Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,505

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    See if you can wipe it clean with: blkdiscard /dev/nvme0n1 If command is successful try to format after that.
  2. JorgeB
    System load average is very high, but nothing on top using CPU.
  3. JorgeB
    Run make_bootable again, if that doesn't work see if it's booting on another PC, if not re-create it.
  4. JorgeB
    Does the flash drive appear on the BIOS as a boot device?
  5. JorgeB
    Zip is empty.
  6. JorgeB
    Yes, with an expander backplane you just need one HBA to access all drives.
  7. JorgeB
    Please post the full diags.
  8. JorgeB
    In that case I would go with 7 data + parity, ideally use the latest beta since it has a new alignment for SSDs that is better for performance and endurance, you should get at least 300MB/s reads for large files, possibly more.
  9. JorgeB
    What model SSDs and what performance are you expecting? Note that array devices can't be trimmed and parity should be a faster device than the others, since it will be overworked, for example I use an NVMe device for parity.
  10. JorgeB
    I don't see any format attempt on the diags posted.
  11. JorgeB
    If it happens again post new diags, that fix should be unrelated to array stopping issues.
  12. JorgeB
    Macvlan call traces are usually cause by dockers with a custom IP address, more info here, also issues with the NICs, but might be related since they start after the macvlan errors, also some out of memory errors.
  13. JorgeB
    It can rebuild two drives if you have dual parity.
  14. JorgeB
    I'm used to seeing these in several diags, so probably normal.
  15. JorgeB
    Syslog is spammed with ACPI errors, see here for the fix, then reboot and post new diags.
  16. JorgeB
    Please post the complete diags instead.
  17. JorgeB
    Correct, respect max speeds mentioned here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/?tab=comments#comment-819173
  18. JorgeB
    Maybe this?
  19. JorgeB
    Issues in multiple disks at the same time: Sep 11 02:54:30 Tower kernel: sd 9:0:7:0: Power-on or device reset occurred Sep 11 02:54:32 Tower kernel: sd 9:0:5:0: Power-on or device reset occurred Sep 11 02:54:35 Tower kernel: sd 9:0:6:0: Power-on or device reset occurred This suggest a power/cable issue, also good idea to update the LSI firmware since it's on a very old release: LSISAS2008: FWVersion(07.15.08.00) Current one is 20.00.07.00.
  20. JorgeB
    Diags are after rebooting, please post new ones after the error.
  21. JorgeB
    Download the beta zip and extract all the bz* files to the flash drive overwriting existing ones.
  22. JorgeB
    It's likely checking for trim support, WD SMR drives report they do, if that's true plugin could check if the drive is non rotational instead.
  23. JorgeB
    Spin down command Unraid uses doesn't work on SAS devices.
  24. JorgeB
    IIRC that means the NVDATA is not from LSI, older releases could still proceed and correct it, maybe p7? Check here: https://wiki.unraid.net/Crossflashing_Controllers
  25. JorgeB
    Yeah, I like AMD and just recently bough my first AMD CPU since the Athlon 64X2, but wish AMD did the same as Intel for RAM speeds, i.e. 10th gen Core CPUs support up to 2933MHz, doesn't matter if you have one or all DIMMs slots used, Ryzen 3rd gen supports "up to" 3200Mhz, most users then don't know that max speed is based on number of DIMMs/ranks used.
×
×
  • Create New...