Goobaroo Posted June 7, 2022 Author Share Posted June 7, 2022 @Garden Looks like they shipped a bad port config in their server.properties file. You can edit the servers.properties file and change the port value from `server-port=25569` to `server-port=25565` That should fix it. The error you found can be ignored, I get that too. Quote Link to comment
Goobaroo Posted June 7, 2022 Author Share Posted June 7, 2022 You can also switch to the "Advanced" view (top right corner of the docker tab in Unraid) and force an update. I've put in a patch to make sure the server is running on 25565. The container is expecting that port either way, so it always needs to be set to that port number. Quote Link to comment
Garden Posted June 8, 2022 Share Posted June 8, 2022 I'm 99% sure I have all the ports set up correctly, i'm not sure what else the issue is. I allocated more ram and tried extending the login timer. The client is stuck at encrypting and the server logs says i'm connecting and then disconnected - took too long. Thanks for the help by the way, I don't have any experience with modded servers and barely any vanilla Quote Link to comment
FelipeBradley Posted June 8, 2022 Share Posted June 8, 2022 (edited) I fixed it but it took a while, it seems like I'm not very good at this. a friend recommended me and followed the instructions here: https://techgara.com/minecraft-2/ Edited June 9, 2022 by FelipeBradley Quote Link to comment
Goobaroo Posted June 8, 2022 Author Share Posted June 8, 2022 @Garden I pushed an update that should fix it if you follow these steps. 21 hours ago, Goobaroo said: You can also switch to the "Advanced" view (top right corner of the docker tab in Unraid) and force an update. I've put in a patch to make sure the server is running on 25565. The container is expecting that port either way, so it always needs to be set to that port number. Quote Link to comment
Goobaroo Posted June 8, 2022 Author Share Posted June 8, 2022 16 hours ago, FelipeBradley said: I fixed it but it took a while, it seems like I'm not very good at this. I'm not sure I follow what you were fixing? Quote Link to comment
Siggz Posted June 9, 2022 Share Posted June 9, 2022 Hi Goobaroo, The DW20 pack is working great! I was just wondering if you could do the FTB Plexiglass Mountain pack, as I wanted to show minecraft modding to new players but, the DW20 pack is a bit too hard. V/R Siggz Quote Link to comment
Goobaroo Posted June 9, 2022 Author Share Posted June 9, 2022 1 hour ago, Siggz said: I was just wondering if you could do the FTB Plexiglass Mountain pack Done. Quote Link to comment
Siggz Posted June 9, 2022 Share Posted June 9, 2022 @Goobaroo The plexiglass one seems to be having permission issues, even after giving the folder 755 permissions. V/R Siggz Quote Link to comment
Goobaroo Posted June 9, 2022 Author Share Posted June 9, 2022 Can you provide some logs, I'll see if I can help out. I found it took a while to start up for me and to get fully running. Quote Link to comment
Siggz Posted June 9, 2022 Share Posted June 9, 2022 16 minutes ago, Goobaroo said: Can you provide some logs, I'll see if I can help out. I found it took a while to start up for me and to get fully running. Sorry about that, I've attached a screenshot from my phone of the logs. Don't currently have access to anything else to grab the logs at the moment. Quote Link to comment
Goobaroo Posted June 9, 2022 Author Share Posted June 9, 2022 Yep, it's the permissions on the directory that is mapped to /data inside the container. You can try giving `/mnt/user/appdata/plexiglassmountain` 777 and it should be able to install. I'm not sure why some users have permission issues and others don't. I'm going to look into that. Quote Link to comment
ItsNotNick Posted June 12, 2022 Share Posted June 12, 2022 If it's not too much to ask could I recommend/request Pixelmon? I use your SF3 server a few times a week and it's given me the least grief by far. Quote Link to comment
Maxi531 Posted June 13, 2022 Share Posted June 13, 2022 Could you add FTB Infinity Evolved for 1.7.10? I am going through the process of adding it myself and I am completely lost Quote Link to comment
Goobaroo Posted June 14, 2022 Author Share Posted June 14, 2022 @ItsNotNick I can't verify Pixelmon 9.0.2 because I can't get it to launch on my M1 Mac. But if you want to give it a try, it should work. If not, I'll pull it down. FYI: @ptchernegovski @Maxi531 FTB Infinity Evolved 1.7 should be there now, enjoy. 1 Quote Link to comment
Maxi531 Posted June 14, 2022 Share Posted June 14, 2022 @Goobaroothank you very much, already installed, works a treat! 1 Quote Link to comment
ptchernegovski Posted June 14, 2022 Share Posted June 14, 2022 7 hours ago, Goobaroo said: @ItsNotNick I can't verify Pixelmon 9.0.2 because I can't get it to launch on my M1 Mac. But if you want to give it a try, it should work. If not, I'll pull it down. FYI: @ptchernegovski @Maxi531 FTB Infinity Evolved 1.7 should be there now, enjoy. Thank you so much! Installing it now. You are awesome! 1 Quote Link to comment
racingsquirrel Posted June 15, 2022 Share Posted June 15, 2022 Hi, Could you add the pack version to the first post for ftb_presents_direwolf20_1_18 please. It is currently stated as 1.18 which is the MC version not the pack version. Also if it has not been could you update to the latest version which I believe is 1.4.1. I see you made some updates for bugfixes and I'm not sure if you updated the pack at the same time. Thanks. Quote Link to comment
Goobaroo Posted June 15, 2022 Author Share Posted June 15, 2022 @racingsquirrel The pack versions are available on Docker Hub. But DireWolf 20 1.8 is the latest 1.4.1, put up about a week ago. The first post lags behind a bit as the rest of the server version updates is for the most part automated. Quote Link to comment
racingsquirrel Posted June 15, 2022 Share Posted June 15, 2022 Thanks @goobaroo. I'll check Docker Hub in future. Also thanks for these containers, I was previously using MineOS which is great but I looked for a different solution after an issue that I was having there. I'm enjoying the simplicity of this single app docker. 1 Quote Link to comment
djmulder Posted June 15, 2022 Share Posted June 15, 2022 Hey there, love your work a lot, saves me a lot of effort getting a server going I just have a feature request... can you add a console to the server? Like perhaps an rcon client like https://github.com/Rauks/Minecraft-RCON ? Would be so much easier to manage minor stuff. Like I like adding a whitelist. 1 Quote Link to comment
Goobaroo Posted June 16, 2022 Author Share Posted June 16, 2022 I've been managing any console commands by putting myself in the OPS list and that allows me to run any server commands. That should work for any of the existing containers. I'll see about adding the whitelist to the server config though, just like the Ops list. It should be pretty straight forward. For the RCON, I'll see if I can add config management for it. Enable/Disable and setting a password, & port. Quote Link to comment
ItsNotNick Posted June 16, 2022 Share Posted June 16, 2022 On 6/14/2022 at 5:00 AM, Goobaroo said: @ItsNotNick I can't verify Pixelmon 9.0.2 because I can't get it to launch on my M1 Mac. But if you want to give it a try, it should work. If not, I'll pull it down. Thank you so much! It does indeed work correctly, but I have to use the beta in the Curseforge app, I don't know if there's an easy way to use a different version, since it says the version is not available on the docker page. But it works, which is great, so thanks again. Quote Link to comment
WarMachine Posted June 16, 2022 Share Posted June 16, 2022 @GoobarooWhen are we going to see an RLCraft docker container? I would like that very much! Quote Link to comment
mfreeman451 Posted June 18, 2022 Share Posted June 18, 2022 I'm also having permissions issues after the latest Unraid upgrade of 6.10.3 and latest docker image, the container is unable to start. ``` + cd /data + [[ true = \f\a\l\s\e ]] + echo eula=true + [[ -f Server-Files-0.4.13.zip ]] + [[ -n -Xms8192m -Xmx16384m ]] + sed -i '/-Xm[s,x]/d' user_jvm_args.txt + for j in ${JVM_OPTS} + sed -i '$a\-Xms8192m' user_jvm_args.txt + for j in ${JVM_OPTS} + sed -i '$a\-Xmx16384m' user_jvm_args.txt + [[ -n '' ]] + [[ -n '' ]] + [[ -n '' ]] + sed -i 's/server-port.*/server-port=25565/g' server.properties + chmod 755 run.sh chmod: changing permissions of 'run.sh': Operation not permitted + ./run.sh Exception in thread "main" java.io.UncheckedIOException: java.util.zip.ZipException: zip END header not found at [email protected]/cpw.mods.niofs.union.UnionFileSystem.openFileSystem(UnionFileSystem.java:59) at java.base/java.util.stream.ReferencePipeline$3$1.accept(ReferencePipeline.java:197) at java.base/java.util.stream.ReferencePipeline$2$1.accept(ReferencePipeline.java:179) at java.base/java.util.AbstractList$RandomAccessSpliterator.forEachRemaining(AbstractList.java:720) ``` Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.