david279

Using VLANS helps with the issue but if not you get problems. The has been a discussion about it in the wireguard post.

Are you running the docker using a custom ip? I had to change it to host for me to connect. Seems there is a problem with custom ip br0 on 6.8

All my kext are in the clover/other folder and it seems to load everything correctly. I see lilu and whatevergreen in kextstat. Im running clover 5090 and have updated to 19A602. I did read kext injection was broken in 5093... I dont see MCEReporter kext in kextstat at all but it boots up ok...I used the kext from here.

Madness I say...

Nice work

What GPUs are you using?

This may come down to the client. My Note 9 get internet when connected to my wifi/wireguard but my laptop running pop os only gets lan and no outside internet when I'm connected.

default via 192.168.29.1 dev br0 metric 212 10.253.0.2 dev wg0 scope link 10.253.0.3 dev wg0 scope link 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 192.168.29.0/24 dev br0 proto kernel scope link src 192.168.29.140 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown tower-diagnostics-20191013-1619.zip

yea is the same issue i am having. When wire guard is active i cannot connect to dockers with a custom ip. This is from my normal network not the vpn. The connection times out.

So this is why my custom ip docker where not working.....Turned off wireguard and back all good. Gonna figure this one out...

The only thing I can see with your VM is the vmxnet3. I would change that to e1000-82545em. The upload on vmxnet3 has been super slow for some reason.

Set the allowed IPs in your wireguard app to "0.0.0.0/0, ::/0" that will allow you to get to your server.

Dippin my toe all the way in on this one..

Look at this post

I had 4k60 working with high Sierra using a gt 1030 but need high quality HDMI 2.0 cables. Cheap cables just won't get it.

Ok cool my pcie card has a usb connection that has to be made for Bluetooth to work, I actually plug it into a usb port on a passed through usb 3.0 card.

What kext are you using period? Did it shutdown normally before installing? I find the NullCPUpowermanagement.kext can cause issues with shutting down and rebooting. Are you using it?

Im using a wifi card and shutdown without issue. What kext are you using?

There are some clover gcow image you can use in this threat that will work just look back a couple of pages.

You can upgrade from Mojave or a fresh install just make sure your clover is updated in the 5000+ versions. I'm on 10.15.0 right now. Updated up from the development betas.

Stub the rx 480 from the system

@hygoggxSee this line <topology sockets='1' cores='12' threads='1'/> Delete that then try again

Use hackintool to see what the GPU is? Mines is s08 and really didn't set anything about it in the config but I do use whatevergreen kext. The GPU issue you are having is the AMD GPU reset bug. It's a big issue with AMD GPUs.

You can use xcode or propertree to copy the info over. You can just copy and paste the info out of your clover plist by hand, that's the way I did it. Read the opencore vanilla guide for what most of the values mean when you take a look at the opencore plist.

@Leoyzen Sadly it still gives me no display after the update. The system thinks its connect to a iMac projector for some reason. I switched to MacPro 6,1 and its all back working just no hardware accelerated video. I really think the issue maybe my jankiny rx560D(https://www.techpowerup.com/gpu-specs/dell-rx-560d-oem-oc-2-gb.b5128) witch shows up as a rx460 and really is a dell OEM part that you can only find on eBay. I do have a rx 570 pulse on the way though so i may try again when it arrives. It still works in Catalina though and rumor has it that the release is next friday so Im ready to just full time to Catalina.