SpaceInvaderOne Posted January 22, 2018 Share Posted January 22, 2018 This video is an overview and a quick tutorial on the newly released unRAID 6.4.0 stable. This video will compare side by side unRAID 6.4.0 with its predecessor 6.3.5 and see the differences and improvements. It shows how to safely upgrade from 6.3 to 6.4 then how to set up your SSL certificate for HTTPS access and then how to set up an encrypted drive for the array. 7 1 Quote Link to comment
ljm42 Posted January 22, 2018 Share Posted January 22, 2018 *Very nice!* This is an excellent overview of the new features in 6.4 and the things to watch our for during the upgrade. It pairs very nicely with this thread: The only extra thing I'd call out is if you have a standard off-the-shelf router and you get the "rebinding error" while trying to provision your SSL Certificate, give it 10 minutes and try again. Sometimes it just takes a little time for the DNS changes to go through. Quote Link to comment
francrouge Posted January 22, 2018 Share Posted January 22, 2018 For a plex server is it worth it to put encryption ? Or it is going to slow down the process of getting the files thx Quote Link to comment
SpaceInvaderOne Posted January 22, 2018 Author Share Posted January 22, 2018 15 hours ago, ljm42 said: *Very nice!* This is an excellent overview of the new features in 6.4 and the things to watch our for during the upgrade. It pairs very nicely with this thread: The only extra thing I'd call out is if you have a standard off-the-shelf router and you get the "rebinding error" while trying to provision your SSL Certificate, give it 10 minutes and try again. Sometimes it just takes a little time for the DNS changes to go through. Glad you like it @ljm42 Yeah I should have mentioned more about DNS. I just helped a friend set his up over TeamViewer and we had to change the DNS on the commercial router's DHCP server to give out googles before it would work Quote Link to comment
mikegg Posted January 23, 2018 Share Posted January 23, 2018 Great video as always. I'm interested in the performance while using encryption. Anything to report so far? Quote Link to comment
ljm42 Posted January 23, 2018 Share Posted January 23, 2018 18 hours ago, francrouge said: For a plex server is it worth it to put encryption ? Or it is going to slow down the process of getting the files 1 hour ago, mikegg said: Great video as always. I'm interested in the performance while using encryption. Anything to report so far? https encryption? There is no noticeable performance hit. The 6.4 webgui is so much faster you wouldn't notice it even if there was disk encryption? I haven't seen anybody talk about the performance aspects of this. You'll probably have better luck asking in the main release note thread Quote Link to comment
francrouge Posted January 23, 2018 Share Posted January 23, 2018 4 hours ago, ljm42 said: https encryption? There is no noticeable performance hit. The 6.4 webgui is so much faster you wouldn't notice it even if there was disk encryption? I haven't seen anybody talk about the performance aspects of this. You'll probably have better luck asking in the main release note thread cool thx i'm gonna wait to see if we can do it and not have to format every hdd. Quote Link to comment
ieronymous Posted April 8, 2020 Share Posted April 8, 2020 In 6.8.3 edition how do you enable https???? It seems that some options are gone from the identification tab Quote Link to comment
Konfitüre Posted April 20, 2020 Share Posted April 20, 2020 On 4/8/2020 at 3:00 PM, ieronymous said: In 6.8.3 edition how do you enable https???? It seems that some options are gone from the identification tab is it working without this option? Quote Link to comment
itimpi Posted April 20, 2020 Share Posted April 20, 2020 On 4/8/2020 at 2:00 PM, ieronymous said: In 6.8.3 edition how do you enable https???? It seems that some options are gone from the identification tab It is now done via the Management Access settings Quote Link to comment
Konfitüre Posted April 20, 2020 Share Posted April 20, 2020 33 minutes ago, itimpi said: It is now done via the Management Access settings Yes but i have only a self-signed certificate and i don't know how to make and use one with letsencrypt. I can't push on "PROVISION" Quote Link to comment
Konfitüre Posted April 25, 2020 Share Posted April 25, 2020 Is it working without this option or not and necessary ?? Quote Link to comment
Abigel Posted April 26, 2020 Share Posted April 26, 2020 Hi, I have a problem and am hoping somebody can help me. I moved data from one disk to another. But it was dry mode. Than I format this disk. An create a new config like in the video without the parity drive. Now I realized that and want to rebuild the disk with the parity disk but i don't know the right way. If I stop the array and put the parity again in the array I think a parity check will start. What is to do, to start a rebuild? Quote Link to comment
itimpi Posted April 26, 2020 Share Posted April 26, 2020 1 hour ago, Abigel said: Hi, I have a problem and am hoping somebody can help me. I moved data from one disk to another. But it was dry mode. Than I format this disk. An create a new config like in the video without the parity drive. Now I realized that and want to rebuild the disk with the parity disk but i don't know the right way. If I stop the array and put the parity again in the array I think a parity check will start. What is to do, to start a rebuild? I am very confused by the exact sequence of steps you mention, and thus the exact state of your system. However, if you formatted the drive while you still had parity, then as the pop-up dialog would have warned you that you are erasing all data from the drive AND updating parity to reflect this. in such a case there is no way to rebuild the disk that has just been formatted. Quote Link to comment
Abigel Posted April 26, 2020 Share Posted April 26, 2020 3 minutes ago, itimpi said: I am very confused by the exact sequence of steps you mention, and thus the exact state of your system. However, if you formatted the drive while you still had parity, then as the pop-up dialog would have warned you that you are erasing all data from the drive AND updating parity to reflect this. in such a case there is no way to rebuild the disk that has just been formatted. Before I formatted the drive, i reset the config file like in the video. So the Parity was not assigned in the array and the data is in the parity. My problem is now: I have an array with unassigned parity A empty disk which I want to recover/rebuild from the parity. I am afraid that when I put the parity again in the array, a partity check start and my parity data that I want for the empty disk is lost. I want to add the parity again in the array without starting a parity check and than rebuild one disk. Can you help me please? Quote Link to comment
itimpi Posted April 26, 2020 Share Posted April 26, 2020 If you have done NO writes to the array since removing parity, then you can use Tools >> New Config with option to retain current assignments assign the parity drive; on the Main tab click the Parity is Valid checkbox and then start the array. This will start the array without writing anything to parity. You now stop the array; unassign the disk you are trying to recover; restart the array. If parity is valid you will now see the disk being emulated and its contents visible. If that is the case then you can stop the array; assign the disk to be rebuilt, s tart the array to rebuild the contents of the emulated disk to the physical drive. If the emulated drive after doing step 5 does not show your data that may mean parity is not valid. If the difference is minor then you may find the drive shows as unmountable and be able to run a file system repair on the emulated drive before attempting to rebuild it. It is worth emphasising that the rebuild only puts back what is shown on the emulated drive, so no point in attempting a rebuild if no data is showing at that point. In case it is not obvious the parity drive contains no actual data, and has no understanding of data. What it does contain is the information to restore the bit pattern on a missing drive using the combination of a particular sector on ALL the other data drives plus the parity drive. 1 Quote Link to comment
Abigel Posted April 26, 2020 Share Posted April 26, 2020 11 hours ago, itimpi said: If you have done NO writes to the array since removing parity, then you can use Tools >> New Config with option to retain current assignments assign the parity drive; on the Main tab click the Parity is Valid checkbox and then start the array. This will start the array without writing anything to parity. You now stop the array; unassign the disk you are trying to recover; restart the array. If parity is valid you will now see the disk being emulated and its contents visible. If that is the case then you can stop the array; assign the disk to be rebuilt, s tart the array to rebuild the contents of the emulated disk to the physical drive. If the emulated drive after doing step 5 does not show your data that may mean parity is not valid. If the difference is minor then you may find the drive shows as unmountable and be able to run a file system repair on the emulated drive before attempting to rebuild it. It is worth emphasising that the rebuild only puts back what is shown on the emulated drive, so no point in attempting a rebuild if no data is showing at that point. In case it is not obvious the parity drive contains no actual data, and has no understanding of data. What it does contain is the information to restore the bit pattern on a missing drive using the combination of a particular sector on ALL the other data drives plus the parity drive. Thank you, you have safed my day! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.