On 10/18/2019 at 7:40 PM, ErikM1970 said:

Thank you!


Sent from my iPhone using Tapatalk Pro

Hi, I'd appreciate your help in fixing this.

 

Can you run

/usr/bin/sensors -A

on your command line and post back the results (pm if you prefer) ?

 

v4.15.2 is available on Apple App Store !

 

It fixes an issue that was preventing the execution of some commands on the server.

 

***NOTE: this completes the fix that was made previously available for Android.

As requested:

 

coretemp-isa-0000
CPU Temp:     +41.0°C  (high = +80.0°C, crit = +90.0°C)
Core 0:       +36.0°C  (high = +80.0°C, crit = +90.0°C)
Core 1:       +40.0°C  (high = +80.0°C, crit = +90.0°C)
Core 2:       +41.0°C  (high = +80.0°C, crit = +90.0°C)
Core 3:       +40.0°C  (high = +80.0°C, crit = +90.0°C)
Core 4:       +39.0°C  (high = +80.0°C, crit = +90.0°C)
Core 5:       +39.0°C  (high = +80.0°C, crit = +90.0°C)
Core 6:       +40.0°C  (high = +80.0°C, crit = +90.0°C)
Core 7:       +37.0°C  (high = +80.0°C, crit = +90.0°C)

power_meter-acpi-0
power1:      203.00 W  (interval =   1.00 s)

Thanks !

 

I'll work with that.

I can't put a finger on it.. with your data and preferences set to Farenheit, it returns 73 degrees.

 

What Unraid version are you running (to have an idea when this may have started) and what are your temperature settings ?

Unraid v6.7.2

This issue manifested itself right before I sent the email in this forum approximately three months ago. I think it happened when I installed 4.15 maybe?

As for my settings, please see graphic...




Sent from my iPhone using Tapatalk Pro

v4.16.0 is available on Apple and Google Stores !

 

- Initial 6.8.x support

 

Let me know if you find any issues

 

P.D.: still can't figure out the temperature unit issue, but I think it's on the plugin side

Edited October 23, 20196 yr by jbrodriguez

Hi, I'm able to connect to my server using http, so it should work.

 

Can you try this

- Go to Settings > Open Source Libraries
- After the react native credits, you’ll find a debug button, hit it once (counter should read 1)
- Now try connecting manually via http (you should see a ‘debug initialized ‘ message at the bottom)
- It should go back to the main screen
- Go to manual add again
- It should be displaying some debug message
- Take a screenshot and send it over (pm if prefer)
 

Hi, since upgrading recently, I have been having an issue logging in - in that I can't.

 

Unraid version: 6.8.0 Stable

Controlr version: 4.16.0

OS: Android (December 2019 patch)

Phone: Galaxy S9

Protocol for accessing Unraid: http

 

After upgrading from last stable of unraid to the current stable I tried to log in via Controlr and it just hung. So I removed the profile and tried to add it again. 

 

I experienced the following (repeatedly):

 

Automated method:

 

Click +

Add username and password

Keep https button unchecked

Hit Discover

Goes back to Server UI and does nothing.

 

Manual method:

 

Same as above but add hostname (also tried using IP address)

Hangs with a spinning wheel and a message saying 'Adding host <IP address> indefinitely.

 

Port is port 80 (unchanged from unraid default). Nothing else has changed since upgrading (except password change) when all worked well and has done since you released the app. I can log into the Unraid GUI via a browser just fine.

 

Have removed app and reinstalled. Same thing happens. Have also reset phone to factory (for another reason) and that didn't have an effect either.

 

In the Unraid log there is a corresponding line for each attempt:

 

'Dec 29 17:11:37 unraid webGUI: Unsuccessful login user root from <IP address>'

 

I use a reasonably long password with mixed case letters, numbers and symbols.

Hi, is it possible that some characters in the password are not being echoed correctly ?

 

Just about the only thing I can think of.

 

In any case, try the following:

 

- Go to Settings > Open Source Libraries
- After the react native credits, you’ll find a debug button, hit it once (counter should read 1)
- Now try connecting manually (you should see a ‘debug initialized ‘ message at the bottom)
- It should go back to the main screen
- Go to manual add again
- It should be displaying some debug message
- Take a screenshot and send it over

 

3 hours ago, jbrodriguez said:

Hi, is it possible that some characters in the password are not being echoed correctly ?

 

Just about the only thing I can think of.

 

In any case, try the following:

 

- Go to Settings > Open Source Libraries
- After the react native credits, you’ll find a debug button, hit it once (counter should read 1)
- Now try connecting manually (you should see a ‘debug initialized ‘ message at the bottom)
- It should go back to the main screen
- Go to manual add again
- It should be displaying some debug message
- Take a screenshot and send it over

 

Hi, done.

 

Trying automated find, results in same behaviour as described above and no debug log to post.

 

Trying manual add, results in the following:

 

EDIT: Googled the error, reckon it is a special character parse problem. Given the complex password I use I'm guessing your gut feeling is right.

EDIT2: if it helps, I'm willing to change my password and share the password that doesn't seem to be working to help debug. It's auto generated by the password manager anyway so no bother.

Edited December 29, 20196 yr by danioj

Hi, the JSON parse error is about the ControlR plugin, I think it believes you're on https, while you're actually on http.

 

There should be another debug line below the scanServerCheck.

 

Can you try setting your Unraid SSL setting to 'no', just to check if that solves the issue ?

On 12/30/2019 at 11:05 AM, jbrodriguez said:

Hi, the JSON parse error is about the ControlR plugin, I think it believes you're on https, while you're actually on http.

 

There should be another debug line below the scanServerCheck.

 

Can you try setting your Unraid SSL setting to 'no', just to check if that solves the issue ?

Hi, I did as you asked. My SSL setting was Auto (as is the unraid default I believe), i set it to 'no' as requested and tried again. The result was identical. I won't post the image again as it was literally identical, down to the unraid log of unsuccessful login.

 

You mention that there should be another debug line, there is not. I have tried scrolling, copying etc, and nothing.

Mmm, ok  that's odd ... it means that the server is actually returning some data.

 

Couple of thoughs: do you have a reverse proxy in front of the unraid ui (letsencrypt or similar) ? Is the unraid UI on some port other than 80 ?

 

Finally, can you try the instructions here https://github.com/jbrodriguez/controlr-support ?

Unraid v6.7.2

This issue manifested itself right before I sent the email in this forum approximately three months ago. I think it happened when I installed 4.15 maybe?

As for my settings, please see graphic...




Sent from my iPhone using Tapatalk Pro

Please don’t forget about my temperature issue.


—Sent from my iPhone using Tapatalk Pro

I haven't forgotten, it's more like I haven't been able to replicate it 😮

 

I need to work on the plugin, so I'll try something as soon as I get there.

I made a small change to the ControlR plugin (now v2020.01.04, v2.7.1), can you check if that solves your issue @ErikM1970 ?

I made a small change to the ControlR plugin (now v2020.01.04, v2.7.1), can you check if that solves your issue @ErikM1970 ?

I just applied the updated plugin and now the temperature value no longer appears whatsoever on the iOS application.


—Sent from my iPhone using Tapatalk Pro

Well, there's some progress

 

Can you follow the steps in https://github.com/jbrodriguez/controlr-support

 

Also, one more time

/usr/bin/sensors -A

 

Well, there's some progress [emoji4]
 
Can you follow the steps in https://github.com/jbrodriguez/controlr-support
 
Also, one more time

/usr/bin/sensors -A

 

Done!


—Sent from my iPhone using Tapatalk Pro

Hi, I cannot connect to my server, this is what it says:

Hi that error is about the plugin, if you haven't installed it, there shouldn't be a problem.

 

Can you follow the steps in https://github.com/jbrodriguez/controlr-support ?

Hey @ErikM1970, I check the support files you sent but I can't seen anything unusual with them.

 

So I created a new version of the plugin, to try and debug the issue.

 

So pls try the following

- Upgrade the plugin to v2020.01.11 (2.17.2)

- On the command line do

killall controlr
/usr/local/emhttp/plugins/controlr/controlr -port 2378 -certdir /boot/config/ssl/certs -showups

That last `-showups` should be there only if you have UPS enabled in the controlr settings, otherwise just remove that part.

 

Then access the server from the mobile app, it will display some log lines in the command line, please post those log lines here (or send them via pm if you prefer)

Edited January 11, 20206 yr by jbrodriguez

Hi,

 

i use a vpn to my homenetwork and want to start the server from your app. This dosent work any more. I can use everything fine when i`m normaly connected to the local lan. I use the fritzbox vpn client. 

 

Can you help here?

Thx

Hi, using the VPN should be the same as being on the physical LAN, I don't have any experience with fritzbox though.

 

One thing you need to make sure is that port 2382 is available on the VPN.

 

Maybe you're restricting some ports if coming from the vpn tunnel ?