JWMutant

I will give it a go when I get home from work. Thanks for the help in advance.

Hello all, I seem to have a problem that has started to appear. The GUI will randomly become nonresponsive no matter what computer I try to access it from. So, I have no choice but to do a hard reset. When it comes back online, I find that the docker is set to off. Can anyone point me in the right direction? Cheers tower-diagnostics-20230927-1614.zip

Cool thanks for the info

Thanks for the reply. So if I go root@Tower:~# free -m total used free shared buff/cache available Mem: 48139 13029 1264 1619 33846 32936 Swap: 0 0 0 Thats ok. Just out of interest what goes into the cache?

Sorry if Im posting in the wrong forum. Im not sure if my total memory usage looks odd or not. I have a total of 48GiB installed. I have 1 VM that has 8GiB assigned to it. But my memory usage seems to be a little high. I do have 16 dockers running but when I look at the advanced view in dockers they dont seem to be using that much memory.

Below is what I see at work, when I have remote access enabled using upnp.

Just having a look it appears I dont have remote access enabled. Ill enable it and see how it goes when Im at work. Cheers

Sounds about right. Thanks for letting me know. Ill take a screen shot at work tomorrow and post it here so at the very least you can see what I mean. Regards

Sorry no I dont mean the layout. At home I can see everything in the picture above. At work I can see the left hand bar, but I dont have the same functionality. At work when I click server management it gives me 1 box with some server info but I dont get any functionality.

First let me say, TOP job on the unraid connect. Its a great addition and is so handy. Just one question. The live view when you click manage. Is this live view dependent on being viewable in the state below if you have a certain chrome extension running? I only ask being my work computer hasnt got this site blocked (Thank god) but I dont get the same view at work. Im thinking that work admin has some extensions blocked.

Ever since 6.12 I have found that when I do a manual check for any updates it just says checking.... endlessly. Is there a fix for this just out of interest? Regards

When I do a fresh docker install this is what the path info looks like for the books, this is default info and nothing has been changed by me. The name info doesnt look correct, but thats how it looks out of the box. However Just to be on the safe side I change it to what yours looks like. And then when I press save the below happens.

Hello all, Does anyone have issues setting the library once the dockers is running. When im in the GUI I set the location and once i click save it keeps saying "DB Location is not Valid, Please Enter Correct Path"

Does anyone know if this docker is no longer supported?

Same with me.

Thanks very much for the info. I have re-formatted the cache drive and can remove all is normal again.

Hi I have an issue that has just popped up. Fix common problems is reporting "Unable to write to cache" On my Monitor it is saying " BTRFS: error (device sdb1) in btrfs_run_delayed_refs:2150: errno=-5 IO failure. Not sure what to do. I have rebooted and get the same issue. I have put the cache driver in another SATA port but still have the issue. Docker tab reports "Docker Service failed to start." If someone could point me in the right direction I would be much grateful, my tower is like a fish out of water at the moment. Regards tower-diagnostics-20220827-0831.zip

Thanks for the heads up, I thought that may be the case. But rebuilding the parity aside, my plan should work yes?

I have a question in regards a new config. I currently have a 6TB drive on disk 2 which I need to use for another project. I had a smaller driver that I wasnt using so was going to replace disk 2 from a 6TB to a 4TB driver. As we know this will not work as you cant go smaller. So the idea I have is temporarily add the 4TB drive to the array and copy everything from disk 2 to disk 8. So now my question is if I create a new config and start by reducing the drives used by one and then remove the 6TB and assign the 4TB to disk 2 the server shouldnt know any different? Yes? I will point out that I want to assign the 4TB to disk 2 because I have alot of dockers that point to disk 2 and I think this is easier that reconfigure every docker. Regards

That worked perfectly. Thanks very much. When I first tried it I thought I may have gotten the command wrong so I did mkfs.xfs -m crc=1,finobt=1 -f /dev/sdg as that is at the end of the description on that drive. It did it thing ok and didnt give me any errors, obviously it didnt work, however what damage if any would I have done by using sdg instead of the correct command? Regards

Good news is I didn't get any errors this time. So thanks very much for that. The down side is the size used didn't change. 41.9GB for a 8TB drive before and 41.9GB after I followed the instructions.

Thanks very much, I’ll give it a go when I get home. Cheers

Sorry to dig up an old post but does "mkfs.xfs -m crc=1,finobt=1 -f /dev/mdX" still work? I used it once before with no problems but went to use it again with the following command : mkfs.xfs -m crc=1,finobt=1 -f /dev/mdg G being the disk # and it came back with an error Error accessing specified device /dev/mdg. Or should I be using the actual driver number as in /dev/md7. Been a long time since I used this command so I can remember. Regards

Afternoon all, I stupidly pressed "Renew" in management Access, Now its saying " DNS Propagation is PENDING". Its been saying that for a while. Is there something wrong or is this just a sit and wait thing. Was working fine prior to me pressing renew. Regards tower-diagnostics-20220520-1557.zip

Im not sure if this relates to the few posts above me but all of a sudden Radarr is spitting out the attached error. Can someone please provide a little bit of help. Regards New Text Document.txt