steve1977

It used to work well, but now docker services seem to have disappeared? Not sure related to the recent update or anything else? It also says that no virtual machine has been installed? Attaching a diagnostic log for troubleshooting. Thanks for your help!!! tower-diagnostics-20221217-1736.zip

Did you find a solution? I seem to have the same permission issue with Radarr.

It seems to be working for others then? Let me file a bug report. Maybe you can add to it to get developer attention?

Any update whether this docker container is working again?

Thanks for your help. Unfortunately, this did not work for me. I copied the files and made above change to the XML. The screen resolution seems off and there is an error message about non-bootable device. Any further advice appreciated!

Thanks for your helpful response. Unfortunately, Fifa 23 indeed needs this to be set as secure. Internet is all over complaining about this requirement Where would I need to copy the file to? Let me give it a try and see whether this would make Fifa work. In general I don't like messing with the VM XML file as this often leads to trouble later. For example when I change the RAM allocation later, this will override this change and I will likely forget how to make this manual change again.

This reads fairly complicated, but I think I need to find a way to enable it to play Fifa 23? Will there be an Unraid update to support this natively?

My flash disk corrupted and I had to change it. Now, all is running again well. One odd thing: the "edit" option is no longer available for most docker containers. Any ideas why?

I did recreate, but now stuck with my GUID being blacklisted 😞 I have reached out to Unraid support.

Thanks, how to recreate?

Docker stopped working asking me to post diagnostic. Any thoughts? tower-diagnostics-20221105-2324.zip

I have two Windows VMs. I can access the Unraid Array from one of them via SMB. Unfortunately, I cannot do this from the other one (getting error message that not accessible). Assume this may be a Windows issue? Is there some way to wipe the network setting to give it a fresh start?

Maybe easier to first try whether I can get the config right. Shouldn't be so difficult. Basically just need to remember the bios type / number, which I can try various options. Rest should be quite clear. After deleting the libvirt file, do I need to recreate it or does this happen automatically?

Thanks. Where are the XML stored?

How to uncorrupt it? I deleted the docker file as suggested per the link. So, docker containers are working again. But VM remains non-corrupting. Could also be because I may have done something wrong in the VM settings though.

Thanks. Docker indeed went smoothly. Struggling to remember how I had the VMs setup 😞 Started with one of the 3 VMs. Getting the following error: "VM creation error: cannot open directory '/etc/libvirt/hooks/qemu.d': input/output error. Any idea what could be causing this and how to solve?

Thanks for your quick note. I don't think I have a backup of the libvirt.img. That's needed for reinstalling the VMs? Any other way to recreate my VMs?

No clue what happened, but Docker and VM tab are now empty. Attaching log for troubleshooting. Thanks for your help! tower-diagnostics-20220922-2314.zip

Seeing above error in the Unraid GUI. Diagnostic attached. Thanks! tower-diagnostics-20220904-1410.zip

I do believe there are some docker, for which I have permission issues. Newly installed and the files cannot be accessed via SMB. Also, specifically the sabnzbd-extended docker places files with wrong permission in the download folder. Any thoughts appreciated!!! tower-diagnostics-20220706-1756.zip

Have been trying this again after a while. Still no luck. Error log below. Any thoughts appreciated! ttempting to connect to local OpenRGB server. Connection attempt failed Local OpenRGB server unavailable. Running standalone. Network connection thread started on port 6742 <h2>WARNING:</h2><p>One or more I2C/SMBus interfaces failed to initialize.</p><p>RGB DRAM modules and some motherboards' onboard RGB lighting will not be available without I2C/SMBus.</p><p>On Linux, this is usually because the i2c-dev module is not loaded. You must load the i2c-dev module along with the correct i2c driver for your motherboard. This is usually i2c-piix4 for AMD systems and i2c-i801 for Intel systems.</p><p>See <a href='https://help.openrgb.org/'>help.openrgb.org</a> for additional troubleshooting steps if you keep seeing this message.<br></p> Profile failed to load

Did you ever try this? Do you know which usb controller to passthrough to make this work?

When I go to https://forums.unraid.net/my-servers/, it says that my server is online ("green") and also remote access is "green". However, when I test port 443 in myserver settings, I am receiving the error message that the server is unreachable. I forwarded my port 443 in my router settings. I am attaching a diagnostic lot for troubleshooting. Thanks!!! tower-diagnostics-20220529-2005.zip

Yes, working now. You fixed something for my account in the backend?

Thanks. Please see below: <-----UNRAID-API-REPORT-----> SERVER_NAME: Tower ENVIRONMENT: production UNRAID_VERSION: 6.10.0 UNRAID_API_VERSION: 2.46.3 (running) NODE_VERSION: v14.15.3 API_KEY: valid MY_SERVERS: authenticated MY_SERVERS_USERNAME: steve1977 RELAY: connected MOTHERSHIP: ok ONLINE_SERVERS: Tower OFFLINE_SERVERS: HAS_CRASH_LOGS: no </----UNRAID-API-REPORT----->