takkkkkkk

Tried running on VM, still maxes at 30MB. starting to think it's something to do with how unraid handles WAN.

were you able to find solution for this?? having exactly the same issue

Good to know that I'm not alone in this.... May actually give it a try in VM, but if I run Sab within VM, how do I connect it to RADARR / SONARR Docker container?

I've been trying to figure out why I'm getting slow usenet connections and I've been trying various ways to get more bandwidth. I have a gigabit fiber, and from wired PC (ethernet), I get various speedtest results, but never below 700mbps (speed test shows 850mb/s, but I'm assuming that's overinflated) The server (also wired), when I run speedtest under setting, I get ~500mb/s, I don't know why I'm seeing a drop of 300mbps vs. speed test from my PC... OpenSpeedTest-Server-For-LAN-WiFI-HTML5-Network-Speed-Test, shows 1gb/s connection. Usenet transfers hovers around 30MB/s speed, regardless of server setting and I cannot find out why. File transfers between PC and unraid goes ~100MB/s, so I'm assuming it's not caused by network or wires. I have 3 usenet providers (1 US, 2 NL), and here are couple of things I tried: 1. SABNZB - no VPN, US server priority 0, , rest priority 1- 10 connections, SSL - max 30MB 1. SABNZB - no VPN, only US server priority 0 ,15 connections, SSL - max 30MB 2. SABNZB - No VPN, all server priority 0, 10 connections, SSL - max 30 mb 3. SABNZB + nzbget - No VPN, USserver priority 0, rest priority 1 - 5 connections / container, SSL - max 30MB combined 4. SABNZB + nzbget - No VPN, USserver priority 0, rest priority 1 - 10 connections / container, SSL - max 30MB combined 5. SABNZB + nzbget - No VPN, disabled US server in SABNZB priority 0, rest priority 0-1 - 10 connections / container, SSL - max 30MB combined 6. nzbget - No VPN, all server priority 0, 10 connections, SSL - max 30 mb What's interesting is that speedtest ran on one of the Windows VM (remote desktop) resulted in 400mb/s, so even slower than unraid speedtest... I've also played around with the priority settings here and there.... So I'm confused... Based on speed test on my PC, it seems like I have semi/solid WAN of ~700mb/s Based on file transfers between PC and unraid, I think cache drive drive speed are fine, and getting 1gb/s Based on speed test on unraid, I have ~500mb/s Based on various testing, the entire nzb group seems to be getting ~30MB/s (240mb/s?) What could be the culprit in this whole thing? am I wrong to assume having additional server would help increase the speed? Why wouldn't it max out my bandwidth? Or at least close to what unraid speed test is saying?

as always you guys enlighten me, if usenet providers are logging the network activities, it doesn't matter where the connection is coming from. they could triage using the username... I guess that's it from usenet's vpn.

I just tried for a sec to remove vpn, and I got 60MB/s... Quickly turned it back on, and I'm back to 10-20mB/s... What am I risking if I turn off VPN :)?

Same, tried Israel too, but it's the same

Hi there, yesterday, I installed NextCloud and then SWAG, nextcloud was working fine from LAN, but now that I have SWAG set up, Nextcloud only works over external network on my cell (https://nextcloud.mydomain.com), if I'm connected to wifi it wouldn't work. When I'm on LAN, whether I try [local ip]:444 or https://nextcloud.mydomain.com, I can't access Nextcloud... I read it somewhere about nat loopack, but my router that I got from fiber ips doesn't have the option... could you point me into what are my alternative? found it weird that I can't even access via [local ip]:444...

is it just me or PIA has really slowed down? I used to get 30MB~50MB (I have 1Gb/s internet), now I'm getting 5MB/s~10MB/s

Anyone having issue with Pia?

care to give me top ones?

Ok, I'm confused, I tried searching for the answer, but I can't seem to find it... Why not just use duckdns/openvpn?? What's so great about wireguard?

Is it just me or the development seems to have slowed down?

No, even when it's converted, the HDR contents looks like it has white transparency sheet...

Thanks for your input, I was going to do the same, but the only catch is many of 2160 movies have HDR, and based on my understanding plex doesn't de-HDR. That's why I'm going with two video file route...

Thanks I created a separate folder for 2160 and 1080

ok, now I'm having a different issue... I now have two instances of radarr, one radarr has a profile of 1080 and another radarr has profile of 2160. In the 2160 radarr, I added same media folder as 1080. But now I'm seeing a weird thing, as an example, a month ago, 1080 radarr downloaded a movie.today 2160 radarr found the same movie in 2160, and downloaded the movie, it then deleted 1080 movie file in the media folder, and replaced with 2160. when I go to 1080 radarr, it says the media was downloaded... do I actually have to separate everything??

would I pick the same /data location? if so, how would main radarr or 4k radarr know which one is which? do I have to set up different category?

Hi Team, I'm trying to have 2 instances of RADARR, one main, and one for 4k. Ideally I would like to have the same movies (if I add to the main radarr, it would add to 4k as well) Are there any tutorials of how I can get this done?

I really hope it's the true remote/offsite management. I hate having to turnon VM on my work machine, just so that I can use openvpn to remotely manage unraid

I kinda wished limetech put some devil theme to this build

after the issue with 6.6.4, I'm worried about installing it so soon, how long should I wait before it's safe?

weird question and I don't know if this issue is caused by sabnzbd or sonarr, but I'm having a weird issue where sonarr moves recognizes some of the shows and moves after completion, but it doesn't always work. Have you guys encountered this issue?

Anyone found solution to PEXUSB3S44V on windows 10 VM? I'm having the same issue and throws code 10 error

Thanks how can I set STRICT_PORT_FORWARD to yes? I don't see that in the option