rama3124

Hi, I'm trying to set up a bash script that spends my bonus points on MAM but this script requires access to some json files that it creates to maintain an active session on MAM. Is there a way to make user scripts keep these files persistent? I also tried setting the bash script within one of my docker containers and running it on a cron job but it doesn't run so I'm guessing cron doesn't work within these containers

I've included a screenshot to show the connected slave device field on the config page. You're probably right that it isn't important, I think it's caused by the fact that the HA VM is running on the unraid server itself

I've got another problem at the moment where one of my slave devices isn't showing up on the NUT settings page. I have two slave devices, OPNsense router and Home Assistant, the latter running on a VM within my unraid server but on its own IP address. The OPNsense IP address shows up as a connected slave but the home assistant doesn't, despite the integration in HA apparently working (it shows the correct model and details for my UPS). Can this be ignored or does it mean the slave device isn't correctly connected? Happy to provide diagnostics from HA end or unraid if necessary. TIA

Hi NUT plugin has stopped working for me recently. I run unraid 7.1.0-rc3 with nut-2.8.3-x86_64-1stable.ssl31 backend. My UPS is BR1000ELCD and my SYSLOG is attached below. Here is an excerpt from the SYSLOG: ``` May 1 20:58:19 Unraid ool www[230257]: /usr/local/emhttp/plugins/nut-dw/scripts/start May 1 20:58:20 Unraid rc.nut: Writing NUT configuration... May 1 20:58:22 Unraid rc.nut: Updating permissions for NUT... May 1 20:58:22 Unraid rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... May 1 20:58:22 Unraid rc.nut: Disabling the NUT Runtime Statistics Module... May 1 20:58:23 Unraid rc.nut: Network UPS Tools upsdrvctl - UPS driver controller 2.8.3 release May 1 20:58:23 Unraid rc.nut: Network UPS Tools 2.8.3 release - Generic HID driver 0.62 May 1 20:58:23 Unraid rc.nut: USB communication driver (libusb 1.0) 0.50 May 1 20:58:24 Unraid rc.nut: No matching HID UPS found May 1 20:58:24 Unraid rc.nut: Driver failed to start (exit status=1) ``` Any help would be appreciated unraid-syslog-20250501-1051.zip

Is there a way to create an unraid notification (or some other kind of notification) if the NUT server fails to start on boot or crashes for any reason?

Ooops, i thought i did post on that thread, must have clicked the wrong link

Hi, I've recently installed the new version of the folderview plugin and all my webui icons (globe icons) have stopped working for my docker containers. I get the following popup when I click the icon and nothing happens if I press OK. If i manually navigate to the webui address for any docker container, it works fine, just the globe icon doesn't work. Anyone know how to fix this?

Hi, sorry if this question has already been answered but can I run the new Reynalds version of this plugin on unraid 7.0.0. I read above that it might crash the server so am hesitant to try installing it

Worked immediately! Thanks so much

I found part of the issue, my qbittorrent mover script wasn't working since python3 needed to be installed via plugin after update to unraid 7.0.0. There's a new problem though since mover has been running for several hours now so seems to be running super slowly. I've attached the diagnostics, can someone help me find out why it's taking so long? Thanks unraid-diagnostics-20250114-1651.zip

Hi, I run unraid 7.0.0 stable along with 2 8TB HDDs for an array (setup in BTRFS) and 3 SSDs for a cache (totalling 1gb in ZFS pool) and have been running at about 20% cache utilization for a couple of years now. As of a few days ago, my cache is hovering at around 90% usage (sometimes going higher) and triggering the mover doesn't seem to help. I ran du -sh /mnt/cache/* and it gave the following output 6.7G /mnt/cache/appdata 183G /mnt/cache/backups 524G /mnt/cache/data 20G /mnt/cache/domains 1.0K /mnt/cache/isos 3.7G /mnt/cache/nextcoud 1.0K /mnt/cache/myname 60G /mnt/cache/system Why are the data and backup folders so full despite me triggering mover? I checked and my both shares are definitely set to shift to array. Fairly new to unraid so any help would be appreciated

I just noticed that my NUT plugin isn't able to start. I've attached my SYSLOG, can anyone help me find out what's stopping it from starting? TIA Edit:it's working after stopping and starting the plugin but it would still be good to work out why it stopped so that I can prevent it from happening again unraid-syslog-20240917-2030.zip

ok thanks again, appreciate the prompt help

Fixed it, I needed to add an extra variable in the template AUTHENTIK_REDIS__DB=1 and it stopped restarting. How can i clear the logs now without restarting?

Thanks! It was the authentik-worker container, so i might post the log on the appropriate forum to see what's going on

Hi, I'm getting the following error on FCP and can't find the cause myself (I don't have NerdPack installed) /var/log is getting full (currently 54 % used) I've included my diagnostics below. Any help to remove this error would be appreciated. Thanks unraid-diagnostics-20240908-0900.zip

Hi I received this error on the Fix Common Problems plugin. Any idea what might be causing it? I've included my diagnostics below TIA unraid-diagnostics-20240908-0900.zip

I'm getting 'unknown internal server error' whenever I try and use the search function now and can't view the logs (screen just hangs). Any idea how I can troubleshoot?

Not sure what happened but it's randomly working again after restarting unraid. Thanks again for your advice

The system was running on battery when I downloaded the syslog. Could that affect the USB device? I don't think I run any specific power saving applications but I'll try moving the USB cable. Do you mean the cable for the UPS? Or the USB running unraid?

Hi, I've been running a cyber power BR700ELCD for a few months now without issues but the nut server seems to have stopped working after upgrading to unraid 7.0 beta. I've attached the syslg below, any idea what might be causing my problem? Thanks in advance unraid-syslog-20240808-2152.zip

I tried this and it fixed my SSL error with python. Thanks!

Hi I have been having SSL errors with the pip3 command after installing Unraid 7.0 beta. I tried to cd to /boot/extra and run the following command: wget https://slackware.uk/slackware/slackware64-15.0/slackware64/n/mtr-0.95-x86_64-1.txz And then rebooted unraid but I still get the error in pip3. Any idea how to fix it? Thanks