fatalfurry

Members
  • Posts

    56
  • Joined

  • Last visited

Everything posted by fatalfurry

  1. JorgeB, Thanks for looking into this. After upgrading and disabling things are looking better. I was able to recreate my array and have had no errors with 10.3.
  2. This morning I woke up to an alert that my server saying that 11 out of 11 of my drives had errors. I quick rand a diag and turned it off, until I could work on it later tonight. Looking through the longs I'm not sure if this is part of the VT-D kernel bug but i did have it turned on. Any help would be great. tidehunter-diagnostics-20220613-0749.zip
  3. @JorgeB thanks for that. I was able to restore my drives to the correct order and the server back up and running.
  4. To document a bit more. This is what my array currently looks like. Should try to assign my drives back into the exact same places? What should I do to not lose data?
  5. I rebooted my server and all of my drives are unassigned and unraid is telling me I have a stale configuration. I've attached my diagnostics if anyone could take a look that would be great. tidehunter-diagnostics-20201210-1126.zip
  6. Did the fonts change? Everything looks really nice or I'm blind... either way great job team.
  7. I was able to boot after going into my bios and disabling C-States. I've been stable for almost a year with C-States set to Auto and I don't understand how these items could be related.
  8. I'm getting this same error and unable to boot after upgrading. I went from 6.8.0 to 6.8.1. I've tried both the normal boot and safe mode.
  9. I love that I can host my docker apps and vms on my file server and now case badges. Well sign me up.
  10. Thank you everyone for your input. I've taken jonathanm's advice on assigning all of my disks as they were previously including the correct drives for parity 1 and parity 2. At first glance everything is looking good and I'm running a parity check. Looking into UPSs I've realized I don't know enough about the nuances. Are there any recommendations on a UPS that can be rack mounted?
  11. I am purchasing a UPS this week. This was always something on my list, but never got around to. I found an old diagnostics that has all of my drives listed in the vars.txt file. tidehunter-diagnostics-20181206-1608.zip I can map out all of the disks in their correct positions, but how do I set them up to not format and clear the data?
  12. I had multiple power outages today due to bad weather. this caused my unraid server to do an unclean shutdown. After booting it back up my array devices are unassigned. What should be my first steps on restoring my array? (Diagnostics attached) tidehunter-diagnostics-20190720-1652.zip
  13. I wanted to follow up on this. I replace my board with X399 DESIGNARE EX rev 1. and the HBA cards are working.
  14. I returning my Asrock x399 taichi motherboard as it has issues with my HBA cards (BAD DLLP ). What motherboard is currently recommended that will work with ECC memory and Dell Perc H310 HBA cards?
  15. Adding pci=nommconfto to syslinux.cfg did not work. Do you think this is specific to my current board or all versions of the Taichi x399?
  16. I'm on the latest bios for my Asrock Taichi x399. I tried moving the PCI devices around but I keep getting these errors.
  17. I rebooted my server this afternoon and a few drives are no longer seen. I also see many errors in the SYS log about Bad DLLP. I've turned the server off in the mean time until I know what to do moving forward. tower-diagnostics-20181218-1722.zip
  18. Over the past week I've slowly been upgrading my system from an old i5 to a Threadripper x1950 in a new Norco 4224 case. Old server i5 3570 16 GB ram 1x Dell Perc H310 flashed IT mode. New Server Threadripper x1950 Asrock Taichi x399 16 GB ECC Ram 2x Dell Perc H310 flashed in IT mode. The system was running fine in the new server until today when I started to build a new VM and received disk read errors. One of the disks are disable and it is running a parity check finding 100k in errors so far and it's only 2% complete. Attached is my diagnostic I'm hoping someone has insights into what has happened. tidehunter-diagnostics-20181206-1608.zip
  19. At first I used the batch files and after they didn't work. I ran the commands manually. To give an update on my issue. I ended up getting everything working. I recreated the USB boot disk and used another PC. This combination worked right away and has worked all weekend.
  20. Doing more research looks like fulcrum77 had the same issue back in April. I follow the same directions finding Sas2flsh P14 and trying to flash any of the three firmware (Dell, P7, P20) and nothing has been working. I still see a light blinking on the HBA so I'm thinking there's still a chance.
  21. I'm not sure if I've bricked my Dell H310 Going through the process I've gotten to step 3 and received an error code 64. I continued to the next step and tried to flash the dell firmware but that also threw an error. I've tried going through all of the steps again and nothing seems to be working. I've tried two computers and using BIOS and UEFI scripts. All of which are return the same results above. What can i do going forward? Do you think I've bricked my HBA?
  22. Changed Status to Open Changed Priority to Annoyance
  23. I had moved my VM from using a video card to VNC and it defaulted the VNC keyboard to Arabic (ar). Can the default keyboard be configured in settings > vm?