Energen Posted January 24, 2021 Share Posted January 24, 2021 Very nice, thank you for the tutorial. Quote Link to comment
enigma27 Posted January 24, 2021 Share Posted January 24, 2021 Another great video space invader... although cant seem to get it to work.. can login to the webui and add connections but just get a timeout message and cant connect to any rdp connections. any ideas? Quote Link to comment
patm95 Posted January 25, 2021 Share Posted January 25, 2021 Great vid. Is there a way to use RDP without using a password protected account? Also is there a way where the user at the remote PC can see you control the pc in real time? When I got it to work the remote pc would go into a login type screen whenever I was logged on. Then when I was done the user had to log back in. Even if it was the same account. If end user at remote pc could see me work, it would help in troubleshooting. Thank you. Quote Link to comment
wrotruck Posted January 26, 2021 Share Posted January 26, 2021 Great tutorial! I followed it to the the letter and did fresh installs of both swag and apache guacamole. For some reason, I'm getting a 502 Bad gateway error wen I test in a web browser. Any idea what I did wrong? Quote Link to comment
joecool169 Posted January 27, 2021 Share Posted January 27, 2021 8 hours ago, wrotruck said: Great tutorial! I followed it to the the letter and did fresh installs of both swag and apache guacamole. For some reason, I'm getting a 502 Bad gateway error wen I test in a web browser. Any idea what I did wrong? Me too, If I change Guacamole to the proxynet that I setup in previous tutorials I can then access the webui remotely, but I don't have connection to the vm that I setup to control anymore. Quote Link to comment
wrotruck Posted January 27, 2021 Share Posted January 27, 2021 10 hours ago, joecool169 said: Me too, If I change Guacamole to the proxynet that I setup in previous tutorials I can then access the webui remotely, but I don't have connection to the vm that I setup to control anymore. I can't even get a connection on proxynet... The problem seems to be with a swag config somewhere. I'm not very sure where to go looking. Quote Link to comment
joecool169 Posted January 28, 2021 Share Posted January 28, 2021 Got mine working but I'm not sure how. I followed the video guide exactly, spent hours re-checking everything, re-watched the video several times. Tried loads of stuff, different ports, proxynet, everything I could think of. After 2 nights of troubleshooting I put it all back to the way it was in the video and it worked. Normally after I go through something like this I can look back and figure out what I did wrong, not this time. I spent 6+ hours troubleshooting went back to where I started and everything worked. Quote Link to comment
patm95 Posted January 29, 2021 Share Posted January 29, 2021 I got the RDP working. However, I was not able to connect with SSH to unraid. I can connect via Putty. Anyone else have an issue? 1 Quote Link to comment
ra1k_0 Posted February 3, 2021 Share Posted February 3, 2021 Hey @SpaceInvaderOne thankyou for all the videos you make! I'm having an issue when trying to connect via the proxy where I get: 502 Bad Gateway. I have followed the video step-by-step and have the same setup for swag as yourself (swag on proxynet, guacamole on custom ip) Would you have an idea of why I am getting this error? Thanks again! Quote Link to comment
pwn4fun Posted February 16, 2021 Share Posted February 16, 2021 @wrotruck@joecool169@ra1k_0 You need to enable "Host access to custom networks". Settings - Docker - Enable Docker "NO" - "Apply" - click on advanced view - Host access to custom networks "Enabled" - "Apply" - Enable Docker "YES" - "Apply". This should solve the 502 bad gateway issue. 2 Quote Link to comment
wrotruck Posted February 23, 2021 Share Posted February 23, 2021 On 2/16/2021 at 2:13 AM, pwn4fun said: @wrotruck@joecool169@ra1k_0 You need to enable "Host access to custom networks". Settings - Docker - Enable Docker "NO" - "Apply" - click on advanced view - Host access to custom networks "Enabled" - "Apply" - Enable Docker "YES" - "Apply". This should solve the 502 bad gateway issue. That was exactly the problem! Your change worked like a charm. Thank you, sir. You are a gentleman and a scholar! Quote Link to comment
Adam S Posted June 18, 2021 Share Posted June 18, 2021 (edited) Does any one have an idea on how to configure DUO API Keys into Guacamole? As soon as I set OPT_DUO = Y. When I try to login I get "An error has occurred and this action cannot be completed. If the problem persists, please notify your system administrator or check your system logs." I found the configuration in \appdata\ApacheGuacamole\guacamole\guacamole.properties Edited June 18, 2021 by Adam S Solution Quote Link to comment
zyurph Posted July 16, 2021 Share Posted July 16, 2021 I am having an the same issue getting 502 bad gateway on both guacamole and nextcloud. I found that I had "Host access to custom networks" disabled, but enabling it still did not fix it. Is there anything else that could cause this problem? 1 Quote Link to comment
zyurph Posted August 15, 2021 Share Posted August 15, 2021 On 7/16/2021 at 2:59 PM, zyurph said: I am having an the same issue getting 502 bad gateway on both guacamole and nextcloud. I found that I had "Host access to custom networks" disabled, but enabling it still did not fix it. Is there anything else that could cause this problem? I was able to resolve my issue by replacing the docker name on the upstream_app line in the subdomain.conf file to the ip address of the unraid server. This also fixed nextcloud as well. Quote Link to comment
isaacery Posted January 9, 2022 Share Posted January 9, 2022 (edited) Ive enabled TOTP but when i login i get "TOTP.INFO_VERIFICATION_FAILED". I do not get prompted to add MFA via the QR code, but just a note saying "TOTP.info_enroll_required". What am i missing here? EDIT: the fix is to clear cache in browser. Edited January 9, 2022 by isaacery Quote Link to comment
dja Posted February 28, 2022 Share Posted February 28, 2022 (edited) How do you set this up for access to Unraid if you have SSH keys? (IE, remote access to Unraid..) I'm not understanding what key goes where in the config or if I need a passphrase? Can I find the needed config items in /boot/config/ssh ? Edited February 28, 2022 by dja Quote Link to comment
Casadream_1 Posted July 20, 2022 Share Posted July 20, 2022 I don't know if it's Guacamole that's wrong, it seems so! To begin with, it does not accept in the current state and without the current version, a connection without a key. If I put the rsa private key of the /config/ssh folder then it works once and then not at all. Quote Link to comment
theryno Posted December 9, 2022 Share Posted December 9, 2022 On 1/29/2021 at 5:24 PM, patm95 said: I got the RDP working. However, I was not able to connect with SSH to unraid. I can connect via Putty. Anyone else have an issue? @patm95 Same issue here....did you ever figure this out? Quote Link to comment
Kees Fluitman Posted December 18, 2022 Share Posted December 18, 2022 (edited) On 12/9/2022 at 4:09 AM, theryno said: @patm95 Same issue here....did you ever figure this out? I can't connect to the unraid IP either. Anyone any luck? Custom Network (for my nginx), can connect to all VMs in LAN, but not to unraid IP. Should I enable host access to docker networks? Edited December 18, 2022 by Kees Fluitman Quote Link to comment
darthjonathan12 Posted February 6 Share Posted February 6 On 8/14/2021 at 10:00 PM, zyurph said: I was able to resolve my issue by replacing the docker name on the upstream_app line in the subdomain.conf file to the ip address of the unraid server. This also fixed nextcloud as well. I am getting 502 bad gateway errors as well and I have done this already. The only solution I have found is to disable "Host access to custom networks" and then renable it. The issue happens later on again though. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.