Snipe3000

I'm running into this same issue. For some reason I have two transcode settings in my plex docker config. Does that mean something is wrong with my linuxserver version of plex? Is there a way to clear the /tmp folder? I'm guessing this is something I have to do periodically, sense plex isnt doing it. /tmp in the root of Unraid doesnt have anything plex related in it.

running "ls /dev/serial/by-id" says "No such file or directory" The diagnostics are attached unraid01-diagnostics-20230411-1649.zip

Using lsusb I get this: The issues Im having is my zooz zwave stick works fine if I don't use the serial only option, but Z-Wave JS UI doesnt work unless I use serial only. If I do use serial only, zwave doesnt work in HA's integrations area anymore. Then theres my skyconnect stick, Ive never been able to get it work properly, it always fails configuation, been trying for weeks. Currently I flashed it with Multi-pan firmware, but not having much luck there either. This has all been very messy

virsherror = "" virsherror = 1 virsh = "error: Failed to attach device from /tmp/libvirthotplugusbbybusHome Assistant-002-017.xml error: internal error: unable to execute QEMU command 'chardev-add': Failed to add chardev 'charua-serial002017': Could not open '/dev/serial/by-id/': Is a directory virsherror = 1 virsh = "error: Failed to attach device from /tmp/libvirthotplugusbbybusHome Assistant-002-016.xml error: internal error: unable to execute QEMU command 'chardev-add': Failed to add chardev 'charua-serial002016': Could not open '/dev/serial/by-id/': Is a directory I see that whenever I try to connect my two devices as serial

I'm seeing a Virsh Error on one of the USB devices I'm passing into a VM, does anyone know what that means?

Radarr is now showing this error: ```You are using docker; download client NZBget places downloads in /data/usenet/completed/movies but this directory does not appear to exist inside the container. Review your remote path mappings and container volume settings.``` Setup was done using TRaSH guides. I have Lidarr and Sonarr setup the exact same way, but only Radarr is giving me this error. Has anyone else ran into this? I checked the logs and I'm seeing the same error spammed over and over again: [v4.3.2.6857] code = Corrupt (11), message = System.Data.SQLite.SQLiteException (0x800007EF): database disk image is malformed database disk image is malformed **Update** I restored the radarr config from my backups, that seems to have fixed the problem.

I'm having this exact problem. No solution?

Was there a better way for me to do this move, or is this just the way to do it?

I'm doing a large move right now between shares using Unraid's built-in file system explorer. Both shares are setup to use the cache pool. It seems it is doing a copy operation first. I see a message at the bottom of the Move window saying "This copies all the selected sources", which seems strange. This "move" operation is also filling up the cache drive instead of doing the operation directly on the array. Does all of this sound normal?

I'm running into this exact issue, but restarting it has not yet fixed it.

NZBGet is saving files owned by 'Nobody', which I don't have access to. Is there a way to have it set owner to 'everyone' so I can access what I download?

Heres a fun thing my Nextcloud is doing now whenever I try to run it. Does anyone know what might have happened?

I have a bit of a problem. I recently updated my Unraid server and then noticed my NZBGet History was completely gone. so I checked the appdata folder to see what happened. In there NZBGet only stores the config file. I thought that was odd, so I restored my appdata backup from the previous day and NZBget was still pretty much empty and my History did not come back. Some new items have downloaded and still that folder only has config in it. Where is the history being saved to? and can I restore my old history? **Update** I found the folder holding History. It seems that it was reset for some reason, but sense it wasn't in appdata, I don't have a backup of it. It looks like the folder with all my queue files are still there, but they don't show up in NZBGet anymore, I'm assuming they need the "history" file in order to show up in NZBGet's completed area.

I setup proftpd for sftp as shown here: Whenever I try to connect to it via WinSCP using sftp protocol, I get this error: ! 2021-05-23 21:25:41.954 Using username "nocturnion". . 2021-05-23 21:25:42.090 Server offered these authentication methods: publickey . 2021-05-23 21:25:42.090 No supported authentication methods available (server sent: publickey) . 2021-05-23 21:25:42.090 Attempt to close connection due to fatal exception: * 2021-05-23 21:25:42.090 No supported authentication methods available (server sent: publickey) . 2021-05-23 21:25:42.090 Closing connection. * 2021-05-23 21:25:42.125 (EFatal) No supported authentication methods available (server sent: publickey) Does anyone know why this is failing?

Does anyone have some pre-made .img files I can use?

I'm running into the boot loop on a fresh install. I've already tried uninstalling dockers and scripts and trying again and again, but still the same result. I've been looking through this topic and it looks like there is still no solution for this. Has anyone found any new information?

Whats the update process?

Ok I think I got to the bottom of it. The "My Server" cloud solution Unraid added seems to have gotten enforced when I updated from 6.9.1 to 6.9.2. I can no longer access the Unraid GUI via its local IP address, I have to use the .unraid.net address given to me by Unraid, even if its local. Thats kind of strange. Is there a reason it can only be accessed this way?

I'm having this problem. I updated to 6.9.2 after I setup my nginx proxy manager and pihole with custom IP, after the reboot, I can no longer access the Unraid GUI. The array and all dockers appear to be up and running, and the server screen that boots unraid looks normal. I can access the shares and ping the Unraid server. I just can't access the unraid GUI. Is there a fix for this? How did you pull diagnostics data without the GUI?

I think I'm going to try a different route than letsencrypt

NPM container settings: Router forwarding: netstat from within NPM container: netstat from Unraid:

I havnt had much luck debugging network issues in Unraid, there's no way to get nmap or anything, but my router is setup correctly.

Are there alternative cert solutions that will work with NginxProxyManager? Letsencrypt is kind of a mess and almost always give me trouble when trying to get certs.

Does anyone know a good way to debug NGINX PROXY MANAGER and its failing letsencrypt? I have the ports forwarded correctly, but the logs say Challenge failed for the subdomain I'm trying to add into cloudflare.

Already ran it on appdata. Anyway to fix it?