ucrbuffalo Posted May 21, 2018 Share Posted May 21, 2018 On 5/20/2018 at 12:44 AM, aptalca said: Did you log into duckdns to verify that the ip address they have is correct? Yes. I manually checked my public IP address and it matches correctly. Quote Link to comment
ebnerjoh Posted May 22, 2018 Share Posted May 22, 2018 Hi, I am running the LetsEncrypt Container with NextCloud and an apache-Container without issues. Now I have some questions:: 1) The Apache Container is not working anymore. Should I move to an NGINX-Container or could I run it on the LetsEncrypt-Docker? 2) If I could run it on the LetsEncrypt-Docker, do you have an example vhost config? 3) I have some webapps which still need PHP5 and not working with PHP7. What option do I have here? As far as I know NGINX (and LetsEncrpyt) is based on PHP7? Br, Johannes Quote Link to comment
aptalca Posted May 22, 2018 Share Posted May 22, 2018 5 hours ago, ebnerjoh said: Hi, I am running the LetsEncrypt Container with NextCloud and an apache-Container without issues. Now I have some questions:: 1) The Apache Container is not working anymore. Should I move to an NGINX-Container or could I run it on the LetsEncrypt-Docker? 2) If I could run it on the LetsEncrypt-Docker, do you have an example vhost config? 3) I have some webapps which still need PHP5 and not working with PHP7. What option do I have here? As far as I know NGINX (and LetsEncrpyt) is based on PHP7? Br, Johannes There is no apache in letsencrypt, you would have to either run it on a separate apache container and reverse proxy, or run it on nginx. Only php7 in letsencrypt. You can however set up a separate php container (official one might do) that listens on a port and put that ip and port in your nginx config for that specific location Quote Link to comment
tomahawk1277 Posted May 22, 2018 Share Posted May 22, 2018 Hi all, I'm trying to use the nginx module called "ngx_stream_core_module" (available since version 1.9.0) but it doesn't seem to be enabled in this Letsencrypt docker. The man page says it's "enabled with the --with-stream" option. Is that something I have control over in the docker? The reason I want this module is to forward non-http ports to different IPs (yes, just like my router does, but with the added ability to filter out certain things or block file access). Thanks! Quote Link to comment
aptalca Posted May 23, 2018 Share Posted May 23, 2018 (edited) 18 hours ago, tomahawk1277 said: Hi all, I'm trying to use the nginx module called "ngx_stream_core_module" (available since version 1.9.0) but it doesn't seem to be enabled in this Letsencrypt docker. The man page says it's "enabled with the --with-stream" option. Is that something I have control over in the docker? The reason I want this module is to forward non-http ports to different IPs (yes, just like my router does, but with the added ability to filter out certain things or block file access). Thanks! It's already enabled Make sure your nginx.conf has this line in it: https://github.com/linuxserver/docker-letsencrypt/blob/master/root/defaults/nginx.conf#L6 Edited May 23, 2018 by aptalca Quote Link to comment
tomahawk1277 Posted May 23, 2018 Share Posted May 23, 2018 2 hours ago, aptalca said: It's already enabled Make sure your nginx.conf has this line in it: https://github.com/linuxserver/docker-letsencrypt/blob/master/root/defaults/nginx.conf#L6 Ah! Mine didn't have the include line for some reason. It recognizes the stream command now. Thanks aptalca! Quote Link to comment
aptalca Posted May 23, 2018 Share Posted May 23, 2018 17 minutes ago, tomahawk1277 said: Ah! Mine didn't have the include line for some reason. It recognizes the stream command now. Thanks aptalca! When we update certain default conf files like nginx.conf or the default site conf, we don't overwrite the existing files because they contain user custom config. That's why we started tagging the conf files with dates and a link to view recent changes so you can make those in your config manually: https://github.com/linuxserver/docker-letsencrypt/blob/master/root/defaults/default#L1 1 Quote Link to comment
Hoanh Posted May 23, 2018 Share Posted May 23, 2018 Hi guys. My apache docker just died yesterday. So, I gave a letsencrypt a try. It work with my nextcloud and my website. However, a problem is I cannot use DNS resolver to access my web page in the internal network(LAN). Out side, It works no problem. I use PFsense. Any ideal? Thank. Quote Link to comment
aptalca Posted May 23, 2018 Share Posted May 23, 2018 2 hours ago, Hoanh said: Hi guys. My apache docker just died yesterday. So, I gave a letsencrypt a try. It work with my nextcloud and my website. However, a problem is I cannot use DNS resolver to access my web page in the internal network(LAN). Out side, It works no problem. I use PFsense. Any ideal? Thank. Pfsense system / advanced / nat, enable nat reflection and automatic outbound 1 Quote Link to comment
Hoanh Posted May 24, 2018 Share Posted May 24, 2018 Awesome. Thank you very much! Quote Link to comment
nka Posted May 24, 2018 Share Posted May 24, 2018 I've search a bit but there's 81 pages... so I might have missed that. Is there a way to have multiple domain ? Like domain1.com and domain2.com with some subdomain ? I can configure it manually (already done in fact), but I can I'm not sure about the CertBot to make a renew the cert ? Thanks ! Quote Link to comment
Encino Stan Posted May 24, 2018 Share Posted May 24, 2018 (edited) 3 hours ago, nka said: I've search a bit but there's 81 pages... so I might have missed that. Is there a way to have multiple domain ? Like domain1.com and domain2.com with some subdomain ? I can configure it manually (already done in fact), but I can I'm not sure about the CertBot to make a renew the cert ? Thanks ! On 3/25/2018 at 1:42 AM, geekypenguin said: Advanced view > Extra parameters then the full command is -e EXTRA_DOMAINS=<domain2>,<domain3> etc Thanks! Documented here: https://github.com/linuxserver/docker-letsencrypt#parameters Edited May 24, 2018 by Encino Stan 1 Quote Link to comment
Pducharme Posted May 24, 2018 Share Posted May 24, 2018 anyone has a working config for a Nextcloud Reverse proxy with NGINX? (Lets'Encrypt Docker). My apache docker died yesterday like everyone else that tried to restart it. I moved all my other Reverse proxies with much effort, but the NextCloud one doesnt want. Also, what are in your working config file of Nextcloud itselft (not just the NGINX config). Thanks Quote Link to comment
nka Posted May 24, 2018 Share Posted May 24, 2018 (edited) 39 minutes ago, Encino Stan said: Documented here: https://github.com/linuxserver/docker-letsencrypt#parameters Working, thanks ! :) edit: And sorry, didnt saw that when I looked at the config! Edited May 24, 2018 by nka Quote Link to comment
nka Posted May 24, 2018 Share Posted May 24, 2018 37 minutes ago, Pducharme said: anyone has a working config for a Nextcloud Reverse proxy with NGINX? (Lets'Encrypt Docker). My apache docker died yesterday like everyone else that tried to restart it. I moved all my other Reverse proxies with much effort, but the NextCloud one doesnt want. Also, what are in your working config file of Nextcloud itselft (not just the NGINX config). Thanks I'm using this docker along with OAuth2 Proxy.... getting Hosted website and reverse proxy with (or without if I don't need it) Google Auth is perfect! Quote Link to comment
Aurao Posted May 24, 2018 Share Posted May 24, 2018 How would I go about setting up a cert for a second domain? Quote Link to comment
Pducharme Posted May 24, 2018 Share Posted May 24, 2018 I followed the article here : https://blog.linuxserver.io/2017/05/10/installing-nextcloud-on-unraid-with-letsencrypt-reverse-proxy/ I have my DNS entry with the subdomain. If I do not use the subdomain conf file for Nextcloud, I can see the default NGINX page. When I enable the subdomain conf, I got the error in the browser (i.e.: https://cloud.mydomain.com). 500 Internal Server Error nginx/1.12.2 Is anyone successfully ran the nextcloud docker behind a NGINX reverse proxy following the guide ?? Here is my config file : cloud.subdomain.conf (tried the proxy_pass to https://$upstream_cloud:4443; and also with https://$upstream_cloud:443 since it wasn't clear if it was the SSL port or the Port that the nextcloud run, both fail). # make sure that your dns has a cname set for nextcloud # edit your nextcloud container's /config/www/nextcloud/config/config.php file and change the server address info as described # at the end of the following article: https://blog.linuxserver.io/2017/05/10/installing-nextcloud-on-unraid-with-letsencrypt-reverse-proxy/ server { listen 443 ssl; server_name cloud.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_cloud cloud; proxy_max_temp_file_size 8092m; proxy_pass https://$upstream_cloud:4443; } } Here is my config file of NextCloud : <?php $CONFIG = array ( 'memcache.local' => '\\OC\\Memcache\\APCu', 'datadirectory' => '/data', 'instanceid' => 'ock3zdmauibe', 'passwordsalt' => 'xxxxxxxxxxxxxxxxxxxxxxxxx/bEaYx', 'secret' => 'xxxxxxxxxxxxx+64Ze5W7tkOyYNzOgxhiWiLJItx8zWGrZM3', 'trusted_domains' => array ( 0 => '192.168.2.6:4443', 1 => 'cloud.mydomain.com', ), 'overwrite.cli.url' => 'https://cloud.mydomain.com', 'overwritehost' => 'cloud.mydomain.com', 'overwriteprotocol' => 'https', 'dbtype' => 'mysql', 'version' => '11.0.1.2', 'dbname' => 'nextcloud', 'dbhost' => '192.168.2.6', 'dbtableprefix' => 'oc_', 'dbuser' => 'myuser', 'dbpassword' => 'mypassword', 'logtimezone' => 'UTC', 'installed' => true, 'maintenance' => false, 'loglevel' => 2, ); Quote Link to comment
Pducharme Posted May 24, 2018 Share Posted May 24, 2018 45 minutes ago, Aurao said: How would I go about setting up a cert for a second domain? Edit your Docker setting of letsencrypt docker, enable the "advanced mode" in top right. Then, in Extra parameters add: -e EXTRA_DOMAINS=domain2.com Quote Link to comment
Aurao Posted May 24, 2018 Share Posted May 24, 2018 Just now, Pducharme said: Edit your Docker setting of letsencrypt docker, enable the "advanced mode" in top right. Then, in Extra parameters add: -e EXTRA_DOMAINS=domain2.com do i need to add the -e? I have EXTRA_DOMAINS but not -e EXTRA_DOMAINS Quote Link to comment
Pducharme Posted May 24, 2018 Share Posted May 24, 2018 2 minutes ago, Aurao said: do i need to add the -e? I have EXTRA_DOMAINS but not -e EXTRA_DOMAINS Yes ! Quote Link to comment
Aurao Posted May 24, 2018 Share Posted May 24, 2018 Just now, Pducharme said: Yes ! I just change it to -e EXTRA_DOMAINS and now in the logs it's not showing the variable or values Quote Link to comment
Pducharme Posted May 24, 2018 Share Posted May 24, 2018 1 minute ago, Aurao said: I just change it to -e EXTRA_DOMAINS and now in the logs it's not showing the variable or values I have exactly this in mine : -e EXTRA_DOMAINS=best-network.info works OK for me. Quote Link to comment
Aurao Posted May 24, 2018 Share Posted May 24, 2018 (edited) 5 minutes ago, Pducharme said: I have exactly this in mine : -e EXTRA_DOMAINS=best-network.info works OK for me. odd, how do i need to set the location in the site-conf? right now i have domainA.com set up with the cert and all of my locations are just sub-directories such as /sonarr how do i need to set this up for domainB.com? For the location do i need to add the full address doimainB.com/sonarr and not just the sub-directory? I really want to switch to subdomains (sonarr.domainB.com) but one step at a time lol Edited May 24, 2018 by Aurao Quote Link to comment
aptalca Posted May 25, 2018 Share Posted May 25, 2018 6 hours ago, Pducharme said: I followed the article here : https://blog.linuxserver.io/2017/05/10/installing-nextcloud-on-unraid-with-letsencrypt-reverse-proxy/ I have my DNS entry with the subdomain. If I do not use the subdomain conf file for Nextcloud, I can see the default NGINX page. When I enable the subdomain conf, I got the error in the browser (i.e.: https://cloud.mydomain.com). 500 Internal Server Error nginx/1.12.2 Is anyone successfully ran the nextcloud docker behind a NGINX reverse proxy following the guide ?? Here is my config file : cloud.subdomain.conf (tried the proxy_pass to https://$upstream_cloud:4443; and also with https://$upstream_cloud:443 since it wasn't clear if it was the SSL port or the Port that the nextcloud run, both fail). # make sure that your dns has a cname set for nextcloud # edit your nextcloud container's /config/www/nextcloud/config/config.php file and change the server address info as described # at the end of the following article: https://blog.linuxserver.io/2017/05/10/installing-nextcloud-on-unraid-with-letsencrypt-reverse-proxy/ server { listen 443 ssl; server_name cloud.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_cloud cloud; proxy_max_temp_file_size 8092m; proxy_pass https://$upstream_cloud:4443; } } Here is my config file of NextCloud : <?php $CONFIG = array ( 'memcache.local' => '\\OC\\Memcache\\APCu', 'datadirectory' => '/data', 'instanceid' => 'ock3zdmauibe', 'passwordsalt' => 'xxxxxxxxxxxxxxxxxxxxxxxxx/bEaYx', 'secret' => 'xxxxxxxxxxxxx+64Ze5W7tkOyYNzOgxhiWiLJItx8zWGrZM3', 'trusted_domains' => array ( 0 => '192.168.2.6:4443', 1 => 'cloud.mydomain.com', ), 'overwrite.cli.url' => 'https://cloud.mydomain.com', 'overwritehost' => 'cloud.mydomain.com', 'overwriteprotocol' => 'https', 'dbtype' => 'mysql', 'version' => '11.0.1.2', 'dbname' => 'nextcloud', 'dbhost' => '192.168.2.6', 'dbtableprefix' => 'oc_', 'dbuser' => 'myuser', 'dbpassword' => 'mypassword', 'logtimezone' => 'UTC', 'installed' => true, 'maintenance' => false, 'loglevel' => 2, ); This was solved through discord, but for reference, the issue stemmed from incorrectly editing the nextcloud proxy conf. In the version posted above, nginx would be trying to connect to a container named "cloud" which does not exist Quote Link to comment
aptalca Posted May 25, 2018 Share Posted May 25, 2018 6 hours ago, Aurao said: odd, how do i need to set the location in the site-conf? right now i have domainA.com set up with the cert and all of my locations are just sub-directories such as /sonarr how do i need to set this up for domainB.com? For the location do i need to add the full address doimainB.com/sonarr and not just the sub-directory? I really want to switch to subdomains (sonarr.domainB.com) but one step at a time lol You need to create a new server block for the second domain the same way you create new server blocks for subdomains. Look at the cp subdomain example and replicate it Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.