June 17, 20179 yr Author I would not use the flash drive. I would seriously consider using cache drive, that is pretty much where everyone put everything, even an old 80gb dirve will do.Sent from my ONEPLUS A3000 using Tapatalk
June 17, 20179 yr Author Use drive one for now if you have to, but please consider a cacheSent from my ONEPLUS A3000 using Tapatalk
June 17, 20179 yr Hmm, no more room on the MB or case for a drive. I'll have to look into combining 2 drives if I can find an 8TB for a good price.
June 17, 20179 yr Hi, Is the Hardware-Transcoding via VAAPI working? I tried to activate it and got the error message: [AVHWDeviceContext @ 0x3b8d3e0] No VA display found for device: /dev/dri/card0. [vaapi @ 0x312f1e0] Failed to create a VAAPI device Br, Johannes Edited June 17, 20179 yr by ebnerjoh
June 17, 20179 yr 3 hours ago, ebnerjoh said: Hi, Is the Hardware-Transcoding via VAAPI working? I tried to activate it and got the error message: [AVHWDeviceContext @ 0x3b8d3e0] No VA display found for device: /dev/dri/card0. [vaapi @ 0x312f1e0] Failed to create a VAAPI device Br, Johannes Does that device exist in unraid? Did you pass it through to the docker? I'm genuinely asking, I don't know if it will work or not.
June 17, 20179 yr Author At this moment not, I'm currently working on it. I hope to have it done by this summer.Sent from my ONEPLUS A3000 using Tapatalk
June 18, 20179 yr 7 hours ago, hurricanehrndz said: At this moment not, I'm currently working on it. I hope to have it done by this summer. Sent from my ONEPLUS A3000 using Tapatalk Thanks for the answer. Br, Johannes
June 20, 20179 yr +1 for the VAAPI support. Any more info what is the specific problem with that? When i recall it right, the Plex Docker can already do hardware transcoding. Correct me if i am wrong.
June 20, 20179 yr Author Plex has also had their own implementation of ffmpeg for a long time this is something new for us. For now you can probably do some manual workarounds, such as map the device, set the permissions and install ffmpeg from packman.Sent from my ONEPLUS A3000 using Tapatalk
June 20, 20179 yr Author Hi, Is the Hardware-Transcoding via VAAPI working? I tried to activate it and got the error message:[AVHWDeviceContext @ 0x3b8d3e0] No VA display found for device: /dev/dri/card0.[vaapi @ 0x312f1e0] Failed to create a VAAPI device Br, JohannesIt's to be released some time in the summerSent from my ONEPLUS A3000 using Tapatalk
July 3, 20179 yr When will the docker update to Version 3.2.22.0, there is a bug fix in it that im after.
July 3, 20179 yr 2 hours ago, reggierat said: When will the docker update to Version 3.2.22.0, there is a bug fix in it that im after. Whenever you update it as described earlier in this thread. It's up to you.
July 4, 20179 yr Author We hope to have an update within the next 3 days. Sorry for the delay.Sent from my ONEPLUS A3000 using Tapatalk
July 4, 20179 yr 3 hours ago, hurricanehrndz said: We hope to have an update within the next 3 days. Sorry for the delay. Sent from my ONEPLUS A3000 using Tapatalk Awesome! thanks for the reply Edited July 4, 20179 yr by reggierat
September 22, 20178 yr Amy chance this would be updated soon. There is a fix for guide data on live tv I am waiting for Thanks, Scott
September 22, 20178 yr Author 29 minutes ago, scottw said: Amy chance this would be updated soon. There is a fix for guide data on live tv I am waiting for Thanks, Scott It was updated 5 hrs ago: https://hub.docker.com/r/emby/embyserver/tags/ At the same time the update was published on github: https://github.com/MediaBrowser/Emby/releases I'm not sure how much faster you want it.
September 22, 20178 yr Sorry, I wasn't trying to be a jerk ? I normally update from the Docker page when it shows there is an update available. Sorry, I am fairly new to Docker in general. Will it show there is an update there (it currently does not) or do I have to update it another way. I currently have 3.2.28 and inside emby it says 3.2.30 is avaialble but I'm pretty sure I'm not supposed to update through Emby directly. The Docker page show up to date. Thanks for being patient with me. Edited September 22, 20178 yr by scottw
September 22, 20178 yr Crap, I never hit the Check for Updates button. So sorry, I don't know why I didn't see that. It's updated now. Thanks for all your work on this and please give me a pass on this one ?
September 22, 20178 yr Author Crap, I never hit the Check for Updates button. So sorry, I don't know why I didn't see that. It's updated now. Thanks for all your work on this and please give me a pass on this one [emoji23]Just glad it is all working for you. Always check the docker hub when in doubt. Builds and updates should be available within the hour, it is all automatic, so if you don't see it please post here.[emoji1] Sent from my ONEPLUS A3000 using Tapatalk
September 23, 20178 yr On 21/06/2017 at 4:39 AM, hurricanehrndz said: It's to be released some time in the summer Sent from my ONEPLUS A3000 using Tapatalk Any news on this update for pass through?
September 23, 20178 yr Author We are currently working on this a lot. There is a lot of focus on this, thank you for your patience Sent from my ONEPLUS A3000 using Tapatalk
September 27, 20178 yr RESOLVED: https://emby.media/community/index.php?/topic/51301-cant-get-any-of-my-media-to-play/#entry492426 https://emby.media/community/index.php?/topic/45351-sync-with-reverse-proxy-not-working-correctly/?p=425907 Hello everyone, My Emby Docker would not play any videos and could not update, so I rebuilt the Docker Image File and reinstalled it. I am now on version 3.2.32.0, but I am still having problems playing any of my media (TV shows, Movies, and Audio Books) and Emby constantly logs me out. I went through the logs and it appears there is a "Native error= Access denied" showing up. I ran the tool in Unraid called "Docker Safe New Perms", but it did not solve the issue (I am assuming it is because it does not touch the appdata folder). I can see all of my media and can even modify the metadata, so I know it can access /mnt where my media is stored. I am not sure what to do from here. Attached is a copy of my log file. EDIT: I found a link to what appears to be the same issue occurring on a different platform, just not sure how to apply the fix to the Emby Docker running on Unraid. https://forum.openmediavault.org/index.php/Thread/10769-Emby-Can-t-play-anything-Error-starting-ffmpeg-Access-denied/?pageNo=2 Any help would be much appreciated. Thanks, Nick server-63642058137.txt Edited September 29, 20178 yr by Pranker99 Resolved
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.