domrockt Posted November 4, 2021 Share Posted November 4, 2021 (edited) So i have an Asrock X300 with an 5700g in it. i have a Win 10 VM seabios + the posted GPU Bios Unraid in Bios Mode I can instal the AMD APU driver for my 5700g i stubbed the Cezane IGPU but i got the error 43 inside the VM and i think thats the culprit for not utelizing the HDMI Port. can some one ,who got it working, post the used system? or an newer VBIOS? Edited November 4, 2021 by domrockt Quote Link to comment
Neomaltine Posted November 8, 2021 Share Posted November 8, 2021 (edited) Hi everyone, there is now a way to use hardware transcoding with AMD igpu using docker only for Plex. You can have a look on this thread: https://forums.plex.tv/t/got-hw-transcoding-to-work-with-libva-vaapi-on-ryzen-apu-ryzen-7-4700u/676546/131 It works fine for me on a 5700U. Edited November 8, 2021 by Neomaltine 2 Quote Link to comment
Econaut Posted November 8, 2021 Share Posted November 8, 2021 Neat - how long until that gets into Plex official docker I wonder... Quote Link to comment
domrockt Posted November 17, 2021 Share Posted November 17, 2021 Ok, i beated the Code 43 in Windows 10 with adding a Vendor ID and Hide the VM from the driver. But the IGPU is still not used. <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='2D76A8B352F1'/> </hyperv> <kvm> <hidden state='on'/> </kvm> <ioapic driver='kvm'/> </features> Quote Link to comment
tola5 Posted November 17, 2021 Share Posted November 17, 2021 I got it going with GPU acceleration. I had to install the AMD APU driver from https://www.amd.com/en/support/apu/amd-ryzen-processors/amd-ryzen-9-mobile-processors-radeon-graphics/amd-ryzen-9-5900hx and select the "factory reset" option so that it would uninstall all previously installed display drivers. Now I have GPU acceleration working!!!! Gaming and 4K 60fps video playback is PERFECT! I'm so happy.You have try this ?Sendt fra min SM-G998B med Tapatalk Quote Link to comment
domrockt Posted November 17, 2021 Share Posted November 17, 2021 (edited) kinda, i ofcourse use the driver for my 5700G. But i could try the 5900hx ones. When i add the multifunction='on' i have the code 12 not enough resources error code. So i used the driver for the 5900HX but neveless it wont use the IGPU. now i dont have any error codes and the driver states that everything is fine but no 3D application finds the IGPU i tryed 3D Mark and Parsec so far am Downloading an older 3D game like Aquanox for testing Purpose now. i should say i try this on a Asrock x300 sff PC my next steps are installing a few VMs with diffrent xml settings ... so it does not make any diffrence in behaviour with Seabios or OMVM, i start to believe that my asrock x300 does not manage the IGPU an not having any alernative very well. Edited November 17, 2021 by domrockt Quote Link to comment
Yellow NL Posted December 9, 2021 Share Posted December 9, 2021 Anyone got the Ryzen 7 5700G working allready? am trying to get it passed through a VM without succes still. Quote Link to comment
tola5 Posted December 9, 2021 Share Posted December 9, 2021 Anyone got the Ryzen 7 5700G working allready? am trying to get it passed through a VM without succes still. Yes it work use the vbios I posted and seabios for machine Sendt fra min SM-G998B med Tapatalk Quote Link to comment
snowy00 Posted December 11, 2021 Share Posted December 11, 2021 Hello together, I tried that with my AMD Ryzen 3 2200G and the bios which was shared in the former posts. After starting the VM the system getting unrespond and the only way was to hard reboot the system to getting the system in normal operation. I used the same configuratin for the VM as shown in the picture on second page. Do I need to bind it to VFIO? Or do I need an other vbios for the Graphics ROM BIOS? Quote Link to comment
tola5 Posted December 11, 2021 Share Posted December 11, 2021 Hello together, I tried that with my AMD Ryzen 3 2200G and the bios which was shared in the former posts. After starting the VM the system getting unrespond and the only way was to hard reboot the system to getting the system in normal operation. I used the same configuratin for the VM as shown in the picture on second page. Do I need to bind it to VFIO? Or do I need an other vbios for the Graphics ROM BIOS?Yes that vbios are for 5700G you need too get that for 2200g you can boot a Windows up out unraid and install gpuz and grab the vbios Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Asian23 Posted December 11, 2021 Share Posted December 11, 2021 (edited) I tried the 5700g bios posted here, and have a 5700G installed, but the windows 11 vm hard locks the unraid server - is there anything im doing wrong? Does the vega graphics need binding? Using 6.1.0 rc2. Edited December 11, 2021 by Asian23 Quote Link to comment
Asian23 Posted December 17, 2021 Share Posted December 17, 2021 Does anyone have a better guide to get the 5700G passthrough working? What should we be looking out for? Quote Link to comment
tola5 Posted December 17, 2021 Share Posted December 17, 2021 I tried the 5700g bios posted here, and have a 5700G installed, but the windows 11 vm hard locks the unraid server - is there anything im doing wrong? Does the vega graphics need binding? Using 6.1.0 rc2.And you use seabios ? But have not try windows 11 I runing windows 10 Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Asian23 Posted December 18, 2021 Share Posted December 18, 2021 Yes tried seabios On 12/17/2021 at 11:11 PM, tola5 said: And you use seabios ? But have not try windows 11 I runing windows 10 Sendt fra min SM-G998B med Tapatalk Yes tried seabios and Windows 10, problem is once I add the cezanne gpu the VM doesn't boot, it's fine with VNC. Quote Link to comment
tola5 Posted December 18, 2021 Share Posted December 18, 2021 14 minutes ago, Asian23 said: Yes tried seabios Yes tried seabios and Windows 10, problem is once I add the cezanne gpu the VM doesn't boot, it's fine with VNC. here are my vm settings and my flash if you can see any different 1 Quote Link to comment
Yellow NL Posted December 20, 2021 Share Posted December 20, 2021 Wondering what i am doing wrong because i have everything the same but i have no picture over HDMI. I have no immage over teamviewer either. added the video=efifb:off am on seabios on VNC the VM works perfect. anything i am missing? Quote Link to comment
tola5 Posted December 20, 2021 Share Posted December 20, 2021 Wondering what i am doing wrong because i have everything the same but i have no picture over HDMI. I have no immage over teamviewer either. added the video=efifb:off am on seabios on VNC the VM works perfect. anything i am missing?You say HDMI do you also passthrough the hdmi audio also ?Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Yellow NL Posted December 20, 2021 Share Posted December 20, 2021 Yes i did. The same as you did the AMD Family 17H Quote Link to comment
tola5 Posted December 20, 2021 Share Posted December 20, 2021 Yes i did. The same as you did the AMD Family 17H It not that one. That one is your audio on the motherboard . There should be two you can use both just add two audio devices. The name on my system are AMD Devices (07:00:1) where my gpu grupe so are (07:00:0)Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Yellow NL Posted December 20, 2021 Share Posted December 20, 2021 also tried that one.. Also tried binding them through Vfio.. no luck. Quote Link to comment
tola5 Posted December 20, 2021 Share Posted December 20, 2021 also tried that one.. Also tried binding them through Vfio.. no luck.Hmm and you don't have a display port you can try on ? Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Yellow NL Posted December 20, 2021 Share Posted December 20, 2021 ?I have the displayport only not the monitor. but still if the displayport works i should be able to Teamviewer in right? But also in teamviewer i got no signal. as if it doesnt boot with the igpu passed through Quote Link to comment
tola5 Posted December 20, 2021 Share Posted December 20, 2021 ?I have the displayport only not the monitor. but still if the displayport works i should be able to Teamviewer in right? But also in teamviewer i got no signal. as if it doesnt boot with the igpu passed throughWhat port do you use now from computer too the monitor . And yes will say that Sendt fra min SM-G998B med Tapatalk Quote Link to comment
Yellow NL Posted December 20, 2021 Share Posted December 20, 2021 I am using Hdmi, could use DVI but atm i am using HDMI. and honestly i am using mostly headless with hdmi dummy plugs and parsec. Quote Link to comment
Asian23 Posted December 20, 2021 Share Posted December 20, 2021 I'm wondering if this has something to do with the motherboards we're using. I was using a B550 board which the default iommu groups were bad, I'm switching to a x570 board in a couple of days and I'll report back. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.