and I'm at 60% of the parity sync. I'll have to try to verify if the controller is bad, but since I don't have an immediate need for it with my 10 drives spread over the 4 onboard and 8 on the other controller, I'll likely leave it out. When I need to expand, ill buy another AOC-SASLP-MV8. Thanks for all the help garycase and dgaschk! I'll change the subject to "Solved" when my parity is finished and i verify that I'm back up and running.

Nothing is currently mounted, should i mount disk6 to try the copy to /dev/null? I assume yes.

If i do the copy to /dev/null the desired outcome is that it completes successfully. A bad drive would fail at some point, right? Thanks again for all the help!

Last question before I take the plunge. The evidence I have is that the controller was the culprit. I've since moved the 3 drives to my other controller. Parity and Disk 4 had errors at some point this week. I run monthly parity checks and the errors could have been from then. I'm not sure at this point. Disk 6 was red balled with no errors. All 3 drives passed the short and long smart tests. Based on this, i feel more inclined to start a new config and rebuild the parity. Is that the right move here? I'm not sure if there is enough information to make a 100% correct decision, but based on what I have, what would you lean towards? rebuild parity? or try to rebuild disk 6? Thanks!!

Awesome! Just to be clear, the steps are 1) move to other controller 2) follow your steps to rebuild the red ball drive 3) verify data with my backup in case any of the parity was damaged with the write errors. Sounds about right?

Thanks for the reply. What if I wanted to move these 3 drives to a new controller? I also have a Supermicro AOC-SASLP-MV8. It has 4 ports open, I can migrate them there. What would be the steps to do it without causing any chance of losing my (hopefully) valid parity?