22 minutes ago, ich777 said:

Which parameters?

The key, the ID and relay server info, the password, etc...
I know some of that goes in the client, but I was fairly certain at least of it had to be entered on the server side. No?
If not, how does the client know which server to connect to, and how does the server (in this case the container) know which clients to listen to and accept connections from?

 

EDIT:  I have ID and relay server info that are no longer valid (yes, due to CGNAT).  Where does that get changed or updated?

Edited September 26, 20241 yr by Elmojo
more info

Ok, I figured it out.

For anyone finding this later, and wondering how to make it all play nice:

1) Install this Rustdesk AIO container using whatever instructions are provided
2) Install Tailscale on all machines that need to connect
3) Get the Tailnet IP of your server (NOT the 'real' IP).
4) Use that as the ID and Relay servers in Rustdesk
4a) Don't forget that you still have to forward ports (maybe), but that's covered in the docs for Rustdesk
5) Rejoice!  You now have a working connection, without a domain, or dyndns, or any of that stuff

9 hours ago, Elmojo said:

Ok, I figured it out.

Glad that you've figured it out.

 

I should have said that the server doesn't have much configuration options, instead you have to configure your clients.

Sorry it was already late yesterday and I had a long day...

It's all good.  I'm proud of myself for actually 'fixing' something. lol

Hello

for some time now the Jdownloader interface has been running quite slow in general, and when I have a lot of links in the link grabber it slows down a lot and sometimes the mouse stops responding on the interface, how can I give it more ram to make it run more smoothly?

Thank you very much.

Hi @ich777 thank you for bringing Chromium to docker container.

 

May I know how to change the VNC webGUI size? I only have page in the centre screen.

 

Thank you,

Wes

5 hours ago, Wes_S said:

May I know how to change the VNC webGUI size? I only have page in the centre screen.

 Click on the little blue Arrow Symbol on the left side of the browser, click the Gear Icon and in the drop down select Server side scaling.

6 hours ago, milfer322 said:

how can I give it more ram to make it run more smoothly?

This is the first time that I hear about that issue…

 

On what hardware do you run jDownloader2?

 

When you didn‘t limit the ammount of RAM for the container manually in the first place,it will take whatever it needs.

 

Did you change something in terms of hardware or did you up maybe change your service from your ISP to increase you download speed?

When this happens what load is on your CPU, is it maybe at 100% load?

Hi, does anyone know why MagicMirror² doesn't show up when I search in the Unraid App Store?

 

Appreciate I can probably install from DockerHub but would prefer to go the Unraid way.

 

Thanks

 

19 minutes ago, Fozzuk said:

Hi, does anyone know why MagicMirror² doesn't show up when I search in the Unraid App Store?

This app is now deprecated since I don‘t use it anymore and I don‘t maintain it anymore.

 

I think there is already a semi official container out there that you can install, or you install my container, it should still work AFAIK.

2 hours ago, ich777 said:

This app is now deprecated since I don‘t use it anymore and I don‘t maintain it anymore.

 

I think there is already a semi official container out there that you can install, or you install my container, it should still work AFAIK.

Thanks for clarifying! That’s a shame, but I completely understand and very much appreciate all the work you do on the many other apps you maintain. 

2 hours ago, Fozzuk said:

but I completely understand and very much appreciate all the work you do on the many other apps you maintain. 

Yeah, sorry about that, I have to deprecate containers which I don't use anymore since I still have about 180 Apps in the CA App IIRC...

I hope you find an alternative or still can use my container, if you really want to try it, just download the RAW template from here, rename it to my-MagicMirror2.xml and place it in /boot/config/plugins/dockerMan/templates-user/

You should then be able to go to the Docker page, on the bottom click Add Container and finally in the drop down search for MagicMirror2

@ich777
Hello,
I installed your Teamspeak 3 server on my unraid system.
Installation very easy, thank you for that.
 

Connection is possible, but when I have to paste the security key, I get an error message, that the key is not correct.
The code I am using is the 64 digit code in the installation, last row.

What I am doing wrong?

 

Please help.

7 hours ago, Bengel said:

The code I am using is the 64 digit code in the installation, last row.

The key is displayed on first installation in the log, do you mean that?

Hi, i am using your Teamspeak Docker.

 

Today i did update the Container and now i get these errors:

-Revoke list out of date

-failed to update my teamspeak id

 

 

Cant find anything to solve the problem. Any ideas ? 😀

 

5 hours ago, oldAzzBstrd said:

Today i did update the Container and now i get these errors:

What do you mean you updated the container?

I pushed no updates, the last update was pushed 19 days ago.

 

From what I see you are using TS5 correct?

 

Are you sure that this is not an issue with your TeamSpeak ID?

I don't even have any of that message in my log.

Thank you for your quick answer 😀

 

I klicked on Update (now its up to date). Its Teamspeak 3.

 

After that, all clients get the error message on connect.

Today everything is fine. No errors on connect, and the log file is also clean.

Edited October 6, 20241 yr by oldAzzBstrd

4 hours ago, oldAzzBstrd said:

Today everything is fine. No errors on connect, and the log file is also clean.

So everything is working now?

 

Maybe Teamspeak themselves had issues and that‘s why you‘ve saw the message.

On 29/9/2024 at 6:57, ich777 said:

Es la primera vez que oigo hablar de ese tema…

 

¿En qué hardware ejecuta jDownloader2?

 

Si no limitas manualmente la cantidad de RAM para el contenedor en primer lugar, tomará lo que necesite.

 

¿Cambiaste algo en términos de hardware o tal vez cambiaste el servicio de tu ISP para aumentar tu velocidad de descarga?

Cuando esto sucede, ¿qué carga tiene tu CPU? ¿Quizás está al 100 % de carga?

 

this download fast 600mbps, but the ui interface hes move slow, the cpu is not 100%

4 minutes ago, milfer322 said:

this download fast 600mbps, but the ui interface hes move slow, the cpu is not 100%

That doesn't has anything to do with RAM.

 

Are you sure your OCH is capable of delivering the speed you are trying to reach? It also depends how you set up everything...

You still haven't answered on what hardware that you run jDownloader2, I have seen such behaviour in the past with older systems because jDownloader2 is written in Java it mostly prefers single core performance over multi core performance.

This also maybe depends on other factors but I can't tell for sure what's going on.

 

Just because the CPU isn't at 100% doesn't mean that this is the cause of the issue.

 

Did you yet try the other jDownloader2 containers? Maybe they work better but I don't think so.

Hello there, 

I would like to ask how can I install custom themes from https://www.npmjs.com/package/thelounge-theme-ianon ?
I've tried with 

docker run -it --entrypoint sh -v /mnt/user/appdata/thelounge:/var/opt/thelounge ich777/thelounge:latest

 

but it gave me:

 

thelounge install thelounge-theme-ianon

 

What am I doing wrong? Any tips? Thanks!

50 minutes ago, rogales said:

What am I doing wrong? Any tips? Thanks!

It's actually a bit more involved, if you are using Unraid, click on the container icon and Console, after that issue these commands (just copy paste them) :

su $USER
export THELOUNGE_HOME="${DATA_DIR}"
thelounge install thelounge-theme-ianon

After you issued these commands you should see something like:

then you can close the terminal and you should be able to select the Theme in TheLounge.

Worked perfectly.  @ich777, Vielen Dank

Hi everyone,

 

I am experiencing some issues.
It has to do with LuckyBackup on unRAID and my Android phone.
According to what I've read online, LuckyBackup is excellent for backing up my Android phone.
But I can't make it work on my own.

 

Using the docker, ich777/luckybackup, I run LuckyBackup on unRAID.
And I want to backup my Poco X6 Pro 5G, without root.
I have already generated a SSL key for my mobile device.
Nevertheless, when I run LuckyBackup to do the backup, I keep getting numerous issues.

 

To help you understand this post better, I'll include several screenshots of my LuckyBackup setup at this moment.

 

I won't bother you with all the things I've done so far, but nothing has worked.
Could someone please assist me with this problem?

 

Thanks in advance, Rick!

9 minutes ago, rikdegraaff said:

According to what I've read online, LuckyBackup is excellent for backing up my Android phone.
But I can't make it work on my own.

honestly i dont think thats a good idea ... never saw someone recommending this

 

you would need a ssh Server running on your phone, you already have this working ? and running as service ?

with all proper priviledges ?

 

i guess your idea is somehow a pull backup while your phone is at home ...

 

there are so many backup solutions for android phones to automatically backup to network shares ... i would rather go vice vers, push from android to your NAS at home ... as sample apps like synthing, folder sync, ... nextcloud, ... whatever.

 

there you can set rules what (folders on your phone), when (at home only in wifi, always, ...) ... and so on ...