Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,797

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Please post the diagnostics.
  2. JorgeB
    Also keep old disk5 intact, might be your best option to recover the data, assuming it's not completely dead.
  3. JorgeB
    Yes, in the same slot, i.e., disk5, not disk6. From what I can see disk5 was formatted: Jun 23 10:25:02 Tower emhttpd: shcmd (101): mkfs.xfs -m crc=1,finobt=1 -f /dev/md5 So there won't be anything to rebuild, to confirm re-assign disk5 to disk6 slot and start the array, then post new diags.
  4. JorgeB
    Looks to me more like the server is crashing, and when there's nothing logged it's usually hardware related, make sure the correct power supply idle control is set.
  5. JorgeB
    You can if the disk is formatted by UD, then you's need to do a new config (tools -> new config) and re-sync parity, data in disks 1 and 2 would remain. Again yes if you do a new config first the re-sync parity. All existing top level folder would be shares, using the default settings.
  6. JorgeB
    Not seeing anything related logged, did the server hang or you just lost LAN connectivity?
  7. JorgeB
    When parity is installed Unraid will clear (wipe) any disk assigned to the array, if there's no parity no clearing will be done, but even in that case you'd only be able to use a disk previously formatted by Unraid or the UD plugin.
  8. JorgeB
    Post this after the issue occurs.
  9. JorgeB
    Not sure an LSI will detect optical drives, did you test with a disk? If yes first suspect would be the cables, they might be reverse breakout instead of forward breakout, also posting the diagnostics will help confirm the HBA is being initialized properly.
  10. JorgeB
    Please report back if it solves the problem.
  11. JorgeB
    There's some unallocated space and it should be enough.
  12. JorgeB
    You can use this: https://wiki.unraid.net/Manual/Changing_The_Flash_Device#What_to_do_if_you_have_no_backup_and_do_not_know_your_disk_assignments
  13. JorgeB
    That's enough if there's some unallocated space, if you want I can check if you post the diagnostics or just the output of: btrfs fi usage -T /mnt/cache
  14. JorgeB
    You should post in the Nvidia plugin support thread.
  15. JorgeB
    Though before starting you should free up some space, dangerous to run a COW filesystem so full.
  16. JorgeB
    You can use this: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=480419
  17. JorgeB
    Formatting is never part of replacing a disk, was there any data in the replaced disk? Also please post the diagnostics.
  18. JorgeB
    Any shares that have data on a single device pool will appear as unprotected, since there's no redundancy, that's normal.
  19. JorgeB
    Disk2 was added as a new disk to the array and it was cleared, that writes zeros to the disk, overwriting any data.
  20. JorgeB
    FYI this will happen if Unraid is beyond the array redundancy, e..g, if you get errors on another disk with two parity drives but have already two disabled disks Unraid has no way of continuing the rebuild, so to not corrupt the disk (if it's a previous disk that is being rebuilt on top) it just skips ahead while there are multiple disk errors, hence the speed, it's just skipping, not actually writing anything.
  21. JorgeB
    Please post current diagnostics.
  22. JorgeB
    Log is being spammed with PCIe errors, so we can't see what happened, wait for the result of the long SMART test.
  23. JorgeB
    Unrelated but your CPU is throttling due to overheating: Jun 22 15:59:52 ServRaid kernel: mce: CPU26: Core temperature is above threshold, cpu clock is throttled (total events = 78) Jun 22 16:00:00 ServRaid kernel: mce: CPU12: Core temperature is above threshold, cpu clock is throttled (total events = 78) Check/clean cooler.
  24. JorgeB
    You can leave vt-d enabled with 10.3, release has been out for many days and no more issues about that reported.
  25. JorgeB
    Best bet is to use the existing docker support thread/link:
×
×
  • Create New...