danioj

Oooo nice feature, thank you. Quick question, can you write to it or is it read only?

There is no relation between Build/Export commands and file corruption. This might have happened due to the changes made in bunker. Did you re-apply the settings or stop/start the service? This will force the latest version of bunker to be used. Reapplying the settings didn't work so I just rebooted. Checked the Files again, no file corruption or mismatch. All working now.

bonienl, the plugin ran its scheduled check last night and I got several emails telling me that a number of static media files (.mkv's) had failed their check and were "corrupt". I don't run any software that could change these files. My issue is this, I only re-ran the check to hash these files 48hours ago. If these notifications are to be believed then that means that in the space of 24 hours I have encountered betroth on these files which are held on what is a fairly new drive too? Could I perhaps be experiencing issues because I have rebuilt and exported a few times (see above post when I thought the instruction to re-apply settings was to do a full rebuild and export) when new releases of the plugin came out recently??

Backward!!?? Easy! Nowhere can be backward that has great weather, bbq's and drive through bottle shops in my book! Even if the toilet water goes a different way! Trust me I was born and lived in the UK for 25 years and the water went clockwise. The place sucked. Anyway - your latest version fixed the issue. No clearing of browser cache or anything. Definitely a Plugin Issue (or was). Had a glance at the pending functionality for fan control. Exciting!

I don't find this. I recently set up a new install and run the script on 5 old drives on my test server. I did use the Preclear Plugin though.

Awwww. Spoil Sport. It would have been really nice to mount a protected pool outside the array!

Dude!! Lots of updates at the moment Can you please define what you mean by "re-apply settings"?? I have updated a few times recently and each time I have Remove, Build, Export. Takes a While - is this the correct procedure? Re-apply settings means on the settings page you need to press the apply button. To enable the apply button just make a change and change it back. There is no need to do any of the control commands (build, export, etc..) Bugger! LOL!! Oh well, gave the disks some exercise!! Love the new exclude options BTW. .nfo added to exclude and ticked the apple data box!! Great stuff! Thanks!!

Dude!! Lots of updates at the moment Can you please define what you mean by "re-apply settings"?? I have updated a few times recently and each time I have Remove, Build, Export. Takes a While - is this the correct procedure?

I've swung again (sat here over my coffee before I get into mid month project finance reviews) and I'm sharing RobJ's view which brings me back to this excellent plugin which of course I am currently using. So, long story short (I know - too late ) - do you think Unassigned Devices could be developed to manage a btrfs array? Would LT allow for the stripped down version (as RobJ referred to it) of the Cache Pool code to make its way into this Plugin? Just thinking out loud .... It does appear that this was asked in the previous thread here: http://lime-technology.com/forum/index.php?topic=38635.msg376126;topicseen#msg376126 The response (as I interpret it) was that if a btrfs pool is set up prior and one of the disks is mounted then the entire pool is mounted. So far it appears it is untested as this is where the discussion appeared to end.

Dan, purely academic right now but what do you think about btrfs pool managed outside the Array? For those who are thinking of jumping in and are going to point me in the direction of the Cache drive - lets just say I know about it. I started a thread in the lounge prompting a discussion as to whether I "needed" a disk managed outside the array (http://lime-technology.com/forum/index.php?topic=46811.0) and as usually the big hitters came back in fine form with some good arguments to get the thought juices going. When I went to bed last night I'd almost convinced myself that I didn't need to do this anymore (I'll let you read the posts in that thread if you're interested rather than repeat them here). Then I woke up and read RobJ's comment: I've swung again (sat here over my coffee before I get into mid month project finance reviews) and I'm sharing RobJ's view which brings me back to this excellent plugin which of course I am currently using. So, long story short (I know - too late ) - do you think Unassigned Devices could be developed to manage a btrfs array? Would LT allow for the stripped down version (as RobJ referred to it) of the Cache Pool code to make its way into this Plugin? Just thinking out loud ....

Also note that for future support posts the Unassigned Devices support thread has been moved to: https://lime-technology.com/forum/index.php?topic=45807.0

Settings>User Utilities>Unassigned Devices Under Unassigned Devices Enable "Destructive Mode" by selecting it in the drop down menu and click "Apply". Go Back to the "Main" Tab and format the drive. Remember to disable destructive mode after you're done. It was implemented as a safe guard for a reason.

Emby creates .nfo / .xml / .jpg files to store your Media METADATA. You can select a custom location for these files in Server Settings but AFAIK they are required. Note: .xml is still being used by allot of the Emby community enough for it to be continued to be supported for now BUT I believe it will be phased out as soon as the team deem it will impact on a small few. P.S. Emby is Awesome!

I'll check it out. The switch is cookie based. So it could be a problem with browser settings. I thought so too, which is why i tried it in Chrome. I don't use Chrome on my Mac's except for the odd exception web site which Safari doesn't display properly (which TBH these days is few and far between). Safari is pretty much default apart from basic changes (such as homepage etc) BUT the settings in Chrome are just default as it is hardly every used. Indeed the previous versions of the plugin worked perfectly and nothing has changed on my clients since previous versions. For kicks - just tried it on the iPad (Safari), Windows 10 VM (Edge - Default Settings), Ubuntu 15.10 VM (Firefox - Default Settings) and iPhone (Safari) too. Exactly the same in each browser.

I've noticed what appears to be a fault in the latest version of the plugin. It appears that Basic View and Advanced View Columns and data are mixed up. When Basic View is selected it shows Basic View Columns BUT Advanced View Data AND when Advanced View is selected it shows Advanced View Columns but Basic View Data. Tested in Chrome and Safari and the issue appears in both. I am running the following OS and browser versions: OS X El Capitan Version 10.11.2 Safari Version 9.0.2 (11601.3.9) Chrome Version 48.0.2564.103 (64-bit) See Screenshots:

I had this happen to me with 2 disks running simultaneous pre clears. Each disk was through cycle 2 of 3 when the power outage happened. There was no UPS. You are the 2nd reported case AFAIK. As a result of the outage I was unlucky enough to have S.M.A.R.T errors on both disks for S.M.A.R.T attribute: 187 Reported incorrect This attribute value increased and was something that will forever be recorded in the S.M.A.R.T attributes which will never go away. Thankfully I can now "acknowledge" them in unRAID so that I don't receive notifications for them constantly. Anyway, to your issue. A summary of what I was advised is recorded from the follows post within the Seagate 8TB thread onwards: http://lime-technology.com/forum/index.php?topic=36749.msg364268#msg364268 In short I just run another 3 cycles again. I don't like to skimp on disk preparation. It holds all my data after sensitive data after all. All worked out well and the two disks have been in service ever since with no other issues at all. Indeed I also run a S.M.A.R.T short test (before the pre clears) then the 3 pre clear cycles then a S.M.A.R.T long (extended) test post pre clears as this (if nothing else) puts a nice entry into the S.M.A.R.T report log with a timestamp that all is good (good advice from WeeboTech). Have a read. Good Luck!

You can't use this for that directly. Not sure what you mean by "safe". Most services (e.g. gmail, Microsoft etc) allow connections over https which means client to server the downloads are encrypted. Anyway - to do what I think you want - the easiest way is to run a vpn client on your router. To route all traffic and be truly private you will need a router with a fair bit of kick and have your configuration well and truly sorted (e.g. to prevent dns leaks etc). Alternatively - if you use a specific protocol like torrents - you can just search "vpn" in Community Applications Plugin on v6.x. Community Applications: http://lime-technology.com/forum/index.php?topic=40262.0 This plugin will allow you to easily search for and add any of the unRaid docker or plugin applications. A tab then appears on your server called "Apps" and via that tab you can search for the following: Torrent: binhex - DelugeVPN: http://lime-technology.com/forum/index.php?topic=45812.0 NZB #1: binhex-sabnzbdvpn: http://lime-technology.com/forum/index.php?topic=45822.0 NZB #2: nzbgetvpn: http://lime-technology.com/forum/index.php?topic=38930.0

This is not a VPN Client it is a VPN Server. This docker is like the IPVanish Service you are trying to connect to but your own server and connection. This is not going to mask your privacy like the VPN services you quote as any client connection you make will essentially route the connection via the ISP your server is sat behind. Unless of course your router (which manages your ISP connection) is configured to route all traffic via a VPN Service like the one you want. What are you actually trying to acheive?

Can I suggest that you put this in the first post. Not everyone scrolls down and or goes through other posts before installing.

I was just looking for some web based file management when came across a thread for (and subsequently notice in Apps) Krusader. Has this been migrated over to linuxserver.io too? Can't seem to find a linuxserver.io release for it?

I followed this procedure - as soon as I removed the old version of UD, my Docker vanished. There was no Docker tab on the main UI screen, CA told me that Docker was not enabled (I checked Docker settings, and that told me that Docker was enabled), and docker ps returned the following: root@Tower:~# docker ps Get http:///var/run/docker.sock/v1.19/containers/json: dial unix /var/run/docker.sock: no such file or directory. Are you trying to connect to a TLS-enabled daemon without TLS? After re-installing UD, I rebooted and docker came back. I would suggest that the advice that a reboot is not necessary should be taken with a great degree of caution. Interesting. Was your docker .img file hosted on one of the disks mounted outside the array or perhaps some docker config folders (although I think the latter there would only impact a container starting? If NOT then I can't see how UD impacted docker in any way!? If one of your disks mounted outside the array DID hold your docker .img the addition to the instructions would be to disable docker first IF you are going to either start your array after reboot and before you install the new version of UD OR you have your array to auto start. I'd also be backing up my docker .img file and assigning a different location first! As for the reboot (if the above is not your case) I can't see how you are EVER put in a position to be cautious over a reboot after the uninstall of a plugin. Not to mention a reboot after uninstall was advised by the Plugin notes from very early days with this plugin I believe if you HAVENT tied the operation of another function of unRAID to something running on an UD disk!

Did this procedure happen to have you uninstall a previous version of UD and install of a newer one?? UD doesn't uninstall cleanly and requires a reboot between installations to work correctly is my understanding. Either way I would recommend this. Uninstall. Reboot. Install. See if the issue is fixed?

Yes, it affects USB devices. I thought of that and was waiting for some feedback on whether or not it was important to anyone. The auto mount did cause someone some problems. Isn't a config option more convenient then just remove it for all users? It can be defaulted to "No" to avoid any problems, if necessary. Tnx FWIW I prefer to have it set the Plugin to not do anything automatically in the first instance. I only use Auto mount and once the Plugin is installed (which I have only had to do once or twice anyway) I flick a switch to Auto mount and its configured permanently from then on just the same. Don't use the scripting.

The missing quotes didn't fix it? I'm gonna rearrange some things and see. FWIW I have NO issues in Safari with this Plugin. I have checked Chrome too - and IF anything there is actually an issue there with the visibility of the "remove all" link. For me it is no issue though as I don't use Chrome. If it helps I am running: OS X El Capitan Version 10.11.2 (15C50) on an iMac (27-inch, Late 2013) Safari Version 9.0.2 (11601.3.9) Chrome Version 48.0.2564.103 (64-bit) Screen shots below: Safari Chrome Let me know if you need any help.

Moved on, i got 20 drives for free if 2 fail Meh, once i get done with the others i will re-try it. Thanks for the help. Am I reading that correctly? You signed a deal which got you 20 drives for free if two of your batch failed?