karlpox Posted April 25, 2017 Share Posted April 25, 2017 I just installed the app. I can access deluge webgui but not flexget. Also the flexget in settings wont start. Quote Link to comment
NY152 Posted March 7, 2018 Share Posted March 7, 2018 Hello, I have a error when i try to access to webgui : ERR_CONNECTION_REFUSED Quote Link to comment
backupking Posted June 10, 2018 Share Posted June 10, 2018 hi is the any way to get downloads out of the appdata folder if I manually put folder there it just pauses the download using pia france fine backupking Quote Link to comment
nekromantik Posted July 12, 2018 Share Posted July 12, 2018 Great container! One question though, if the VPN goes down does Deluge connect normally via your router then? If so then is it possible to add a kill switch to this so that if openvpn is down then traffic goes out or in. Quote Link to comment
binhex Posted July 13, 2018 Share Posted July 13, 2018 (edited) 12 hours ago, nekromantik said: Great container! One question though, if the VPN goes down does Deluge connect normally via your router then? If so then is it possible to add a kill switch to this so that if openvpn is down then traffic goes out or in. Q9. Does DelugeVPN/SABnzbdVPN/rTorrentVPN prevnet ip leakage when the tunnel goes down (aka include a 'kill switch') ? A9. IP leakage is prevented by the use of iptables rules, this is significantly better than a kill switch, as it guarantee's at all times that ip leakage cannot and will not happen by blocking the ability for the application to communicate externally (web ui is allowed). Edited July 13, 2018 by binhex 1 1 Quote Link to comment
nekromantik Posted July 13, 2018 Share Posted July 13, 2018 Q9. Does DelugeVPN/SABnzbdVPN/rTorrentVPN prevnet ip leakage when the tunnel goes down (aka include a 'kill switch') ? A9. IP leakage is prevented by the use of iptables rules, this is significantly better than a kill switch, as it guarantee's at all times that ip leakage cannot and will not happen by blocking the ability for the application to communicate externally (web ui is allowed). Thanks that is good.Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
nekromantik Posted July 14, 2018 Share Posted July 14, 2018 (edited) hi so I got this running on a custom br0 interface with static IP. however I cannot access the UI on port 8112 anywhere on my network, only works from container itself. i noticed the iptables rules allows from 192.168.1.0/24 as source and destination and also allow 8112 as input from eth0 so not sure why I cant access from anywhere. edit: I did notice the listen address in core.conf is the tun0 address and not eth0. this could be the issue? 2018-07-15 00:21:48.419484 [info] Starting Supervisor... 2018-07-15 00:21:48,835 CRIT Set uid to user 0 2018-07-15 00:21:48,835 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-07-15 00:21:48,839 INFO supervisord started with pid 6 2018-07-15 00:21:49,842 INFO spawned: 'start-script' with pid 98 2018-07-15 00:21:49,846 INFO spawned: 'flexget' with pid 99 2018-07-15 00:21:49,848 INFO spawned: 'deluge-script' with pid 100 2018-07-15 00:21:49,851 INFO spawned: 'deluge-web-script' with pid 101 2018-07-15 00:21:49,855 INFO spawned: 'privoxy-script' with pid 102 2018-07-15 00:21:49,856 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2018-07-15 00:21:49,856 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-07-15 00:21:49,856 INFO success: flexget entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-07-15 00:21:49,856 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-07-15 00:21:49,856 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-07-15 00:21:49,856 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-07-15 00:21:49,860 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy 2018-07-15 00:21:49,862 DEBG 'flexget' stdout output: [info] Starting Flexget daemon... 2018-07-15 00:21:49,863 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-07-15 00:21:49,863 DEBG 'flexget' stdout output: Creating config.yml from template. 2018-07-15 00:21:49,869 DEBG 'privoxy-script' stdout output: [info] Privoxy set to disabled 2018-07-15 00:21:49,870 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 22965530039792 for <Subprocess at 22965530811208 with name privoxy-script in state RUNNING> (stderr)> 2018-07-15 00:21:49,870 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 22965530040944 for <Subprocess at 22965530811208 with name privoxy-script in state RUNNING> (stdout)> 2018-07-15 00:21:49,870 INFO exited: privoxy-script (exit status 0; expected) 2018-07-15 00:21:49,870 DEBG received SIGCLD indicating a child quit 2018-07-15 00:21:49,880 DEBG 'flexget' stderr output: cp: cannot stat '/config.yml': No such file or directory 2018-07-15 00:21:49,881 DEBG 'flexget' stderr output: chown: cannot access '/home/nobody/.flexget/config.yml': No such file or directory 2018-07-15 00:21:49,881 DEBG 'flexget' stderr output: chmod: cannot access '/home/nobody/.flexget/config.yml': No such file or directory 2018-07-15 00:21:49,881 DEBG 'flexget' stdout output: Using userdefined Flexget-webui password of password 2018-07-15 00:21:49,887 DEBG 'start-script' stdout output: [info] VPN config file (ovpn extension) is located at /config/openvpn/AirVPN_Sweden_UDP-443.ovpn 2018-07-15 00:21:49,898 DEBG 'start-script' stderr output: dos2unix: converting file /config/openvpn/AirVPN_Sweden_UDP-443.ovpn to Unix format... 2018-07-15 00:21:49,937 DEBG 'start-script' stdout output: [info] Default route for container is 192.168.1.1 2018-07-15 00:21:49,940 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-07-15 00:21:49,943 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-07-15 00:21:49,946 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-07-15 00:21:49,949 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-07-15 00:21:49,957 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2018-07-15 00:21:49,958 DEBG 'start-script' stderr output: RTNETLINK answers: File exists 2018-07-15 00:21:49,958 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2018-07-15 00:21:49,959 DEBG 'start-script' stdout output: default via 192.168.1.1 dev eth0 2018-07-15 00:21:49,959 DEBG 'start-script' stdout output: 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.75 2018-07-15 00:21:49,959 DEBG 'start-script' stdout output: -------------------- 2018-07-15 00:21:49,979 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2018-07-15 00:21:50,020 DEBG 'start-script' stdout output: [info] Docker network defined as 192.168.1.0/24 2018-07-15 00:21:50,097 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2018-07-15 00:21:50,100 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 192.168.1.0/24 -d 192.168.1.0/24 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 3539 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 3539 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 192.168.1.0/24 -d 192.168.1.0/24 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 3539 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 3539 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2018-07-15 00:21:50,101 DEBG 'start-script' stdout output: -------------------- [info] Starting OpenVPN... 2018-07-15 00:21:50,159 DEBG 'start-script' stdout output: [info] OpenVPN started 2018-07-15 00:21:50,660 DEBG 'flexget' stdout output: 2018-07-15 00:21 CRITICAL manager Failed to find configuration file config.yml 2018-07-15 00:21 INFO manager Tried to read from: /, /home/nobody/.flexget, /home/nobody/.config/flexget 2018-07-15 00:21:50,660 DEBG 'flexget' stderr output: Could not instantiate manager: No configuration file found. 2018-07-15 00:21:51,255 DEBG 'flexget' stderr output: Could not instantiate manager: Config `/home/nobody/.flexget/config.yml` does not appear to be a file. 2018-07-15 00:21:51,292 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 22965530004152 for <Subprocess at 22965530811856 with name flexget in state RUNNING> (stdout)> 2018-07-15 00:21:51,292 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 22965530845912 for <Subprocess at 22965530811856 with name flexget in state RUNNING> (stderr)> 2018-07-15 00:21:51,292 INFO exited: flexget (exit status 1; not expected) 2018-07-15 00:21:51,292 DEBG received SIGCLD indicating a child quit 2018-07-15 00:21:51,808 DEBG 'deluge-script' stdout output: [info] Deluge not running [info] Deluge listening interface IP 0.0.0.0 and VPN provider IP 10.x.xx.xx different, marking for reconfigure [info] Attempting to start Deluge... 2018-07-15 00:21:52,124 DEBG 'deluge-script' stdout output: [info] Deluge listening interface currently defined as 10.x.x.x [info] Deluge listening interface will be changed to 10.x.x.x [info] Saving changes to Deluge config file /config/core.conf... 2018-07-15 00:21:52,379 DEBG 'deluge-script' stdout output: [info] Deluge started 2018-07-15 00:21:52,677 DEBG 'deluge-web-script' stdout output: [info] Starting Deluge webui... Edited July 15, 2018 by nekromantik Quote Link to comment
nekromantik Posted July 15, 2018 Share Posted July 15, 2018 (edited) 59 minutes ago, Paul_Ber said: I use the Bridge setting for Network and Privilege on. I am not sure why it is not working for you. Someone else had same issue on bihex image you based it off. This was back in 2016 so should been fixed. I am pretty good with linux networking but this stumps me. I will try binhex latest and see if issue happens still. edit: same issue on binhex docker image. if I switch to bridged rather then custom bridge I can access web UI from LAN but cant from other containers. i have nginx container as reverse proxy that I want to use to access deluge UI from external sources so need container to container working. Edited July 15, 2018 by nekromantik Quote Link to comment
yanksno1 Posted July 19, 2018 Share Posted July 19, 2018 Got this setup, but deluge isn't working for me for the default password to the webui. Is it something else now? I'm on 1.3.14. Quote Link to comment
backupking Posted August 21, 2018 Share Posted August 21, 2018 (edited) On 6/30/2018 at 7:14 PM, Paul_Ber said: Downloads shouldn't going to your appdata folder. Also the mapping should keep appdata separate from your media to download. Ignore the /Dropbox mapping. hi I getting this error when I change the folder to any other then the one which is preset ie in deluge /data/ I get Permission denied when I change the folder can any one help what is wrong thanks backupking hi all looks like it was a mapping issue still learning with unraid working fine now conrad Edited August 21, 2018 by backupking Quote Link to comment
yanksno1 Posted December 3, 2019 Share Posted December 3, 2019 Hi, so yesterday I added a cache drive and moved everything over. Had to reset up the docker apps since they weren't there and a notice saying I needed to do it since I updated from v6 or something like that. Thought I did everything right in just pointing to the app folder and everything else but for some reason got an Error on a torrent I'd try to download. So I deleted that docker and image and tried resetting it up again. Now I can't get it to load using PIA. If I disable the VPN, it will load. Anything I should try to get it going again? Quote Link to comment
yanksno1 Posted December 3, 2019 Share Posted December 3, 2019 Okay thanks, it was Master. I'll try Dev when I get home. Quote Link to comment
The_Doctor Posted December 5, 2019 Share Posted December 5, 2019 Master Version: Not sure what is going on, just updated, and now it crashes without much in the logs. Debug mask set to true or false comes up with same logs I will install and test dev, as I no longer see a master version, only 2 dev versions available. < ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2019-12-04 17:03:37.527209 [info] System information Linux 642928f489f4 5.3.6-Unraid #2 SMP Wed Oct 16 14:28:06 PDT 2019 x86_64 GNU/Linux 2019-12-04 17:03:37.565416 [info] PUID defined as '99' 2019-12-04 17:03:37.760181 [info] PGID defined as '100' 2019-12-04 17:03:38.047748 [info] UMASK defined as '000' 2019-12-04 17:03:38.082860 [info] Permissions already set for volume mappings 2019-12-04 17:03:38.125948 [info] DELUGE_DAEMON_LOG_LEVEL not defined,(via -e DELUGE_DAEMON_LOG_LEVEL), defaulting to 'info' 2019-12-04 17:03:38.160930 [info] DELUGE_WEB_LOG_LEVEL not defined,(via -e DELUGE_WEB_LOG_LEVEL), defaulting to 'info' 2019-12-04 17:03:38.197591 [info] VPN_ENABLED defined as 'yes' 2019-12-04 17:03:38.245688 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/** > 2 Quote Link to comment
jsbroks Posted December 6, 2019 Share Posted December 6, 2019 I am getting the same issue. Keeps crashing 1 Quote Link to comment
Jens_Andersson Posted December 6, 2019 Share Posted December 6, 2019 (edited) got it working again by downloading pia vpn openfile and placing pia vpn config file in the openvpn directory. Edited December 6, 2019 by Jens_Andersson 1 Quote Link to comment
Flick Posted December 11, 2019 Share Posted December 11, 2019 On 12/6/2019 at 2:31 AM, Jens_Andersson said: got it working again by downloading pia vpn openfile and placing pia vpn config file in the openvpn directory. Had the same issue and this solution resolved it. Thanks! 1 Quote Link to comment
AeonicArchangel Posted December 11, 2019 Share Posted December 11, 2019 On 12/4/2019 at 7:07 PM, The_Doctor said: Master Version: Not sure what is going on, just updated, and now it crashes without much in the logs. Debug mask set to true or false comes up with same logs I will install and test dev, as I no longer see a master version, only 2 dev versions available. < ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2019-12-04 17:03:37.527209 [info] System information Linux 642928f489f4 5.3.6-Unraid #2 SMP Wed Oct 16 14:28:06 PDT 2019 x86_64 GNU/Linux 2019-12-04 17:03:37.565416 [info] PUID defined as '99' 2019-12-04 17:03:37.760181 [info] PGID defined as '100' 2019-12-04 17:03:38.047748 [info] UMASK defined as '000' 2019-12-04 17:03:38.082860 [info] Permissions already set for volume mappings 2019-12-04 17:03:38.125948 [info] DELUGE_DAEMON_LOG_LEVEL not defined,(via -e DELUGE_DAEMON_LOG_LEVEL), defaulting to 'info' 2019-12-04 17:03:38.160930 [info] DELUGE_WEB_LOG_LEVEL not defined,(via -e DELUGE_WEB_LOG_LEVEL), defaulting to 'info' 2019-12-04 17:03:38.197591 [info] VPN_ENABLED defined as 'yes' 2019-12-04 17:03:38.245688 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/** > I ran into the same problem it looks like everyone was having. I didn't realize it until last night and had a few minutes to do some digging. It looks like in the latest version of the binhex container, the VPN_REMOTE and VPN_PORT variables are no longer being passed. That might not be the full story because, like I said, I only had a few minutes to look into it. I simply had to add the remote setting back into my openvpn config file to get things mostly working. Quote Link to comment
shanegetsu Posted October 17, 2020 Share Posted October 17, 2020 so I realize it's been a minute since there was a reply here, but I thought I would try anyway. I use the binhex delugevpn docker and followed spaceinvarder1's videos about a year ago, and have used sonarr for shows, and manually download anime. I want to automate that with an RSS feed. this seems like the simplest solution, but I can't seem to get this to work. do I have to completely delete the other docker i've had working, or is stopping it enough for this to work? I cant seem to get the docker to start. it just sits there as "stopped" every time I try and start it. any help would be appreciated Quote Link to comment
razage Posted June 2, 2021 Share Posted June 2, 2021 I know it has been a while since this was active, but I'll try anyway. I'm using the dev version of this and it's working fine as far as I can tell. My one issue is that the flexget daemon doesn't run at startup/reboot. It's not a super big deal to run the command myself, but it'd be nice if I didn't have to. Is this a known issue, or something wrong on my end somehow? Quote Link to comment
Paul_Ber Posted October 11, 2021 Author Share Posted October 11, 2021 (edited) Overview: Support for Flexget Template. Update: October 10, 2021 no longer a 2 in 1 container. I will delete my Dockhub/Github Repositories for this Docker in about a month, please migrate to Binhex-delugevpn and you need Flexget then use this template. Edited October 11, 2021 by Paul_Ber Quote Link to comment
pieman16 Posted October 11, 2021 Share Posted October 11, 2021 I was going to try this on my unraid server. Now it's stuck inside the docker showing 2 containers and will not uninstall. I tried to manually uninstall it. But it keeps trying to rebuild your container. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.