HNGamingUK

Hello, Wondering if anyone can help me with an issue I am having with my Cache pool. Basically after a reboot today, when I started up the array I saw the following: Along side this I see the below asking me if I want to format the primary cache drive. Now obviously I do not want to as I don't want to loose data. I then ran a btrfs check --readonly /dev/sdb1 which came with the following output: Opening filesystem to check... Checking filesystem on /dev/sdb1 UUID: ab81d341-8531-4c08-8fa1-645911b301fd cache and super generation don't match, space cache will be invalidated found 310226411520 bytes used, error(s) found total csum bytes: 0 total tree bytes: 90783744 total fs tree bytes: 29900800 total extent tree bytes: 60588032 btree space waste bytes: 16964433 file data blocks allocated: 156191051776 referenced 154714845184 I then did a btrfs check --repair /dev/sdb1 which showed the following: Starting repair. Opening filesystem to check... Checking filesystem on /dev/sdb1 UUID: ab81d341-8531-4c08-8fa1-645911b301fd [1/7] checking root items Fixed 0 roots. [2/7] checking extents incorrect offsets 12845 12358 incorrect offsets 12845 12358 incorrect offsets 12845 12358 incorrect offsets 12845 12358 Shifting item nr 94 by 487 bytes in block 1254219743232 Shifting item nr 95 by 487 bytes in block 1254219743232 Shifting item nr 96 by 487 bytes in block 1254219743232 Shifting item nr 97 by 487 bytes in block 1254219743232 Shifting item nr 98 by 487 bytes in block 1254219743232 Shifting item nr 99 by 487 bytes in block 1254219743232 items overlap, can't fix check/main.c:4336: fix_item_offset: BUG_ON `ret` triggered, value -5 btrfs[0x42f27d] btrfs[0x43842d] btrfs[0x438960] btrfs[0x43950c] btrfs[0x43d495] btrfs(main+0x90)[0x40ecc0] /lib64/libc.so.6(__libc_start_main+0xeb)[0x1473a7ed6e5b] btrfs(_start+0x2a)[0x40ef4a] Aborted So at this point I am stumped on what to do to resolve the issue. I have been able to set the primary cache as no device and then start the array at which point it seems the secondary cache drive is working fine and has all the data I need. However preferably I do not want to run at a reduced redundancy for an extended period of time. If I am infact being stupid and do need to format the primary cache drive to then make it re-sync the raid I can do that. Any help infact would be very much apprriciated. Appologies this post is VERY long, I just wanted to make sure that I covered all the options I could find before asking for help.

For Proxmox here is the documentation: https://pve.proxmox.com/wiki/Resize_disks Although looking further it may seem that Proxmox uses a different vdisk handling method not sure myself. I just know it is possible with Proxmox both in the GUI and via CLI

Proxmox would be my example of live disk increase, it uses QEMU KVM.

Hello All, I was wondering if someone will be able to help me. I am running a Windows VM and preferably don't want to have to turn it off to increase the disk. From what I can see it can't be done via the GUI? Is this a new feature that needs to be requested? In either case what would be the best command to run to increase the disk? Many Thanks

Hello, Is anyone having issues with PIA (specifically the france enpdpoint) I am getting the following: 2020-03-31 07:16:56,249 DEBG 'start-script' stdout output: [info] PIA endpoint 'france.privateinternetaccess.com' is in the list of endpoints that support port forwarding 2020-03-31 07:16:56,249 DEBG 'start-script' stdout output: [info] List of PIA endpoints that support port forwarding:- [info] ca-toronto.privateinternetaccess.com [info] ca-montreal.privateinternetaccess.com [info] ca-vancouver.privateinternetaccess.com [info] de-berlin.privateinternetaccess.com [info] de-frankfurt.privateinternetaccess.com [info] sweden.privateinternetaccess.com [info] swiss.privateinternetaccess.com [info] france.privateinternetaccess.com [info] czech.privateinternetaccess.com [info] spain.privateinternetaccess.com [info] ro.privateinternetaccess.com [info] israel.privateinternetaccess.com [info] Attempting to get dynamically assigned port... 2020-03-31 07:16:56,254 DEBG 'start-script' stdout output: [info] Attempting to curl http://209.222.18.222:2000/?client_id= 2020-03-31 07:16:56,282 DEBG 'start-script' stdout output: [warn] Response code 000 from curl != 2xx [warn] Exit code 7 from curl != 0 [info] 12 retries left [info] Retrying in 10 secs... Settings:

May I ask why you are going for the smaller brand VPN providers as apposed to say PIA, AirVPN or NordVPN?

Agreed, it has been a few months now and no 6.9 rc yet...

Thanks for the info, I have done this and changed the required settings in ltConfig. I can confirm that the speeds are now much better in the region of 45 - 50MB/s which is the max speed of my connection.

Okay so I use the Label plugin and it currently has: "enabled_plugins": [ "Label" ], Do I just change that to: "enabled_plugins": [ "Label" "ltConfig" ],

Well I was able to build the plugin and it shows on the plugins tab. The only issue I have is I can enable the plguin in the plugins tab and do the "Apply settingsd on startup", I make sure enable_outgoing_utp and enable_incoming_utp are disabled. However when I reboot the docker it disables the plugin in the plugins tab...

Okay so I have downgraded to the version you mentioned however I did try and be lazy and use the egg https://github.com/ratanakvlun/deluge-ltconfig/releases Which did not work... If you could kindly describe on what needs to be completed? (On a side note I did downgrade to 2.0.3_23_g5f1eada3e-1-03 but my browser bar is still showing "2.0.4.dev20")

Anyone else been having speed issues with this docker and PIA? I have done a fresh install of the docker and tried each of the endpoints that allow port forwarding. I then tested using the ubuntu 19.10 iso torrent and the max I got with each endpoint was 1.8MiB/s I remember before getting 10MiB/s if not more, I have no idea what has changed though.

From what I have seen anything that says "Google Auth" you can use Authy.

Thanks Squid the VFIO Bind option has worked and the VM now boots without any issues.

Okay, I'm assuming that will also need a reboot?

Hmm and how would I go about passing the USB Controller of the GPU to the VM as that doesn't look to be an option within the GUI. I'm guessing I will need to switch to XML view and add it?

Hello, I am getting the following error when trying to pass through my RTX 2060 Super to my virtual machine: "internal error: qemu unexpectedly closed the monitor: 2020-02-01T14:27:59.749795Z qemu-system-x86_64: -device vfio-pci,host=0000:01:00.0,id=hostdev0,x-vga=on,bus=pci.0,addr=0x6: vfio 0000:01:00.0: group 1 is not viable Please ensure all devices within the iommu_group are bound to their vfio bus driver." Please see image of my iommu groups: Virtual Machine configuration: Looking on some other posts it seems to suggest that I will need to turn on PCIe ACS. Wanted to see if anyone had any other suggestions as currently I'm running a part sync as I'm adding a second parity drive. So can't reboot at the moment.

Thought as much, one of the script has been running since this morning at 8:00 and is at 7.2KB. Will need to watch it over the next 7 days and see how large the files and rotated logs get. All it stores in the log is when the move starts and when it finished with how long it took in seconds. So 2 lines. The script is running every 10mins unless it is already moving. So it has the potential to write 2 lines every 10mins.

Hello, I have 2 scripts that automatically move files from local storage to GDrive. I currently have the logs going to a user share under /mnt/user/rclone/logs I also have setup logrotate in /etc/logrotate.d to rotate the logs daily and keep 7 of them. I wanted to know if it's okay to store logs in /var/log instead?

One thing I just noticed is that when you echo the current PID into the pid file you use the full path instead of using the $PIDFILE to reference it? Equally the same once the script has run I should put rm -f $PIDFILE at the end

Sorry I'm failing to understand how exactly that if statement works. I think if I am understanding it correctly it will check if the pid file exists then if it does it will compare the current pid with the pid in the pid file. However I'm unsure what it does after that...

Hello, How would you go about doing this exactly?

Okay, so I added the following to the start of the script that should work right? if pidof -o %PPID -x "$0"; then exit 1 fi Just thought I should add that I'm planning on having 2 scripts one for my TV Shows and one for Movies.

Hello, I have a script which moves TV shows from local storage to my Google drive crypt. Can someone explain how the scheding works? For example I want to set the move script to run every 10mins. However if there are a large amount of files in the directory it could take a while to finish. How does user scripts handle this? Will it just not run the script or do I need to add some code in my script to handle this? Hope this makes sense.

I love how easy it is to add more storage capacity compared to regular RAID. I also love how much unraid has improved over the years. In 2020, I would like to see multiple arrays and possibly multiple cache pools. Would be nice to have a share span those said arrays too. That way someone could have 60 or more drives and store close to or more than a 1PB in a 4U chassis.