Lectoid

I just set up rclone and am using it to sync offsite. I noticed that it's reading data from the drives, but they're not showing as active. My cache drives are active, but all the data I am syncing is on the array. Edit to add: Every time I've ever browsed my files on the array, it's spun on the drive. I just noticed it's not doing that now. Not thinking it's an rclone issue, but I just started using when I noticed the drives not active, so assumed it was related.

Did you ever come up with a solution for this? I'm looking to do the same thing.

You have to add them as variables. Go in to your vaultwarden docker settings and at the bottom, click "Add another path, port, variable..." Fill out the fields like below. Repeat again for the "PUSH_INSTALLATION_KEY". Once you've done that, click apply which will restart the docker, you should see these two new fields in the logs it spits out while restarting. Then from what I've read, you'll need to delete the bitwarden app on your mobile device and re-install it and log in. You'll know the settings are in there when you can go to your vaultwarden admin page, settings, read-only config and see those two fields now have those values in them.

Thank you for this. I wasn't putting the information in the Key field and didn't know what else to do. I don't dabble much in the configs of the docker variables.

Hey Frank, my docker permissions are set like in the first link, 99, 100, and 000. The issue is it's not consistent. For example yesterday I had five folders sync down to my unRAID, two of the folders had write permission, the other three did not.

I'm having this same issue, but it's not every file every time. I have pretty much the same set up as you, but just one folder. For example last night, I had four files sync down to my unRAID box, but only one of them gave me the file permission error. The other three I could move fine. Had this issue yesterday, and a week or so ago. I've been running this same syncthing config for at least a year with no changes and never had this issue until recently.

Hello. I updated the server a few days ago by stopping it and starting it. Seemed to be fine at first, but realized my .json file was reset. Server name and password were reset. Fixed that and joined the game and all my progress was gone. Fortunately I had just started so maybe a few hours lost, but I'm worried this could happen again. I have backups enabled, but I have no idea how to restore. Are there instructions for that?

Can't get RCON to connect to my Rust server. I installed the rust docker and left everything default. Added the game parameters to enable rcon web, set the password, and also put the rcon port there just incase (default is 28017, so I left it at that). I installed Rust Admin, and also the rcon thing from the apps store. They both seem to time out when trying to connect. Docker is set to bridge mode. I tried br0 and gave it a static IP, no change. I can connect to the server from the game and play, so I know it's online. I searched in this forum for this issue, but not seen anything that matched my issue.

That worked, thank you. Never had to do that before. I have two unRAID servers and the other one updated just fine.

I was on 6.12.8, and I can't update to 6.12.10. I was able to update to 6.12.9 however. When I try to update to .10, the pop-up screen shows: plugin: installing: unRAIDServer.plg Executing hook script: pre_plugin_checks plugin: downloading: unRAIDServer.plg ... done plugin: not installing older version Executing hook script: post_plugin_checks I have tried changing my DNS to 1.1.1.1/8.8.8.8. I saw someone had a similar issue with downloading plugins.

In LuckyBackup, I changed the user to "root" instead of the "backupadmin" account I had made. Everything is working now, backups, and schedule.

I started over, even deleted and cleaned the docker up. Set it back up following the instructions from here https://unraid.net/blog/unraid-server-backups-with-luckybackup I'm still getting prompted for a password when I run the backup. Nothing I type in seems to matter.

Yea, if I run it manually, it works fine. I've added/removed files in one of my backed up folders to verify that. The drives on my destination unRAID aren't even spinning up from idle. Hmm... I just ran it manually and now it's prompting for a password. Maybe I should start over.

Hey ich, I did read that and set the console check box. Just to be clear, in the main page information window of lucky backup, when it runs via cron, should you see any indication of that? I've been looking there, but also using a few test files on my source that are not showing up on the destination.

Can anyone help me with LuckyBackup's scheduling? I set up the scheduler, but it never runs. I can run the backup manually and it works fine. I set the schedule to run and then verify it viewing the crontab.

I searched on here but not seeing what I'm looking for. Right now I just have a single USB drive that I use to backup a few folders on my array just in case. I was looking at the 2 bay RAID enclosures that places sell like the startech S352BU313R or the QNAP TR-002. Has anyone had any luck with a specific brand or model? I know on some of these it's software RAID and I think I read that the drives don't always show as one. I'm looking for ease of use and don't want to deal with "compiling my own drivers" type of situation.

Those Linux steps don't work. I tried a similar method with another mod. EDIT: Ok, it does work if I just run the "start_game_bepinex.sh" file in file explorer, but not when I add it in the launch options.

Well poop. I've been trying to get Valheim Plus added to my steam deck, but I can't find any instructions on the web. I don't play it on my laptop, but I installed it as a troubleshooting step. Thank you for the quick reply.

I have the server set up but when I try to join it, I get "Incompatible version" Logs state server is up to date. I'm trying to connect on my steam deck and from my windows laptop, both give the error. ---Server ready--- ---Starting Backup daemon--- ---Start Server--- ---with Valheim Plus--- ---Update Check for Valheim enabled, running automatically every 60 minutes.--- [S_API] SteamAPI_Init(): Loaded local 'steamclient.so' OK. CAppInfoCacheReadFromDiskThread took 1 milliseconds to initialize Setting breakpad minidump AppID = 892970 [S_API FAIL] Tried to access Steam interface SteamNetworkingUtils003 before SteamAPI_Init succeeded. UPDATE CHECK: ---Nothing to do, Valheim up-to-date---

Weird I just got notified that you "quoted" me. No I never got this resolved. I stuck my video card in a physical box and run it from there.

My mining status keeps flipping from no to yes. I got it set up and the nicehash website said it was benchmarking. Showed fan speed and temp. But now it's unavailable, but the VNC screen show's it's connected. I have an AMD video card if that matters. I restarted the unRAID server and started the VM. The nicehash website said pending and then eventually error check locally. I don't know where any logs would be to check. Just looked again and now it's going back and forth every few minutes between pending and benchmarking.

I figured it out. Another docker was using the same port. I changed the Unifi port, but that didn't work. Had to change the port on the other docker.

I just installed this docker on my unRAID server and left everything as default. When I start it I get Execution Error. If I change the network type to Host, then it does start, but I can't access the WebUI. This is all new. I just bought ubiquiti stuff, not a migration.

I figured out my issue. I was adding CPU's in the VM settings, but I wasn't running the macinabox_helper script after the changes, so the Mac VM was just kinda freezing up. All set now, thanks for the reply though.

Big Sur is hanging at the Apple logo, no loading bar, and one cpu at 100%. I followed the video very closely and after using the opencore config, removing two of the three disks (copying the path to the first one), all that. Shut it down and updated the XML with my VM name and changing firstinstall to no. I have no graphic card. Now when I boot the VM, I get the bigsur disk option and press enter. Then it just hangs at the apple logo for ever. My CPU-0 is pegged at 100%, no matter how many CPU's I assign to the VM, it's just the first one. I burned it all down and started from scratch and ended up in the same place the second time. If I need to paste my XML, let me know where exactly to get that from please.