• Posts

  • Joined

  • Last visited

Everything posted by Dase

  1. I had the same problem with slowness writing big files after a while. It's usually something to do with vm.dirty_ratio & vm.dirty_background_ratio. You can adjust these with the Tips And Tweaks community application. The percentage ratio depends on how much RAM you have and your use cases. Here's an explainer for what these do: https://lonesysadmin.net/2013/12/22/better-linux-disk-caching-performance-vm-dirty_ratio/
  2. Mine gives the same 1006 error. Thanks for letting us know the UnraidServerName version of the URL works. I was able to get it in that way.
  3. Upgraded from beta30. Saw missing temps on some drives once the array came up, but doing a manual spin up restored all temps and they've worked correctly since. No issues with spinups/spindowns across three controllers and 15 drives, and no issues with my dockers or my VMs. Everything is working great. Thank you Unraid team and the community for all your work!
  4. I idle at 65 watts, but that's with two drives always spun up, a parity drive and a torrent/download drive, and 13 more on standby. I also have two drive controllers, a Dell Perc H310 and a Supermicro AOC-SASLP-MV8. Each of these draws around 10 watts on its own I've noticed. System specs: M/B: ASRockRack E3C246D4U CPU: Intel® Xeon® E-2288G CPU @ 3.70GHz Memory: 32 GiB DDR4 Single-bit ECC
  5. Those two parameters have some complicated interactions depending on the amount of memory you have. It may take some experimenting to figure out what works best for your environment. This is an older post I found, but it has good background information that may help you fine-tune things: https://lonesysadmin.net/2013/12/22/better-linux-disk-caching-performance-vm-dirty_ratio/
  6. I had similar problems. I downloaded the Tips and Tweaks community application and adjusted these settings: Disk Cache 'vm.dirty_background_ratio' (%): 1 (Default 10) Disk Cache 'vm.dirty_ratio' (%): 3 (Default 20) I have 32 GB RAM, and I found the defaults would excessively cache and then try to dump way too much data at once on large copies. With these settings the reads and writes are much more steady, though you will probably see more frequent disk activity. Read the help items for these parameters in Tips and Tweaks for more info.
  7. If it won't boot with one stick, try pulling the battery for 5 min so the CMOS can clear and try it with one stick again. After I got it to boot, I went into the CMOS and flashed the BIOS that allows hardware transcoding. After that I didn't have problems, other than having to flash the BMC separately so sensors would work.
  8. As I recall I had this problem too. I got past it by using only one stick of RAM, and then once it posted successfully I spent some time figuring out which pair of slots worked correctly. Board has been rock-solid ever since.
  9. Anybody else seeing this in their log output every 30 minutes? This started happening a few days ago. 2020-05-17 09:37:28,402 DEBG 'watchdog-script' stdout output: [warn] Incoming port site 'https://portchecker.co/check' failed to web scrape, marking as failed
  10. I stopped Docker and copied my docker.img file to a non-SSD array drive that was always spun up anyways. In Docker settings I pointed it to the new location and started Docker. All my containers started up normally and everything is working fine. Prior to doing this I was averaging over 1 GB/hr on loop2. I'm down to 140 MB/hr now. We'll see if that lower number stays down. Update: Almost 24 hours later I'm still running 140ish MB/hr.
  11. Kapton tape is ideal for this type of thing. This 1 mm tape from Amazon covers the drive's connector pins perfectly. https://www.amazon.com/gp/product/B006ROKY68
  12. I have a Norco 4220 case with a Noctua NH-D9L on my E-2288G, 110 mm height (fits in a 3U chassis). Even running all-core BOINC I haven't seen it go over 82C (ambient temp of around 65F). My system with all-core BOINC, all cores 100%, and two drives spun up is drawing 204 watts, according to my UPS. I'm really pleased with it and it was the easiest heatsink install I've done to date. https://www.amazon.com/gp/product/B00QCEWTAW
  13. Dase


    The default template I pulled from CA had /dev/dri twice. I changed it to /dev/dri and it still didn't launch. Showing advanced settings displayed the USER_ID variable, which had no value. I added 0 and everything started working. Thanks for the container! It was interesting spying on my Plex hw transcodes.
  14. I too am part of the ebay ASRockRack E3C246D4U club, thanks to Hoopster! I remember someone posting that they had to reflash the motherboard BMC because when they installed it the BMC button on the back got stuck behind the backplate and that cleared the BMC flash. Well, the same thing happened to me, and now my BIOS BMC flash is failing self-test and I can't control fan speeds. I can't find the original post about this, but does anyone have the E3C246D4U BMC flash files/utility? I submitted a support request on the ASRockRack web site, but no response yet....
  15. Have you checked out binhex-minidlna? It's simple to set up and works great for me. It's in Community Applications.
  16. My syslog is overflowing with the same btrfs error since upgrading to rc7a also. Very much looking forward to the fix.
  17. This is almost working for me now. It turns out the Pictures folder is mounted read-only, so that's why I couldn't upload new photos or make new albums. I copied some pictures there manually, but photoshow won't show any thumbnails. All I see are broken link boxes. It will show the full image if I click the eye in the expanded image view though. When I go into the settings and tell photoshow to regenerate thumbs and images, my browser loads a blank page and nothing happens. Any thoughts? This seems similar to the problems Phlii was having.
  18. I recompiled p910nd under unRAID 6.1 and added it as an attachment to my original post in this thread: http://lime-technology.com/forum/index.php?topic=2888.msg64225#msg64225 I tested it and it works fine for me with unRAID 6.1.
  19. I upgraded one of my computers to Windows 10 on 7/3 with all the latest updates and now I'm seeing these entries in my unRAID 6.0.1 log too.: Jul 6 10:37:52 Tower avahi-daemon[3446]: Invalid response packet from host There are tons of them. It would be nice if it would only log the error once....
  20. Thanks for creating this container! I have been looking forward to running a Mumble server on my unRAID box.
  21. somail, I only changed the permissions on plexWatch.pl and left the rest of the container as is. Here are the permissions I have: -rw-rw-rw- 1 99 users 608 Feb 28 09:26 config.php -rw-rw-rw- 1 99 users 12064 Apr 18 15:01 config.pl drwxrwxrwx 1 99 users 4096 Apr 21 13:16 db_backups -rw-rw-rw- 1 99 users 1356361 Apr 21 23:52 debug.log -rw-rw-rw- 1 99 users 2753536 Apr 21 23:52 plexWatch.db -rw-rw-rw- 1 99 users 207353 Apr 21 21:02 plexWatch.log -rwxrwxrwx 1 99 users 178409 Jan 22 23:37 plexWatch.pl I'm also running it with the Host network type. I can't remember what the default was.
  22. somail, that's exactly what I was seeing. Making plexWatch.pl executable in the container fixed it for me. My March 1 post in this thread has instructions if you need them.
  23. I just deleted my old image and container and reupdated from scratch too. I got the same error wickedathletes did. I looked inside the container and there is no plexReport folder in the /bin folder. I couldn't find a plexReport folder at all.
  24. Plex home is disabled as far as I can tell. I'm the only user under Settings in the Users view. The script works fine when I run it manually: docker exec -it plexReport /opt/plexReport/bin/plexReport.rb The crontab entry looks fine to me too: docker exec -it plexReport crontab -l 15 11 * * 5 /opt/plexReport/bin/plexReport.rb When I check the cron.log, cron seems to be running, for example: # cat cron.log Mar 1 06:47:01 Tower /USR/SBIN/CRON[381]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )) Mar 1 06:52:01 Tower /USR/SBIN/CRON[385]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )) Mar 1 07:17:01 Tower /USR/SBIN/CRON[388]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
  25. Thanks for helping with this. Results: find / -type d -name ".git" -ls 18930 0 drwxr-xr-x 1 root root 138 Jan 17 15:27 /opt/plexReport/.git /opt/plexReport# git log WARNING: terminal is not fully functional commit cd7bae0ea1a76f66adc42cb8debbd3e66ee36449 Author: bstascavage <brian@stascavage.com> Date: Thu Jan 8 13:50:48 2015 -0500 Fixed bug where incomplete seasons had every episdoe listed commit 56d2b35c70db8cb31d01eb44b2a97b6545f126e8 Author: bstascavage <brian@stascavage.com> Date: Mon Jan 5 11:36:49 2015 -0500 Changed thetvdb API call. Fixes #33 commit 69afc71786a54ed133bd50246c7e8402efcf5675 Merge: 32e7922 8c9eda9 Author: Brian <brian@stascavage.com> Date: Mon Dec 29 15:53:44 2014 -0500 Merge pull request #31 from bstascavage/episode-fix Added check to ensure newest episode is on the Plex. Fixes #27 commit 8c9eda9307b526e2c6c53fbff3faea5b6d419d62 Author: bstascavage <brian@stascavage.com> Date: Mon Dec 29 15:42:10 2014 -0500 Added check to ensure newest episode is on the Plex commit 32e792257e5d0bd7aabf220edf45edb9e17c3b4d Merge: 5cf4b4f 4c6d4b6 Author: bstascavage <brian@stascavage.com> Date: Mon Dec 22 14:36:25 2014 -0500