[Support] binhex - rTorrentVPN - Page 17 - Docker Containers

December 29, 20169 yr

Author

Hi everyone, hope you all had a great Christmas.

Anyway, got rTorrentVPN working with "ivacy" VPN which uses VPN_PORT as 53.

My supervisord.log contains the following lines:-

2016-12-28 07:15:36.950867 [warn] VPN_INCOMING_PORT not defined (via -e VPN_INCOMING_PORT), downloads may be slow

and

Wed Dec 28 07:15:48 2016 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.

Both are warnings and things do seem to be working OK, do I need to do anything about them? What?

Cheers DC

So the warning about incoming port is mine, your VPN provider will need to support the ability to receive inbound traffic, if they don't allow this (and many don't) then speeds will be low. The other warning is generated from openvpn and is regards authentication method, if you are connected to the webui though it looks like you have authenticated successfully and thus can ignore this message.

Sent from my LG-V500 using Tapatalk

January 5, 20179 yr

Author

Oh, damn

My issue is that I use the rutorrent to be able to use the app "BarMagnet" on my iOS devices (the only I could find to control Torrents with iOS!). I had to install a certificate to be able to use it, but now I have it, I was able to use the rutorrent HTTPRPC to add my rtorrentVPN docker (using my WAN IP with a port fwd to port 9080 (port I used for the HTTP version).

I could use the rtorrent XMLRPC, but I really don't know how, any idea ?? What port I can connect from the Internet to the rtorrent XMLRPC.

dunno if your still interested but i have slackened the restriction, you can now get both web ui's running at the same time by setting the value for key ENABLE_FLOOD to "both".

January 13, 20179 yr

Hello,

I just installed rutorrent and am loving the speeds. I've set up the folders and its my understanding that none of the settings of the web gui will work? Is this still the case? Is thereby way to set up categories and have them complete to different folders? I also read that turning off auto move is wise, does this still apply? Im wondering if i have to choose between deluge (slow but steady) or this (fast but hands on and not automated).

Any help would be appreciated,

Thanks

January 13, 20179 yr

Hello,

I just installed rutorrent and am loving the speeds. I've set up the folders and its my understanding that none of the settings of the web gui will work? Is this still the case? Is thereby way to set up categories and have them complete to different folders? I also read that turning off auto move is wise, does this still apply? Im wondering if i have to choose between deluge (slow but steady) or this (fast but hands on and not automated).

Any help would be appreciated,

Thanks

You can set some things from the gui, but some things are defined in you config file, and will therefor be changed upon restart.

I am using automove, and it is working fine 99% of the time

January 13, 20179 yr

Author

Hello,

I just installed rutorrent and am loving the speeds. I've set up the folders and its my understanding that none of the settings of the web gui will work? Is this still the case? Is thereby way to set up categories and have them complete to different folders? I also read that turning off auto move is wise, does this still apply? Im wondering if i have to choose between deluge (slow but steady) or this (fast but hands on and not automated).

Any help would be appreciated,

Thanks

You can set some things from the gui, but some things are defined in you config file, and will therefor be changed upon restart.

I am using automove, and it is working fine 99% of the time

yeah youve nailed it there, deluge is slow and steady, rtorrent is fast and slightly unstable, but ive got more code in now to auto restart stuff, so its pretty good now, i personally made the switch over to rtorrent purely for the improved dl speeds.

so as ZataH correctly stated, the way rutorrent works is that it will allow you to modify settings for rtorrent and the change will take effect, but they wont save, but any setting for rutorrent itself will save, so configuration settings for any of the rutorrent plugins will save correctly. If you want to make changes to some core rtorrent settings then you will need to crank open a copy of notepad++ (or any good editor that supports correct line endings) and open the file /config/rtorrent/config/rtorrent.rc.

oh and just to confirm i have no issues with automove myself, works consistently for me.

January 13, 20179 yr

Thank you for the response. Ive opened and set the proper paths using MC in terminal. Everything works smoothly. Is there any way to setup categories so I don't have all types of media put into the completed file? If that isn't possible, how can I manually move the files to the correct folders and then point rutorrent to there for seeding?

January 13, 20179 yr

Thank you for the response. Ive opened and set the proper paths using MC in terminal. Everything works smoothly. Is there any way to setup categories so I don't have all types of media put into the completed file? If that isn't possible, how can I manually move the files to the correct folders and then point rutorrent to there for seeding?

Why not just copy the files?

January 13, 20179 yr

Copy as in leave them in a folder seeding and then copy to the proper folders? The reason I would prefer not to do this is space. 100-200gb files, having to be copied instead of moved will quickly eat up my storage space.

January 16, 20179 yr

Ive been using this for awhile now and suddenly the webui appears, but cannot connect to rtorrent, and the log has this repeating endlessly...any ideas? HELP!!

2017-01-16 08:22:21,510 DEBG 'start-script' stdout output:

[info] No PID file containing PID for sleep command present, assuming script hasn't started yet.

2017-01-16 08:22:31,514 DEBG 'start-script' stdout output:

[warn] OpenVPN process terminated, restarting OpenVPN...

January 16, 20179 yr

Author

Ive been using this for awhile now and suddenly the webui appears, but cannot connect to rtorrent, and the log has this repeating endlessly...any ideas? HELP!!

2017-01-16 08:22:21,510 DEBG 'start-script' stdout output:

[info] No PID file containing PID for sleep command present, assuming script hasn't started yet.

2017-01-16 08:22:31,514 DEBG 'start-script' stdout output:

[warn] OpenVPN process terminated, restarting OpenVPN...

So that is basically telling you the openvpn process is being terminated for some reason and it's auto restarting. Firstly try shutting down the docker container and then restarting, if it's still not starting up correctly then please post the entire supervisord.log file located in /config

Sent from my SM-G900F using Tapatalk

January 21, 20179 yr

Hi,

So, for the record, I've been using your rtorrent image in which I added the tracklabels plugin, for more than a month with around 900 torrents and 3 or 4 trackers. Things are stable, no issue so far.

Maybe you could think about giving it another try?

Cheers

January 25, 20179 yr

Ive been using this for awhile now and suddenly the webui appears, but cannot connect to rtorrent, and the log has this repeating endlessly...any ideas? HELP!!

2017-01-16 08:22:21,510 DEBG 'start-script' stdout output:

[info] No PID file containing PID for sleep command present, assuming script hasn't started yet.

2017-01-16 08:22:31,514 DEBG 'start-script' stdout output:

[warn] OpenVPN process terminated, restarting OpenVPN...

Could it be that your vpn credentials have expired?

Try to login manually from your pc using the OpenVPN config.

January 29, 20179 yr

Hi

Thanks for all the hard work I really like rutorrent. Has anyone got the chrome extension remote torrent adder to work with it? I always get an error saying no file could be found. Anyone got any ideas?

Thanks

February 1, 20179 yr

Created by...
___. .__ .__

\_ |__ |__| ____ | |__ ____ ___ ___

| __ \| |/ \| | \_/ __ \\ \/ /

| \_\ \ | | \ Y \ ___/ > <

|___ /__|___| /___| /\___ >__/\_ \

\/ \/ \/ \/ \/

https://hub.docker.com/u/binhex/

2017-02-01 12:13:05.024467 [info] Host is running unRAID

2017-02-01 12:13:05.074731 [info] System information Linux 7e8d84600867 4.4.30-unRAID #2 SMP PREEMPT Sat Nov 5 12:09:05 PDT 2016 x86_64 GNU/Linux

2017-02-01 12:13:05.118495 [info] PUID defined as '99'

2017-02-01 12:13:05.167117 [info] PGID defined as '100'

2017-02-01 12:13:05.229983 [info] Permissions already set for volume mappings

2017-02-01 12:13:05.279235 [info] VPN_ENABLED defined as 'yes'

2017-02-01 12:13:05.325826 [info] VPN_PROV defined as 'airvpn'

2017-02-01 12:13:05.371753 [info] VPN_REMOTE defined as 'ch.vpn.airdns.org'

2017-02-01 12:13:05.425274 [info] VPN_PORT defined as '1198'

2017-02-01 12:13:05.471264 [info] VPN_PROTOCOL defined as 'udp'

2017-02-01 12:13:05.522352 [info] LAN_NETWORK defined as '192.168.11.0/24'

2017-02-01 12:13:05.566274 [info] NAME_SERVERS defined as '8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177'

2017-02-01 12:13:05.610054 [info] VPN_INCOMING_PORT defined as '20568'

2017-02-01 12:13:05.654540 [info] VPN_DEVICE_TYPE defined as 'tun'

2017-02-01 12:13:05.711486 [info] STRONG_CERTS defined as 'no'

2017-02-01 12:13:05.772729 [info] ENABLE_PRIVOXY defined as 'no'

2017-02-01 12:13:05.814829 [info] ENABLE_FLOOD defined as 'no'

chsh: Shell not changed.

Changing shell for nobody.

2017-02-01 12:13:06,465 CRIT Set uid to user 0

2017-02-01 12:13:06,466 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing

2017-02-01 12:13:06,470 INFO supervisord started with pid 7

2017-02-01 12:13:07,473 INFO spawned: 'start-script' with pid 101

2017-02-01 12:13:07,475 INFO spawned: 'flood-script' with pid 102

2017-02-01 12:13:07,477 INFO spawned: 'rutorrent-script' with pid 103

2017-02-01 12:13:07,480 INFO spawned: 'checkproc-script' with pid 104

2017-02-01 12:13:07,482 INFO spawned: 'rtorrent-script' with pid 105

2017-02-01 12:13:07,488 INFO spawned: 'privoxy-script' with pid 106

2017-02-01 12:13:07,491 DEBG 'start-script' stdout output:

[info] VPN is enabled, beginning configuration of VPN

2017-02-01 12:13:07,491 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,493 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: rtorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,507 DEBG 'flood-script' stdout output:

[info] Flood not enabled, skipping starting Flood Web UI

2017-02-01 12:13:07,508 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47235103416048 for <Subprocess at 47235105550704 with name flood-script in state RUNNING> (stderr)>

2017-02-01 12:13:07,509 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47235103455712 for <Subprocess at 47235105550704 with name flood-script in state RUNNING> (stdout)>

2017-02-01 12:13:07,509 INFO exited: flood-script (exit status 0; expected)

2017-02-01 12:13:07,510 DEBG received SIGCLD indicating a child quit

2017-02-01 12:13:07,518 DEBG 'privoxy-script' stdout output:

[info] Privoxy set to disabled

2017-02-01 12:13:07,518 DEBG fd 32 closed, stopped monitoring <POutputDispatcher at 47235106062064 for <Subprocess at 47235106369120 with name privoxy-script in state RUNNING> (stdout)>

2017-02-01 12:13:07,519 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 47235106060336 for <Subprocess at 47235106369120 with name privoxy-script in state RUNNING> (stderr)>

2017-02-01 12:13:07,519 INFO exited: privoxy-script (exit status 0; expected)

2017-02-01 12:13:07,521 DEBG received SIGCLD indicating a child quit

2017-02-01 12:13:07,522 DEBG 'rtorrent-script' stdout output:

[info] rTorrent config file already exists, skipping copy

2017-02-01 12:13:07,528 DEBG 'rtorrent-script' stdout output:

[info] VPN is enabled, checking VPN tunnel local ip is valid

2017-02-01 12:13:07,535 DEBG 'start-script' stdout output:

[info] VPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Switzerland_UDP-443.ovpn

2017-02-01 12:13:07,587 DEBG 'start-script' stdout output:

[info] Default route for container is 172.17.0.1

2017-02-01 12:13:07,591 DEBG 'start-script' stdout output:

[info] Adding 8.8.8.8 to /etc/resolv.conf

2017-02-01 12:13:07,595 DEBG 'start-script' stdout output:

[info] Adding 37.235.1.174 to /etc/resolv.conf

2017-02-01 12:13:07,598 DEBG 'start-script' stdout output:

[info] Adding 8.8.4.4 to /etc/resolv.conf

2017-02-01 12:13:07,602 DEBG 'start-script' stdout output:

[info] Adding 37.235.1.177 to /etc/resolv.conf

2017-02-01 12:13:07,608 DEBG 'start-script' stdout output:

[info] Adding 192.168.11.0/24 as route via docker eth0

2017-02-01 12:13:07,609 DEBG 'start-script' stdout output:

[info] ip route defined as follows...

--------------------

2017-02-01 12:13:07,610 DEBG 'start-script' stdout output:

default via 172.17.0.1 dev eth0

172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.4

192.168.11.0/24 via 172.17.0.1 dev eth0

2017-02-01 12:13:07,611 DEBG 'start-script' stdout output:

--------------------

2017-02-01 12:13:07,616 DEBG 'start-script' stdout output:

[info] iptable_mangle support detected, adding fwmark for tables

2017-02-01 12:13:07,666 DEBG 'start-script' stdout output:

[info] iptables defined as follows...

--------------------

2017-02-01 12:13:07,667 DEBG 'start-script' stdout output:

-P INPUT DROP

-P FORWARD ACCEPT

-P OUTPUT DROP

-A INPUT -i tun0 -j ACCEPT

-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT

-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT

-A INPUT -s 192.168.11.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT

-A INPUT -p udp -m udp --sport 53 -j ACCEPT

-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A OUTPUT -o tun0 -j ACCEPT

-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT

-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT

-A OUTPUT -d 192.168.11.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT

-A OUTPUT -p udp -m udp --dport 53 -j ACCEPT

-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT

-A OUTPUT -o lo -j ACCEPT

2017-02-01 12:13:07,668 DEBG 'start-script' stdout output:

--------------------

[info] Starting OpenVPN...

2017-02-01 12:13:07,676 DEBG 'start-script' stdout output:

[info] OpenVPN started

I'm getting stuck here. Thoughts?

February 1, 20179 yr

Author

Created by...
___. .__ .__

\_ |__ |__| ____ | |__ ____ ___ ___

| __ \| |/ \| | \_/ __ \\ \/ /

| \_\ \ | | \ Y \ ___/ > <

|___ /__|___| /___| /\___ >__/\_ \

\/ \/ \/ \/ \/

https://hub.docker.com/u/binhex/

2017-02-01 12:13:05.024467 [info] Host is running unRAID

2017-02-01 12:13:05.074731 [info] System information Linux 7e8d84600867 4.4.30-unRAID #2 SMP PREEMPT Sat Nov 5 12:09:05 PDT 2016 x86_64 GNU/Linux

2017-02-01 12:13:05.118495 [info] PUID defined as '99'

2017-02-01 12:13:05.167117 [info] PGID defined as '100'

2017-02-01 12:13:05.229983 [info] Permissions already set for volume mappings

2017-02-01 12:13:05.279235 [info] VPN_ENABLED defined as 'yes'

2017-02-01 12:13:05.325826 [info] VPN_PROV defined as 'airvpn'

2017-02-01 12:13:05.371753 [info] VPN_REMOTE defined as 'ch.vpn.airdns.org'

2017-02-01 12:13:05.425274 [info] VPN_PORT defined as '1198'

2017-02-01 12:13:05.471264 [info] VPN_PROTOCOL defined as 'udp'

2017-02-01 12:13:05.522352 [info] LAN_NETWORK defined as '192.168.11.0/24'

2017-02-01 12:13:05.566274 [info] NAME_SERVERS defined as '8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177'

2017-02-01 12:13:05.610054 [info] VPN_INCOMING_PORT defined as '20568'

2017-02-01 12:13:05.654540 [info] VPN_DEVICE_TYPE defined as 'tun'

2017-02-01 12:13:05.711486 [info] STRONG_CERTS defined as 'no'

2017-02-01 12:13:05.772729 [info] ENABLE_PRIVOXY defined as 'no'

2017-02-01 12:13:05.814829 [info] ENABLE_FLOOD defined as 'no'

chsh: Shell not changed.

Changing shell for nobody.

2017-02-01 12:13:06,465 CRIT Set uid to user 0

2017-02-01 12:13:06,466 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing

2017-02-01 12:13:06,470 INFO supervisord started with pid 7

2017-02-01 12:13:07,473 INFO spawned: 'start-script' with pid 101

2017-02-01 12:13:07,475 INFO spawned: 'flood-script' with pid 102

2017-02-01 12:13:07,477 INFO spawned: 'rutorrent-script' with pid 103

2017-02-01 12:13:07,480 INFO spawned: 'checkproc-script' with pid 104

2017-02-01 12:13:07,482 INFO spawned: 'rtorrent-script' with pid 105

2017-02-01 12:13:07,488 INFO spawned: 'privoxy-script' with pid 106

2017-02-01 12:13:07,491 DEBG 'start-script' stdout output:

[info] VPN is enabled, beginning configuration of VPN

2017-02-01 12:13:07,491 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,493 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: rtorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,494 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)

2017-02-01 12:13:07,507 DEBG 'flood-script' stdout output:

[info] Flood not enabled, skipping starting Flood Web UI

2017-02-01 12:13:07,508 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47235103416048 for <Subprocess at 47235105550704 with name flood-script in state RUNNING> (stderr)>

2017-02-01 12:13:07,509 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47235103455712 for <Subprocess at 47235105550704 with name flood-script in state RUNNING> (stdout)>

2017-02-01 12:13:07,509 INFO exited: flood-script (exit status 0; expected)

2017-02-01 12:13:07,510 DEBG received SIGCLD indicating a child quit

2017-02-01 12:13:07,518 DEBG 'privoxy-script' stdout output:

[info] Privoxy set to disabled

2017-02-01 12:13:07,518 DEBG fd 32 closed, stopped monitoring <POutputDispatcher at 47235106062064 for <Subprocess at 47235106369120 with name privoxy-script in state RUNNING> (stdout)>

2017-02-01 12:13:07,519 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 47235106060336 for <Subprocess at 47235106369120 with name privoxy-script in state RUNNING> (stderr)>

2017-02-01 12:13:07,519 INFO exited: privoxy-script (exit status 0; expected)

2017-02-01 12:13:07,521 DEBG received SIGCLD indicating a child quit

2017-02-01 12:13:07,522 DEBG 'rtorrent-script' stdout output:

[info] rTorrent config file already exists, skipping copy

2017-02-01 12:13:07,528 DEBG 'rtorrent-script' stdout output:

[info] VPN is enabled, checking VPN tunnel local ip is valid

2017-02-01 12:13:07,535 DEBG 'start-script' stdout output:

[info] VPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Switzerland_UDP-443.ovpn

2017-02-01 12:13:07,587 DEBG 'start-script' stdout output:

[info] Default route for container is 172.17.0.1

2017-02-01 12:13:07,591 DEBG 'start-script' stdout output:

[info] Adding 8.8.8.8 to /etc/resolv.conf

2017-02-01 12:13:07,595 DEBG 'start-script' stdout output:

[info] Adding 37.235.1.174 to /etc/resolv.conf

2017-02-01 12:13:07,598 DEBG 'start-script' stdout output:

[info] Adding 8.8.4.4 to /etc/resolv.conf

2017-02-01 12:13:07,602 DEBG 'start-script' stdout output:

[info] Adding 37.235.1.177 to /etc/resolv.conf

2017-02-01 12:13:07,608 DEBG 'start-script' stdout output:

[info] Adding 192.168.11.0/24 as route via docker eth0

2017-02-01 12:13:07,609 DEBG 'start-script' stdout output:

[info] ip route defined as follows...

--------------------

2017-02-01 12:13:07,610 DEBG 'start-script' stdout output:

default via 172.17.0.1 dev eth0

172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.4

192.168.11.0/24 via 172.17.0.1 dev eth0

2017-02-01 12:13:07,611 DEBG 'start-script' stdout output:

--------------------

2017-02-01 12:13:07,616 DEBG 'start-script' stdout output:

[info] iptable_mangle support detected, adding fwmark for tables

2017-02-01 12:13:07,666 DEBG 'start-script' stdout output:

[info] iptables defined as follows...

--------------------

2017-02-01 12:13:07,667 DEBG 'start-script' stdout output:

-P INPUT DROP

-P FORWARD ACCEPT

-P OUTPUT DROP

-A INPUT -i tun0 -j ACCEPT

-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT

-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --dport 9080 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --sport 9080 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --dport 9443 -j ACCEPT

-A INPUT -i eth0 -p tcp -m tcp --sport 9443 -j ACCEPT

-A INPUT -s 192.168.11.0/24 -i eth0 -p tcp -m tcp --dport 5000 -j ACCEPT

-A INPUT -p udp -m udp --sport 53 -j ACCEPT

-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A OUTPUT -o tun0 -j ACCEPT

-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT

-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --dport 9080 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --sport 9080 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --dport 9443 -j ACCEPT

-A OUTPUT -o eth0 -p tcp -m tcp --sport 9443 -j ACCEPT

-A OUTPUT -d 192.168.11.0/24 -o eth0 -p tcp -m tcp --sport 5000 -j ACCEPT

-A OUTPUT -p udp -m udp --dport 53 -j ACCEPT

-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT

-A OUTPUT -o lo -j ACCEPT

2017-02-01 12:13:07,668 DEBG 'start-script' stdout output:

--------------------

[info] Starting OpenVPN...

2017-02-01 12:13:07,676 DEBG 'start-script' stdout output:

[info] OpenVPN started

I'm getting stuck here. Thoughts?

you sure about that port number?

2017-02-01 12:13:05.425274 [info] VPN_PORT defined as '1198'

looking at the name of your ovpn file i would guess your port is 443 no?:-

[info] VPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Switzerland_UDP-443.ovpn

open up the ovpn file and take a look at the port, its the number defined at the end of the "remote" line, if its not 1198 then change it and try again.

February 1, 20179 yr

D'oh. Thank you!

February 4, 20179 yr

Found out a weird setting done by some of your process.

I've been using it for 3 days and I was wondering why there was almost no upload going on even with all the proper settings.

The issue was in the reported IP to tracker.

The IP reported is the internal ip of the VPN connection and not the real ip that the outside see.

The TUN0 adress is 10.4.55.159.

I can see it's also what the log show:

2017-02-04 19:57:37,316 DEBG 'rtorrent-script' stdout output:

[info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.4.55.159 different, marking for reconfigure

[info] Attempting to start rTorrent...

[info] Removing any rtorrent session lock files left over from the previous run...

But nobody will ever be able to acces that adress, except maybe people on the same VPN server.

The real IP of the server is 109.202.107.10.

As soon as I updated in ruTorrent the reported IP to be the real IP, upload starting going as they were before when rTorrent wasn't in a docker container but with a manual package install and a manual VPN connection.

Just letting you know, not sure if you can do something about it but since the IP get updated by a script I guess you can fix it.

Thanks!

February 4, 20179 yr

Author

Found out a weird setting done by some of your process.

I've been using it for 3 days and I was wondering why there was almost no upload going on even with all the proper settings.

The issue was in the reported IP to tracker.

The IP reported is the internal ip of the VPN connection and not the real ip that the outside see.

The TUN0 adress is 10.4.55.159.

I can see it's also what the log show:

2017-02-04 19:57:37,316 DEBG 'rtorrent-script' stdout output:

[info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.4.55.159 different, marking for reconfigure

[info] Attempting to start rTorrent...

[info] Removing any rtorrent session lock files left over from the previous run...

But nobody will ever be able to acces that adress, except maybe people on the same VPN server.

The real IP of the server is 109.202.107.10.

As soon as I updated in ruTorrent the reported IP to be the real IP, upload starting going as they were before when rTorrent wasn't in a docker container but with a manual package install and a manual VPN connection.

Just letting you know, not sure if you can do something about it but since the IP get updated by a script I guess you can fix it.

Thanks!

a good spot, yes your quite right, getting the public ip is a tad tricky as i dont think i can get the info from openvpn, but i have a method i can use.

February 5, 20179 yr

Found out a weird setting done by some of your process.

I've been using it for 3 days and I was wondering why there was almost no upload going on even with all the proper settings.

The issue was in the reported IP to tracker.

The IP reported is the internal ip of the VPN connection and not the real ip that the outside see.

The TUN0 adress is 10.4.55.159.

I can see it's also what the log show:

2017-02-04 19:57:37,316 DEBG 'rtorrent-script' stdout output:

[info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.4.55.159 different, marking for reconfigure

[info] Attempting to start rTorrent...

[info] Removing any rtorrent session lock files left over from the previous run...

But nobody will ever be able to acces that adress, except maybe people on the same VPN server.

The real IP of the server is 109.202.107.10.

As soon as I updated in ruTorrent the reported IP to be the real IP, upload starting going as they were before when rTorrent wasn't in a docker container but with a manual package install and a manual VPN connection.

Just letting you know, not sure if you can do something about it but since the IP get updated by a script I guess you can fix it.

Thanks!

a good spot, yes your quite right, getting the public ip is a tad tricky as i dont think i can get the info from openvpn, but i have a method i can use.

Here's the line in the script I used before that was giving me the real outside ip of the VPN connection:

current_remote_ip=$(curl --connect-timeout "10" -s https://ipinfo.io/ip)

Not sure if that can help or not.

February 6, 20179 yr

Author

Found out a weird setting done by some of your process.

I've been using it for 3 days and I was wondering why there was almost no upload going on even with all the proper settings.

The issue was in the reported IP to tracker.

The IP reported is the internal ip of the VPN connection and not the real ip that the outside see.

The TUN0 adress is 10.4.55.159.

I can see it's also what the log show:

2017-02-04 19:57:37,316 DEBG 'rtorrent-script' stdout output:

[info] rTorrent listening interface IP 0.0.0.0 and VPN provider IP 10.4.55.159 different, marking for reconfigure

[info] Attempting to start rTorrent...

[info] Removing any rtorrent session lock files left over from the previous run...

But nobody will ever be able to acces that adress, except maybe people on the same VPN server.

The real IP of the server is 109.202.107.10.

As soon as I updated in ruTorrent the reported IP to be the real IP, upload starting going as they were before when rTorrent wasn't in a docker container but with a manual package install and a manual VPN connection.

Just letting you know, not sure if you can do something about it but since the IP get updated by a script I guess you can fix it.

Thanks!

a good spot, yes your quite right, getting the public ip is a tad tricky as i dont think i can get the info from openvpn, but i have a method i can use.

Here's the line in the script I used before that was giving me the real outside ip of the VPN connection:
current_remote_ip=$(curl --connect-timeout "10" -s https://ipinfo.io/ip)
Not sure if that can help or not.

thanks yes, i had something very similar in mind using cli tool "jq" and curl to query https://api.ipify.org/?format=json i will see if i can implement it this week.

February 7, 20179 yr

Just wanted to say I gave this a test, manually set my IP reported to tracker under settings to the VPN External IP.

I have seen a significant improvement in upload speeds. I just thought it must have been the speeds I was going to be getting via a VPN, but it has jumped 3-4 times per hour since I made the change.

Very good find kas123tt, and I look forward to your fix binhex.

Wob76

February 7, 20179 yr

Getting a 403 Forbidden when I try to access rtorrent in OMV.

Error in log

2017/02/07 02:05:34 [error] 762#762: *18 open() "/config/nginx/security/auth" failed (2: No such file or directory), client: 192.168.1.114, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "filebox:9080", referrer: "http://filebox:9080/"

also a list of the config dir

root@filebox:/media/3c1faf4b-5ae9-4fec-a79c-3629e8f06843/storage/appdata/rtorrent# ls -la
total 32
drwxrwxr-x 6 root root   118 Feb  7 01:59 .
drwxr-xr-x 3 root root    21 Feb  7 01:28 ..
-rw-r--r-- 1 root root  6973 Feb  7 02:17 access.log
drwxr-xr-x 5 root root    46 Feb  7 01:59 nginx
drwxrwxr-x 2 root root    93 Feb  7 01:59 openvpn
-rw-r--r-- 1 root root   162 Feb  7 01:28 perms.txt
drwxrwxrwx 4 root root    33 Feb  7 01:59 rtorrent
drwxr-xr-x 5 root root    43 Feb  7 01:59 rutorrent
-rwxrwxr-x 1 root root 17718 Feb  7 02:17 supervisord.log

Dunno why I cant access rutorrent

February 8, 20179 yr

I just set up a new unRAID box wit rtorrentvpn 0.9.6. I can't access the web interface at all. It requires a usename and password that are a complete mystery to me. I never made those. No prompts to make them. Nothing. How do I define those? There's nothing I can see in the template relating to authentication. I'm pulling my hair out a little trying to find the answer. Searching ain't helping.

February 8, 20179 yr

Author

I just set up a new unRAID box wit rtorrentvpn 0.9.6. I can't access the web interface at all. It requires a usename and password that are a complete mystery to me. I never made those. No prompts to make them. Nothing. How do I define those? There's nothing I can see in the template relating to authentication. I'm pulling my hair out a little trying to find the answer. Searching ain't helping.

taken from docker hub (linked in first post of this thread):-

Access ruTorrent (web ui)

http://<host ip>:9080/

or

https://<host ip>:9443/

Username:- admin

Password:- rutorrent

February 8, 20179 yr

Author

Getting a 403 Forbidden when I try to access rtorrent in OMV.

Error in log

2017/02/07 02:05:34 [error] 762#762: *18 open() "/config/nginx/security/auth" failed (2: No such file or directory), client: 192.168.1.114, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "filebox:9080", referrer: "http://filebox:9080/"

also a list of the config dir

root@filebox:/media/3c1faf4b-5ae9-4fec-a79c-3629e8f06843/storage/appdata/rtorrent# ls -la
total 32
drwxrwxr-x 6 root root   118 Feb  7 01:59 .
drwxr-xr-x 3 root root    21 Feb  7 01:28 ..
-rw-r--r-- 1 root root  6973 Feb  7 02:17 access.log
drwxr-xr-x 5 root root    46 Feb  7 01:59 nginx
drwxrwxr-x 2 root root    93 Feb  7 01:59 openvpn
-rw-r--r-- 1 root root   162 Feb  7 01:28 perms.txt
drwxrwxrwx 4 root root    33 Feb  7 01:59 rtorrent
drwxr-xr-x 5 root root    43 Feb  7 01:59 rutorrent
-rwxrwxr-x 1 root root 17718 Feb  7 02:17 supervisord.log

Dunno why I cant access rutorrent

i need that supervisord.log file before i can tell you why its not connecting, please post it here in its entirety (excluding username and password)

[Support] binhex - rTorrentVPN

Featured Replies

Top Posters In This Topic

Popular Days

Most Popular Posts

binhex

Beta

binhex

Posted Images

Top Posters In This Topic

Popular Days

Most Popular Posts

binhex

Beta

binhex

Posted Images

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)