NewDisplayName

hmm I have same problem like last time, but even worser. auto fan control cant find any PWM controller, i upgraded my server to the following board: Z170 PRO GAMING Version Any idea? root@Unraid-Server:~# pwmconfig # pwmconfig revision $Revision$ ($Date$) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

Just as a hint 8x or 16x doenst make a noticable difference for GPU.

No, i dont mean that cache plugin is the problem, i just mean it should prevent that (because it caches directorys) but sometime its not good enaught (i dont know). I had spinning up drives just from visiting and browser around on my client where links to the server were visisible - that was my hint. Like i had "Server" in my start menu (a link to //192.168..../some/thing/) which spun different drives up At the end you can spot this issues with the open files plugins avaible (try different) (i saw acccesses to the directorys, so i knew it was the links)

some pages ago someone posted something about encoders for plex... what is the benefit of it? Does it enable to use something you normally only get when buying plex pass?

Im not him, but i try to help. I guess it was just running out of RAM. Lowering the buffer is a good idea. Maybe even more, test it out until it starts buffering while watching. 4 gb is very low ram. (i also startet with 4gb, now im at 32). As a tip for lower ram consumption, many dockers have "ram leaks" and use more and more ram longer they run... i use ca auto backup to restart the dockers every day. So that fixes this problem. I dont know why mountcheck makes a problem, but you renamed all the check for the file to mountcheck2 so this should be np. If upload is working, youll be fine.

Sorry for wasting your time, im just stupid. Thanks for your help. Just btw, since you created this post i uploaded all +1 year old files with only 10mbits UL

nvm, i fixed it, there were srsly a file in mount rclone UPLOAD... which caused this (i didnt looked there, because i dont use that directory)

I dont want to break anything, and unmounting is only working when restarting...

I posted you the output from me tryin to manually remov eit edit: i think you mean via smb? I cant see the directory in mount rclone, in mount unionfs i found it and deleted it, still same output from cleanscript

I cant fix that undeleteable file problem. 18.04.2019 04:40:01 INFO: starting unionfs cleanup. rm: cannot remove '/mnt/user/mount_rclone/google_vfs/Filme/1922 (2017)/1922 (2017).mkv': No such file or directory rm: cannot remove '/mnt/user/rclone_upload/google_vfs/Filme/1922 (2017)/1922 (2017).mkv': No such file or directory rm: cannot remove '/mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922 (2017)/1922 (2017).mkv_HIDDEN~': Permission denied root@Unraid-Server:~# rm -r /mnt/user/mount_rclone/google_vfs/Filme/1922 (2017)/1922 (2017).mkv -bash: syntax error near unexpected token `(' root@Unraid-Server:~# rm -r /mnt/user/mount_rclone/google_vfs/Filme/1922\ \(2017\)/ root@Unraid-Server:~# rm -r /mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922\ \(2017\)/ rm: cannot remove '/mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922 (2017)/1922 (2017).mkv_HIDDEN~': Permission denied root@Unraid-Server:~# rm -r /mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922\ \(2017\)/1922\ \(2017\).mkv_HIDDEN~ rm: cannot remove '/mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922 (2017)/1922 (2017).mkv_HIDDEN~': Permission denied root@Unraid-Server:~# chmod 777 /mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922\ \(2017\)/1922\ \(2017\).mkv_HIDDEN~ chmod: changing permissions of '/mnt/user/mount_unionfs/google_vfs/.unionfs/Filme/1922 (2017)/1922 (2017).mkv_HIDDEN~': Permission denied any idea?

Yeah ok, i just thought bc of that "saved files" folder. Where i can see which files are bad?

So, this plugins shows some errors for some files. What are next steps? Can that plugin restore these files? Where i can see which files are wrong? I just got a red notice about some file were corrupt.

mount fs makes the directorys and files work just like normal local files and directories (when its setup correctly)

We now magically know whats the problem?! U didnt asked ANY questions. Or told us WHERE ure stuck. Maybe youre looking in the wrong directory. Besides that, were supporting here the tutorial on the first page, do it step after step and if you have problems ask specific things so we can help you.

And i would just use -c=512 With -c= you can specify how much CPU power a docker uses at max, when the power is needed somewhere else. So you could set handbrake to -c=128 and it can run all day, if your server has extra power avaible, it uses it, if not, then its very slow. No need to start or stop, it just plain works. 100% is 1024 (which is standard btw) 50% would be 512... you get the idea. I had same problem and that was the easiest and cleanest solution.

Ur decicion, its working flawless for me and others since months... initial setup is a bitch, but when it works, it works. Getting my own client id, sped everything up, but it was okay even before.

Crazy. Thanks. But i wonder how to use? I cant find any new buttons or anything under scheduler? (liek for temps) I just need fans for my hdds because of parity check, so thats again like 10 watt less power draw (and not so loud). So this would be usefull. Or do i need to wait till i see the update? But the donate button is there, so its the newest version, right!?

Its always the same error, there are hidden things inside the scripts on the first page and or on github. I dont know how, but it should be removed or we get these questions over and over again

Yes, thats correct. You can adjust the workers (threads) to speed it up, if u have spare cpu.

If im correct it uses the "created" date. (if i download old linux movies then they get uplaoded even if i set to 1y) I wouldnt bother uploading such fresh data.

What do you mean? If you set the script to max age 2 then it will upload files older then 2 days.