smithrmark Posted August 20, 2021 Share Posted August 20, 2021 hello it would seem that after a short power out with the UPS kicking in I get a flash device error. i scanned it with windows and no errors are on the disk not sure what wrong. do i have a Fatal flash drive error when i open app page on the server. please help. Quote Link to comment
itimpi Posted August 20, 2021 Share Posted August 20, 2021 Not quite sure what you have done? Are you saying you can no longer boot from the flash drive? What you said implies you might have removed the flash drive while UnRaid was running? You cannot do this without upsetting UnRaid - the flash drive must be plugged in all the time Unraid is running. Quote Link to comment
Squid Posted August 20, 2021 Share Posted August 20, 2021 Unless the USB port you're plugged into lost power (highly unlikely) during the power cut, it wasn't related. You probably only noticed it when going to the Apps tab. Use a different port, ideally USB2. And as itimpi stated, you cannot pull the flash drive out without first shutting down the server Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 no i had a power outage and ups kicked in and no flash drive is not recognized seems like my usb is failed? what would you recommend to get my back up and running Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 Just now, smithrmark said: no i had a power outage and ups kicked in and no flash drive is not recognized seems like my usb is failed? what would you recommend to get my back up and running USB is not even recognized on my main comp Quote Link to comment
itimpi Posted August 20, 2021 Share Posted August 20, 2021 Do you have a backup of the flash drive? Can you see it’s contents when plugged into Windows? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 2 minutes ago, smithrmark said: USB is not even recognized on my main comp Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 2 minutes ago, itimpi said: Do you have a backup of the flash drive? Can you see it’s contents when plugged into Windows? i followed space invaders on YouTube to create a back up how do i put it on a new usb? Quote Link to comment
JonathanM Posted August 20, 2021 Share Posted August 20, 2021 1 minute ago, smithrmark said: i followed space invaders on YouTube to create a back up How long ago was this? Have you made any hardware changes since the backup was made? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 Just now, JonathanM said: How long ago was this? Have you made any hardware changes since the backup was made? no i have not everything is the same except apps and settings Quote Link to comment
JonathanM Posted August 20, 2021 Share Posted August 20, 2021 Prepare a new flash drive as usual, then copy the config folder from your backup to the new drive overwriting all. Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 Just now, JonathanM said: Prepare a new flash drive as usual, then copy the config folder from your backup to the new drive overwriting all. do u recommend a particular flash drive? the one that failed was a Kingston g3 Quote Link to comment
JonathanM Posted August 20, 2021 Share Posted August 20, 2021 I personally like the SE9 USB 2.0 version, but they are getting harder to find. https://amzn.com/dp/B01MRIEOHR/ Quote Link to comment
JorgeB Posted August 20, 2021 Share Posted August 20, 2021 Kingston DTSE9H (not the DTSE9G2), avoid any USB 3.0 flash drive, they can fail much more. Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 5 minutes ago, JonathanM said: Prepare a new flash drive as usual, then copy the config folder from your backup to the new drive overwriting all. damn i cant get to my back up! i can see it on my server under my shares and i cant transfer it over to my windows comp. any ideas? Quote Link to comment
JonathanM Posted August 20, 2021 Share Posted August 20, 2021 4 minutes ago, smithrmark said: i cant transfer it over to my windows comp Why not? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 7 minutes ago, JonathanM said: Why not? looks like i didnt make my back up folder a share. and now i cant access it to put it on my windows box. is there another way to do things ? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 cant see my tower in my network tree Quote Link to comment
JonathanM Posted August 20, 2021 Share Posted August 20, 2021 Do you have a current list of the drive serial numbers and which slots they were assigned to? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 12 minutes ago, JonathanM said: Do you have a current list of the drive serial numbers and which slots they were assigned to? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 is there a way to remote into my box and pull the usb backup off of it? Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 1 minute ago, smithrmark said: is there a way to remote into my box and pull the usb backup off of it? i just SSH into my server Quote Link to comment
smithrmark Posted August 20, 2021 Author Share Posted August 20, 2021 The registered GUID does not match the USB Flash boot device GUID Quote Link to comment
trurl Posted August 20, 2021 Share Posted August 20, 2021 Your license only works with the original flash drive it was registered to. You have to transfer the license. 3 hours ago, smithrmark said: The registered GUID does not match the USB Flash boot device GUID Post a screenshot Quote Link to comment
smithrmark Posted August 21, 2021 Author Share Posted August 21, 2021 16 hours ago, trurl said: Your license only works with the original flash drive it was registered to. You have to transfer the license. Post a screenshot i have just asked for a key because my GUID was not the same which is logical o well got fed up with it. now i have a problem that my dockers are not all working i stopped the ones that do not work. i cant edit them or lunch the WEBUI Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.