Start by clicking the manual update button. That does because you have disabled the check for update on page load. After you couch that it may have a new blue button. If you see that, click it and let me know if you see that.

If that doesn't help, you can try removing the other plugins and rebooting and see if they were conflicting. If no change put them back on again.

Current plugin requests:

- Beets

- NzbGet

- AirvideoHD

 

The first two are available as v5 and v6 plugins here: http://lime-technology.com/forum/index.php?topic=39169.0

 

I'm working on Airvideo HD. I have it running on unRAID v6 as bare-bones install. Currently trying to reduce the number of dependencies by rebuilding VLC without some of the unnecessary components / plugins.

 

 

PhAzE,

 

things look bleak here. The server seems to be starting ("...start ok" flashes at the bottom of the screen), but it's not connecting  to the server. The browser just times out. On occasion (3 out of fifty attempts?), the status bar indicates "Running", but when I click to open the browser gui, it again, times out. The status bar reverts back to "Stoped", and I'm back to where I started.

 

Start by clicking the manual update button. That does because you have disabled the check for update on page load. After you couch that it may have a new blue button.

 

I'm not quite sure what info you want here, but the button has remained the same in all aspects.

 

I'm about ready to downgrade to the last stable version, although when I inquired about this on the emby forums, I got the impression is was no longer available. So, I don't know. Do you have any more ideas before I give up on this?

Can you tell me what the plugin version is? It should show on the plugin settings page.

PhAzE

 

Just wondering if you had any plans to make a plugin for sickrage?

You can use the sickbeard plugin, and change the repo in the settings.

Worked great. thanks

Can you tell me what the plugin version is? It should show on the plugin settings page.

 

Here ya go:  Plugin Version: 2015.04.06.1

 

Currently, the status bar is showing "Running."  Just happened, but still no connection

OK that's the latest one. Can you take a screenshot of the emby plugin settings page?

Can you take a screenshot of the emby plugin settings page?

Try this:

 

Change beta to "no"

 

Turn check for updates on page load to "yes"

 

Change the port to 9999

 

And change the install directory to /mnt/cache/Embyserver

 

Then hit apply and see if it works. That will reinstall the app since you are changing the install directory and often changing the port will help as I've seen before where some apps will crash worth no error loud when the port can't be bound to the IP.

If it goes to running, wait 1 full minute before clicking on the "running" text as sometimes on first start emby can take a bit to initialize.

Do I need to change the name of the actual install directory.

 

ie.  /mnt/cache/Mediabrowser/mediabrowser  to /mnt/cache/embyserver/embyserver ?

Doesn't need to be changed as long as it isn't the same as it currently is

Doesn't need to be changed as long as it isn't the same as it currently is

 

Pardon me for being so dense, but are you saying install in a new directory called  Embyserver or change the name of the current . I think you might be on to something and I don't want to screw it up.lol

 

Thanks

Change the name to anything other than /mbserver/mbserver

 

No worries, is over a forum so it can be a pain to troubleshoot stuff sometimes

I am looking at your Serviio plugin .  I have a couple of questions

 

the way you have the plugin downloads set up - does it get the latest versions of applicable files - like the latest version of serviio itself .

 

can you arrange it to install on a cache drive and whre would changes need to be made to achieve that ?

 

thanks for your time 

Yes it gets the latest version, in the plugin settings page you can set the config directory.

 

No web GUI is included so you'll need to connect/configure or from a remote PC using the windows serviio remote connect.  Unfortunately the GUI was no longer maintained and the alternate GUI requires full blown apache and a bunch of configurations to work.

PhAzE,

 

Success! Ypur last set of suggestions did the trick and I am sending another donation your way. Thank you very much.

 

Do you think the problem  was just the port number, or conflicting data in an prior install folder?

 

There was one surprise for me, however. I expected the install to occur in the same, renamed installation folders. My surprise was that a new set of directories were created having the same names as the originals, (ie. /mnt/cache/mediabrowser)

 

This creates a problem in that all of my metadata is stored in the original install directories The question now is how to get the metadata into the newly created install directories. A copy paste action comes to mind, but some of the sub folders appear to contain data unique to a particular install which would suggest a selective transfer of folders.

Any ideas on this?

 

Thanks

Yes it gets the latest version, in the plugin settings page you can set the config directory.

 

No web GUI is included so you'll need to connect/configure or from a remote PC using the windows serviio remote connect.  Unfortunately the GUI was no longer maintained and the alternate GUI requires full blown apache and a bunch of configurations to work.

So the plug in cannot be configured say 192.168.1.253:8096

You have to use serviio remote connect?

 

PhAzE,

 

Success! Ypur last set of suggestions did the trick and I am sending another donation your way. Thank you very much.

 

Do you think the problem  was just the port number, or conflicting data in an prior install folder?

 

There was one surprise for me, however. I expected the install to occur in the same, renamed installation folders. My surprise was that a new set of directories were created having the same names as the originals, (ie. /mnt/cache/mediabrowser)

 

This creates a problem in that all of my metadata is stored in the original install directories The question now is how to get the metadata into the newly created install directories. A copy paste action comes to mind, but some of the sub folders appear to contain data unique to a particular install which would suggest a selective transfer of folders.

Any ideas on this?

 

Thanks

You mean because you want to rename the config folder so it is similar to the install directory folder?

 

It was likely the port but I guess we will never know 100% for sure.

Yes it gets the latest version, in the plugin settings page you can set the config directory.

 

No web GUI is included so you'll need to connect/configure or from a remote PC using the windows serviio remote connect.  Unfortunately the GUI was no longer maintained and the alternate GUI requires full blown apache and a bunch of configurations to work.

So the plug in cannot be configured say 192.168.1.253:8096

You have to use serviio remote connect?

That's correct because the 3rd party web interface is no longer updated by the developer. There is an alternative web interface but it requires apache which is a bit cumbersome to setup with a plugin.

Any chance of getting a PlexWatch plugin? I was looking into installing it with docker, but that doesn't actually work unless you are running Plex in a docker as well apparently. I have everything set up in Unraid6 with your plugin, so I want to avoid swapping Plex to a docker, but Plexwatch is making that tempting.

 

https://github.com/ljunkie/plexWatch

Yes it gets the latest version, in the plugin settings page you can set the config directory.

 

No web GUI is included so you'll need to connect/configure or from a remote PC using the windows serviio remote connect.  Unfortunately the GUI was no longer maintained and the alternate GUI requires full blown apache and a bunch of configurations to work.

So the plug in cannot be configured say 192.168.1.253:8096

You have to use serviio remote connect?

That's correct because the 3rd party web interface is no longer updated by the developer. There is an alternative web interface but it requires apache which is a bit cumbersome to setup with a plugin.

 

ok tried using remote connect - for library I assume I use path rather than local to add folder to the library .

also when I tick library to change location ( using /mnt/cache/apps/serviio/library ) click cdone - when the screen returns the tick has been taken out of the library box. is it using the location specified ? or reverting to default?