Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,870

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    That's normal, you have to format the disk after it's cleared. Disk failing to format is not normal, two of your SATA ports are set to IDE mode, that's a known problem with those AMD chipsets and that disk is using one of them, set them to AHCI/SATA and try again.
  2. JorgeB
    Replacing the disk won't fix file system issues, best bet is to check filesystem.
  3. JorgeB
    Bad RAM is the main suspect of unexpected sync errors on a server without ECC RAM, start by running memtest.
  4. JorgeB
    And those folders go directly in the media share? If yes make sure the folders don't already exist, some utilities like for example rsync or krusader create all the folders first, so they would be created on the first available disk, and then because of the split level all contents would be forced there.
  5. JorgeB
    If it boots with just the other identical 18TB it suggests tome that one has a problem.
  6. JorgeB
    Where exactly do you see that message, can you post a photo? I'm seeing a GPT issue in the log but clear which device is about.
  7. JorgeB
    No, rebuilt disk will be exactly the same as the emulated one, but once it's done you can remove it an run UFS explorer, if you want to try that.
  8. JorgeB
    OK, good, if I understood correctly disk15 was formatted, so we are assuming data there is lost?
  9. JorgeB
    Docker image is corrupt, delete and re-create.
  10. JorgeB
    Depends on how bad the disk is, and that one doesn't look very good.
  11. JorgeB
    Yep, didn't read that far before, and that's not stock Unraid or UD config.
  12. JorgeB
    A 24H memtest while not definitive will catch most issues.
  13. JorgeB
    Like mentioned the solution for that is to check the filesystem on that disk.
  14. JorgeB
    There's a single report from one user affecting a single disk, I guess you're a glass is half empty kind of guy [emoji4] Also if there really is previously undetected filesystem corruption you want it to be detected so it can be fixed, the other IMHO less likely option is that xfs is detecting false corruption, time will tell, in any case it's not an Unraid issue.
  15. JorgeB
    Reboot is not needed, just tested since I hadn't' tested with v6.11 yet.
  16. JorgeB
    hmm, it's working for me with v6.11.0
  17. JorgeB
    To recover the array yes, docker templates were stored in the flash drive, so without a backup you'll need to reconfigure them.
  18. JorgeB
    Go to Settings -> SMB -> SMB Extras and add: log level = 3 logging = syslog Then check the syslog, note that Samba will get very chatty so it can fill it up after a few hours.
  19. JorgeB
    That's not a problem, to show as an SSD you'd need to pass-through the device.
  20. JorgeB
    https://forums.unraid.net/topic/128576-intel-video-driverspassthru/?do=findComment&comment=1174726
  21. JorgeB
    Array and VMs are not difficult to recover, you might need to re-install the docker containers though. https://wiki.unraid.net/Manual/Changing_The_Flash_Device#What_to_do_if_you_have_no_backup_and_do_not_know_your_disk_assignments:
  22. JorgeB
    Most likely, do you have a backup of the flash drive?
  23. JorgeB
    See here to enable unmap/trim: https://forums.unraid.net/topic/51703-vm-faq/?do=findComment&comment=557606
  24. JorgeB
    Power off the server, power back on, what do you see? Normal post process or just that code, or initial BIOS post and that code? If you only see that try resetting the CMOS.
  25. JorgeB
    That looks like a BIOS post code, does Unraid start booting, i.e., do you see the Unraid boot menu?
×
×
  • Create New...