Jurak

I am running on 6.12.3 and my web gui is very slow to load pages. Mainly docker, main, and dashboard. Any help in figuring this out would be great. The only page that loads fast is the tools tab lol. heimdall-diagnostics-20231008-1050.zip

That fixed it.

Never mind I remember now.

Where would I go to remove the commas?

I have two 4 tb drives that I want to format into zfs. I have stopped the array started into maintenance mode erased the 2 drives. Then stopped the array assigned zfs file system to them started the array and told it to format the two drives. It started then comes back to Unmountable: Unsupported or no file system. I am running Unraid version 6.12.3 right now. Any help would be great. I have attached my diagnostics. heimdall-diagnostics-20230918-1205.zip

Ok I followed Spaceinvaders One's video on repairing XFS file system and the cache drive is now mounted and data is now available.

Ran the GUI file system check and this is what it is showing. Does the blow mean everything is lost? ~Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ALERT: The filesystem has valuable metadata changes in a log which is being ignored because the -n option was used. Expect spurious inconsistencies which may be resolved by first mounting the filesystem to replay the log. - scan filesystem freespace and inode maps... invalid start block 2829587215 in record 331 of cnt btree block 3/33549 invalid start block 2420771162 in record 343 of cnt btree block 3/33549 agf_freeblks 83920841, counted 83914624 in ag 3 agi unlinked bucket 11 is 37097611 in ag 3 (inode=3258323083) sb_icount 1252096, counted 1177344 sb_ifree 70803, counted 357089 sb_fdblocks 286625134, counted 338414693 - found root inode chunk Phase 3 - for each AG... - scan (but don't clear) agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 bad CRC for inode 26263971 bad CRC for inode 26263971, would rewrite would have cleared inode 26263971 - agno = 1 - agno = 2 bad CRC for inode 2189826741 bad CRC for inode 2189826741, would rewrite would have cleared inode 2189826741 bad CRC for inode 2254308065 inode identifier 10387980935659847679 mismatch on inode 2254308065 bad CRC for inode 2254308065, would rewrite inode identifier 10387980935659847679 mismatch on inode 2254308065 would have cleared inode 2254308065 - agno = 3 bad CRC for inode 3243741208 inode identifier 7552285953063714815 mismatch on inode 3243741208 bad CRC for inode 3243741208, would rewrite i node identifier 7552285953063714815 mismatch on inode 3243741208 would have cleared inode 3243741208 bad CRC for inode 3280781721 inode identifier 17873957955880681471 mismatch on inode 3280781721 bad CRC for inode 3280781721, would rewrite inode identifier 17873957955880681471 mismatch on inode 3280781721 would have cleared inode 3280781721 bad CRC for inode 3330512564 bad CRC for inode 3330512564, would rewrite would have cleared inode 3330512564 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... free space (3,4642978-4646096) only seen by one free space btree free space (3,38657840-38660937) only seen by one free space btree - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 2 - agno = 3 entry "Indexes" in shortform directory 2170818481 references free inode 3243741208 would have junked entry "Indexes" in directory inode 2170818481 bad CRC for inode 3243741208, would rewrite inode identifier 7552285953063714815 mismatch on inode 3243741208 would have cleared inode 3243741208 bad CRC for inode 26263971, would rewrite would have cleared inode 26263971 bad CRC for inode 2189826741, would rewrite would have cleared inode 2189826741 entry "GoP-0.xml" in shortform directory 2201749520 references free inode 2254308065 would have junked entry "GoP-0.xml" in directory inode 2201749520 bad CRC for inode 3280781721, would rewrite inode identifier 17873957955880681471 mismatch on inode 3280781721 would have cleared inode 3280781721 bad CRC for inode 2254308065, would rewrite inode identifier 10387980935659847679 mismatch on inode 2254308065 would have cleared inode 2254308065 bad CRC for inode 3330512564, would rewrite would have cleared inode 3330512564 No modify flag set, skipping phase 5 Phase 6 - check inode connectivity... - traversing filesystem ... Metadata corruption detected at 0x46f860, inode 0x190c1a3 dinode couldn't map inode 26263971, err = 117 entry "Indexes" in shortform directory inode 2170818481 points to free inode 3243741208 would junk entry Metadata corruption detected at 0x46f860, inode 0x82861ab5 dinode couldn't map inode 2189826741, err = 117 entry "GoP-0.xml" in shortform directory inode 2201749520 points to free inode 2254308065 would junk entry - traversal finished ... - moving disconnected inodes to lost+found ... disconnected inode 26263975, would move to lost+found disconnected dir inode 86993938, would move to lost+found disconnected dir inode 1137089217, would move to lost+found disconnected dir inode 2209802771, would move to lost+found disconnected inode 2212654973, would move to lost+found disconnected inode 3243741216, would move to lost+found disconnected inode 3258323083, would move to lost+found disconnected dir inode 3306947460, would move to lost+found Phase 7 - verify link counts... would have reset inode 2170818481 nlinks from 3 to 2 Metadata corruption detected at 0x46f860, inode 0x190c1a3 dinode couldn't map inode 26263971, err = 117, can't compare link counts would have reset inode 3258323083 nlinks from 0 to 1 Metadata corruption detected at 0x46f860, inode 0x82861ab5 dinode couldn't map inode 2189826741, err = 117, can't compare link counts No modify flag set, skipping filesystem flush and exiting.

I have been moving everything off my two cache drives. Suddenly my cachetwo drive is not stating its Unmountable: Unsupported or no file system. I need some help to figure this out. It was not done moving everything off. I know the diagnostics may not have much info as I rebooted the system. heimdall-diagnostics-20230824-2230.zip

Ok this time it ran with out errors. So why in the last logs did it only do plex and this time it did everything. I made no changes in the settings. ca backup logs 2.txt

Thats the thing all dockers are supposed to be shut down and backed up but this log only has plex being shut down.l

Just doubled checked I have no scripts that will run for plex. Only scripts I have are for the data on the array.

I was thinking of a place to download the file but yeah that works to lol. CA Backup Logs.txt

In the image blow is the error im getting. I am having a brain fart and dont know where the logs are store for this plug in. Please let me know so I can get those uploaded as well.

That fixed it. Thanks I appreciate it.

Ok noticed that I have not been getting any notifications for a while. Updated to the latest 1.4 and still not getting anything. The logs are just this below. Script Starting Apr 11, 2023 07:20.08 Full logs for this script are available at /tmp/user.scripts/tmpScripts/Plex Precache/log.txt Script Finished Apr 11, 2023 07:20.08 Full logs for this script are available at /tmp/user.scripts/tmpScripts/Plex Precache/log.txt Its this over and over the only difference is the date and time. Any help would be great.

Sorry been locked out of my forum account. Im now back. For some reason that day I left to spend time with my kid and when I got back it was working correctly. Thanks for your help. edited for misspelling

I need help. Each time I go to my URL for my website it keeps taking me to the install screen for choosing language. I choose language again and it says already installed continue to log in. It does this every time I go to my URL. I don't know what I have set up wrong but any help would be appreciated.

Thanks. I will do that once the parity rebuild is done. Thanks.

Just replaced my cache drives 4 days ago and now I'm getting /var/log is full. last time I got this my server had been running for over 30 days. Yes I know I should have had it looked at then but didn't have time. But now its full after only running 4 days. I tried running my diagnostics anonymized but it sat there for over 5 minutes just thinking. But after getting them to download the syslog is full of move file entries. This was back on the 29th when I changed all my shares that I want to run off the cache drives back to preferred. heimdall-diagnostics-20230402-0751.zip

Has their been changes to this docker with Cloudflare? Lately all I get with my websites is a white page Cloudflared docker is throwing many errors. ERR error="Unable to reach the origin service. The service may be down or it may not be responding to traffic from cloudflared: x509: certificate is valid for 21178470731dbb32f34cf6950f14c912.7fa6331778a54cb34a30e868165e52de.traefik.default, not jurak.business" cfRay=767068d868f37b19-LAX originService=https://192.168.1.79:18443 2022-11-08T18:35:37Z ERR Failed to handle QUIC stream error="Unable to reach the origin service. The service may be down or it may not be responding to traffic from cloudflared: x509: certificate is valid for 21178470731dbb32f34cf6950f14c912.7fa6331778a54cb34a30e868165e52de.traefik.default, not jurak.business" connIndex=2

I either get nothing in the popup window or 502 bad gateway. Screen shot below. Any time I run something where the popup window like in the screen shot comes up there is either nothing that shows up in it or I get a 502 bad gateway error in it. Need some assistance with this. Diagnostics are attached. Yes I know I have a failed hard drive. I am in the process of moving everything off that drive with unbalance. Unbalance stated that there were some issues with when it was planning. Recommended I run new docker permissions but that window that opens up is blank so have no clue if its running or not. heimdall-diagnostics-20220907-1104.zip

Having an Issue. In plex I sort the movies by duplicates. I have allow deletion turned on in the settings. I go to get info for the duplicate movie delete one of the files. That movie disappears from the list. A few minute's later it shows back up. Its not actually deleting the files. Need some help on what is causing this.

Ok so I changed the network type from my custom docker network to br0 and now it shows My plex server name in the upper right corner of the webgui but im still getting the same Failed to load content! error. Edit for misspellings.

I can not get this to work at all. It will load the webgui with no issues but I get I have tried everything mentioned in this forum topic and nothing works.

I get this error below. Test was aborted due to an error: Unable to connect to SABnzbd, Connection refused Connection refused: 'http://IPADDRESS:PORT/api?mode=get_config&apikey=API KEY&output=json' Sonarr and Radarr are able to connect with no issues.