wgstarks

The same happened to me when I first installed this plugin. It's been a while though, can't remember how I fixed it. Might try clearing your cache on your browser or reboot the server.

As a temporary work around for this you might consider using the Hosts system prefs pane on your mac. It will set the mac so that servername:6237 will resolve to IP:6237. Very simple to use. Also free.

What do you see under Workgroup settings? Maybe a screen shot.

I originally posted this problem in the WIP File Integrity Plugin thread but I noticed that the plugin is listed in this thread now so I thought it might be better to post here as well. I can't get the plugin the ignore excluded folders when running checks. I use my unRaid for TimeMachine backups but since TimeMachine will write to the backup file without modifying the date stamp this plugin detects the file as corrupted. Posts in the linked thread will show more info, but basically, I have excluded the TM shares in settings and this has no effect on the File Integrity plugin. Every time the plugin runs a check I get hundreds of warnings for corrupted files in the excluded folders. I've tried all 3 hashing methods. Even tried re-naming the share folders. Same results each time. Not sure what to try next?

See this post by Squid. It might not be what is going on with you... but it can't hurt to look into it. I have removed the dashes from the names of the user shares. Doesn't appear to have had any effect. The exported hash files all have hashes in them so looks like Blake2 is working properly. They also include hashes for excluded shares so those shares weren't really excluded. Looks like I finally got this plugin to work. Changed to MD5 and now exclusions are working. I notice that nothing is being logged though??? Maybe only errors are logged??? It would also be nice if the recycle bin could be excluded. Not really a problem, just seems like a waste. Guess I spoke too soon. The next scheduled check was yesterday and I got flooded with notifications of bad hashes in the excluded folders. Tried switching to sha2 and re-ran the check this morning with the same result. Checked the log, but this plugin doesn't log anything other than the bad hash warning. Not sure what else to try?

You're right. I closed the window just to see. Judging from the cpu activity the process is still running, but without screen I can't connect back to it.

I didn't use screen. If I close the console window (shell in a box) will I be able to re-connect just by re-opening the window?

I just started a drive defrag in console. Just out of curiosity, how do I know when the process is complete? I can tell it's running from the jump in cpu activity but that's about it.

Not sure if it'll help in this case, but you might take a look at Open Files Plugin. It'll show you which processes are still running after you try to shutdown.

See this post by Squid. It might not be what is going on with you... but it can't hurt to look into it. I have removed the dashes from the names of the user shares. Doesn't appear to have had any effect. The exported hash files all have hashes in them so looks like Blake2 is working properly. They also include hashes for excluded shares so those shares weren't really excluded. Looks like I finally got this plugin to work. Changed to MD5 and now exclusions are working. I notice that nothing is being logged though??? Maybe only errors are logged??? It would also be nice if the recycle bin could be excluded. Not really a problem, just seems like a waste.

See this post by Squid. It might not be what is going on with you... but it can't hurt to look into it. I have removed the dashes from the names of the user shares. Doesn't appear to have had any effect. The exported hash files all have hashes in them so looks like Blake2 is working properly. They also include hashes for excluded shares so those shares weren't really excluded.

I would just need to replace /checksum/ with /fileintegrity/ right? Might have remembered the exact syntax wrong. Regardless, could I still just look at one of the exported hash files?

See this post by Squid. It might not be what is going on with you... but it can't hurt to look into it. Thanks. I'll run the command to test later.

I would think that it is, but I can't find any info one way or the other. Guess I can try one of the other methods just to test.

I've tried everything I can think of. Tried deleting the exported hashes. Removing the hashes. Even in-installed and deleted the plugin from flash. After I re-install, the plugin still scans the excluded shares. The exclusions are listed on the settings pages and the .ini file. Evidently the exclusions setting isn't working.

How did you exclude the .xfs directory in File Integrity? The only exclusion options I have to select from is my user shares. Don't see how to manually enter an exclusion.

When I first installed this plugin I had it check all files (nothing excluded). The TimeMachine backups were a problem though. Any modified files would generate a warning. Because of this I added all the TM backups to excluded shares in settings. I still get warnings when this plugin runs though. Example- Event: unRAID file corruption Subject: Notice [bRUNNHILDE] - bunker command Description: Found 839 files with BLAKE2 hash key mismatch Importance: warning BLAKE2 hash key mismatch (updated), /mnt/disk9/TM-Jasper/Jasper.sparsebundle/bands/114b was modified BLAKE2 hash key mismatch (updated), /mnt/disk9/TM-Jasper/Jasper.sparsebundle/bands/1158 was modified BLAKE2 hash key mismatch (updated), /mnt/disk9/TM-Jasper/Jasper.sparsebundle/bands/1162 was modified TM-Jasper is excluded. I've double checked that in settings. How do I get it to stop checking those files?

Assuming you have re-named both files correctly then it's likely that you'll get an option to overwrite. You should check the file after you transfer it to flash though IMO. There are some protocols that will change file names on duplicates rather than overwriting.

Won't get any argument from me.

This problem is only related indirectly, but not sure where else to seek advice. When I run a check of my TimeMachine backups I get hundreds of checksum errors. I've read that this problem is caused by TimeMachine modifying the files without changing the modification date, so I understand why I'm getting the warnings. Not sure how I can correct this? Is my only option to just exclude my TM backups? These are the primary files that I wanted to protect. It's pointless to just leave my settings the way they are though. I wouldn't know if a TM file had actually been corrupted and with hundreds of corrupted files being listed I could easily miss other non TM files that might be reported. Any recommendations welcome.

For me it broke two other plugins but both were fixed by uninstalling them and then reinstalling. They were the Dynamix SSD Trim plugin, which disappeared from the Settings - Scheduler page, and the Dynamix Local Master plugin, which added the following error message to the syslog every minute: Jan 23 20:08:01 Lapulapu crond[1493]: exit status 127 from user root /usr/local/emhttp/plugins/dynamix/scripts/localmaster &> /dev/null Jan 23 20:09:01 Lapulapu crond[1493]: exit status 127 from user root /usr/local/emhttp/plugins/dynamix/scripts/localmaster &> /dev/null Jan 23 20:10:01 Lapulapu crond[1493]: exit status 127 from user root /usr/local/emhttp/plugins/dynamix/scripts/localmaster &> /dev/null Thanks for the headsup. Don't have an SSD but had to re-install Local Master.

This would be great. Never been able to get fan control to work. Always had to just set them to high speed. Would be really nice if I could get them to reduce speed automatically when it's not needed.

Where at? I've looked in the Stats settings & Disk Settings and I do not see the thresholds.

Only this line indicates an exception, the file wasn't exported because no checksum value is present in the extended attributes. Rerun Build for disk 1 to solve. The kernel messages are not related. Thanks. Started it again. Not sure what to think of this-- That's a little over 10 years. Seems a little long? Edit: Sorry. Should have waited a little longer before posting. Took it about 20 minutes or so but looks like it's moving. The ETA has dropped to 11:41:42.

I just installed this plugin. I think I've got everything set correctly, but when I try to "Build" I get the following error- Jan 18 18:08:24 Brunnhilde bunker: error: no export of file: /mnt/disk1/TM-Mini/HT-Mini.sparsebundle/com.apple.TimeMachine.SnapshotHistory.plist Jan 18 18:08:24 Brunnhilde bunker: exported 3 files from /mnt/disk1 with mask *. Duration: 00:00:00 Jan 18 18:15:59 Brunnhilde kernel: ata2.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x280100 action 0x6 frozen Jan 18 18:15:59 Brunnhilde kernel: ata2.00: irq_stat 0x08000000, interface fatal error