VelcroBP

Don't know if it's relevant at all, but I just noticed that Disk 3 is formatted XFS, and all my others are Resierfs. Just wanted to point that out. This drive is the latest one installed.

Is there an easy way for me to tell what applications are writing to the docker.img instead of an Array path? Only Disk 3 shows a SMART error on the Dashboard. Notifications seem to be set to DEFAULT for all disks. I did remove it.

I did not have that set. I just set it to 100GB. I checked all disks. That folder exists on another Disk, but containing one of the other movie files. The .MKV that is on Cache is not on an Array disk

I still have the SASLP-MV8 board installed. As for the critical space issue: I have ~2TB left in the array. My cache was almost full yesterday after several large downloads and issued a warning in the UI. That is what prompted me to notice what was remaining on the cache after Mover ran.

This seems to be the case. I've found that the folder exists on Array disc 8, but only the .nfo file is there. Only the .mkv file is in the folder on Cache. How do I correct this?

Ok finally attached a proper dx zip with mover logs included.

I think my mover or cache config isn’t correct. I have some large downloads that I’m expecting Mover to transfer to the array. Only some of them moved, despite having manually invoked Mover several times. I am expecting the files in the DownDownDown share to be moved, but some remain. I’ve turned on Mover logging and attached diagnostic. mootower-diagnostics-20220220-2016.zip

Will do, thanks in advance! Sent from my Pixel 5 using Tapatalk

thanks for the detailed response. I have ordered a watt meter to determine my system levels To clarify: if I get a replacement battery it will be their official part for my specific UPS model. I understand that I cannot upgrade by simply installing a larger capacity battery. Apologies for that confusion I'm my original post. Sent from my Pixel 5 using Tapatalk

I need to get a replacement UPS. I have only ever configured mine to immediately issue a clean shutdown after more than 5 minutes outage. That said, I think my previous UPS (APC Back-Ups BE550G) is underpowered at only 330watts/550VA. I say this because I just ran NewEgg's psu calculator and it estimates my system draws ~380watts. Does this mean that my BE550G isn't actually protecting my system, or am I not understanding the VA/watts, runtime till shutdown, or other parameters? If that's the case, how do I estimate how much VA/Watts I need out of a UPS? Again I'm just looking for bare minimum protection so my system has time to do a clean shutdown when needed. Any clarification would be appreciated since I'm really confused by all the similar specs out there and varying prices. I'm on a very tight budget and hope to spend the minimum on this (which would be a replacement battery for my current UPS). Thanks in advance!

I have a FD Define R4 sitting around and am wondering if I can easily install my 2 Norco SS-500s in it after removing the stock bays. I thought I’d ask here if anyone has done this already before disassembling my current build to get one of the Norcos out just to test. If it will require any significant modifications to the R4 hen I’m probably not gonna do it right now.

thanks. i rolled back and disabled auto update for that container [emoji1696] Sent from my Pixel 5 using Tapatalk

After the 4.4.0 update I also had my settings reverted to default. I have re-configured and got the incomplete downloads relocated back to the proper directory. However, I have noticed that one particular category (TV-SONARR) seems to be creating 3 subdirectories in the COMPLETED downloads directory. These are named strange (see pic). Only the most recent of the 3 contains ALL completed downloads for this Category (the other 2 are empty). Prior to the upgrade this Category behaved the same as the others and simply moved the completed downloads to the COMPLETE directory as expected.

Apparently my binhex-qbitorrent docker restarted early this a.m. for some reason. After it seems that the default save path and COMPLETE save path settings were reverted to default. This has borked my Radarr/Sonarr configs also, and as such ALL of my pending downloads have been automatically moved into the COMPLETED directory. I'm at a loss as to how I get back to my original config and have these files moved back into the correct INCOMPLETE directory. I've updated the paths in QBT settings, but Radarr/Sonarr settings still display the error: "You are using docker; download client VueTorrent places downloads in /config/qBittorrent/downloads but this directory does not appear to exist inside the container. Review your remote path mappings and container volume settings." Please help! I've had this running since I set it up months back and don't want to have to re-learn and re-configure it all from scratch again.

That did the trick! Thanks a million!

awesome thanks for pointing me to the network config file! I'll try that ASAP! Sent from my Pixel 5 using Tapatalk

Basically looking for any help reverting to default network settings at this point. Sent from my Pixel 5 using Tapatalk

I have recently moved. I have setup my server with the same networking gear as before (modem, router) with the exception of a new dumb switch between it and the router. I can access the main Unraid and Docker UIs fine locally, but have no internet access from the server. This happened once before due to an incorrectly configured 2nd NIC. That time it was resolved by simply porting down the unused NIC, as Unraid seemed to be defaulting to it. I have tried that again this time with no luck. I cannot ping any external address or DNS, but I CAN ping the local router/default gateway (192.168.1.1). I'm attaching diagnostics, as well as a screen of the routing table from Settings>Networking. Please let me know of any other screens to capture or logs to generate. mootower-diagnostics-20211213-1853.zip

I have installed this Docker with default config and the server is running according to Unraid logs and UI is up. I have configured port forwarding via CloudFlare CNAME and corresponding NGinx proxy host. When I try to connect from a Steam client on another PC, the game hangs on the "Connecting To ..." message.

{SOLVED} So I had previously attempted to setup a Docker network routing over my 2nd NIC (eth1). For this I created a VLAN on my router. However that project was abandoned and the VLAN deleted. It seems that for whatever reason after this reboot, the server was defaulting to eth1 and trying to resolve the gateway from the VLAN that no longer existed. I ported down eth1 and all is well now.

No. I can't ping anything outside my network

Diagnostics attached Unraid-diagnostics-20211107-1708.zip

I did with no luck Sent from my Pixel 5 using Tapatalk

Just to be safe I re-copied my API key from Cloudlare and no dice. I think there is a larger issue preventing any internet access from this server at all Sent from my Pixel 5 using Tapatalk