Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,588

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  2. JorgeB
    Disk looks fine, if the emulated disk is mounting and data looks correct you can rebuild on top, but should also replace that controller ASAP.
  3. JorgeB
    It is a btrfs bug, but it affects pools with an odd number of devices.
  4. JorgeB
    Possibly just a controller problem,, SASLP is not recommended for a long time, but since the disk dropped there's no SMART, power cycle the server and post new diags.
  5. JorgeB
    Update the LSI firmware to latest, CRC errors are a known issue of the version you're using.
  6. JorgeB
    It appear to be balancing still, though it should be part of the pool already, something strange is going on with that pool, probably best to just start over, system profile is still single.
  7. JorgeB
    Both layouts exist, sould be fine, assuming it's genuine, but the same goes for the first one.
  8. JorgeB
    That one is OK, make sure it's flashed to IT mode.
  9. JorgeB
    Though I guess it could be okay if you use the two ports not from the same port multiplier, but never tested that, and it can't be any two ports.
  10. JorgeB
    That is expected, once a disk gets disabled it needs to be rebuilt. The latter, if you can get one soon I'd hold off on the rebuild until then.
  11. JorgeB
    That suggests a hardware issue, one other thing you can try it to boot the server in safe mode with all docker/VMs disable, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one.
  12. JorgeB
    That's not normal, unless you're using reisefs and it was replaying the journal.
  13. JorgeB
    Boot using the GUI mode and check your network settings, if you can't find problem grab and post diagnostics.
  14. JorgeB
    That controller is just 2 ports with SATA port multipliers, you should get rid of rid or you'll have constant issues with it, see here for a list of recommended ones. Diags only show disk1 as disable, and Unraid never disables more disks than parity devices (exception is if one disk fails during the rebuild of another), reboot and post new diags.
  15. JorgeB
    Both are worth trying.
  16. JorgeB
    The usual recommendation is 24H, though in most cases if there's a problem a few hours are usually enough to find it.
  17. JorgeB
    Basically yes, I guess because it was raid0 and if the device wasn't always available during the balance there might have some leftover data, but it would be partial and incomplete data.
  18. JorgeB
    I don't see how that can be, but if you can access that data you can try to copy it elsewhere, there's no way I know of to re-add that device to the pool without deleting any data there. Yes, but the metadata is raid1, and system should be the same, you can correct that at any time.
  19. JorgeB
    From the log the NVMe device was removed form the pool (and the pool rebalanced): Feb 19 20:30:15 wahkiacusspart kernel: BTRFS info (device nvme0n1p1): device deleted: /dev/nvme0n1p1 That device now has no pool data, you want to add that device back? Also and strangely system profile is not running in raid1, only single, you should re-balance to raid1 btrfs balance start -sconvert=raid1 /mnt/cache
  20. JorgeB
    So what does this mean? Snapshots are not automatic, and for now there's no way to do it using the GUI, only manually.
  21. JorgeB
    Feb 17 21:02:41 Schirmer-NAS kernel: usb 3-4: USB disconnect, device number 3 Feb 17 21:02:41 Schirmer-NAS emhttpd: error: get_key_info, 542: No such file or directory (2): opendir: /boot/config Feb 17 21:02:41 Schirmer-NAS emhttpd: Unregistered - missing key file (ENOKEYFILE2) Feb 17 21:02:41 Schirmer-NAS kernel: usb usb3-port4: couldn't allocate usb_device Flash drive dropped, if using a USB 3.0 port try a 2.0 instead, could also be a failing drive.
  22. JorgeB
    Yes.
  23. JorgeB
    New config won't preserve any data in the emulated drive, if you don't want to rebuild that drive with a different disk first move all the data from the emulated disk to others then do the new config (you'll need to re-sync parity).
  24. JorgeB
    Try this and then post that log after a crash.
  25. JorgeB
    If you stop the plex docker does the CPU go back to normal?
×
×
  • Create New...