PSYCHOPATHiO

@FoxxMD I Got my second SDR today & its already connected to ShinySDR, I'm not so sure I configured it right! I got it all up & running but all I have is the simulated RF. I think I need to dig a little deeper & look around till I find my solution.

i have multiple Vlans setup through pfSense & L2 Switch: LAN 10.0.0.0/24 Network SLAN 10.0.1.0/24 Servers & Dockers Network (Services Network) VPLAN1 10.0.3.0/24 VPN Network 1 (pfsense has already got an openvpn connection setup for remote network access, this is for email relay & other network requirements) Unraid can be accessed on 10.0.0.4, 10.0.1.4, 10.0.3,4 port 443 NPM docker wont start on ports 443 & 80 as it conflicts with unraid when bridged, unless I missing something. When I moved unraid to a different port & set NPM to 443 & 80 it started them came the forwarding & bad gateways, I could probably make it work but I'd rather not have to mess up my DNS & network to make it work. The issue is pfsense forwarding internal dns request to NPM is I think on port 443 & 80 only so whenever I have e.g plex.xxx.com ip 10.0.0.10:32400 pointed to NPM it just displays a blank page. EDIT: I need NPM to listen to 443, 80 on its designated IP on its VLAN

That worked in a way, but I ended up getting Bad Gateway errors on more than half the hosts with limited internal & external access only to some of the hosts on port 443 for some reason.I tried changing the NAT type (pure or proxy & messed with NAT reflection) but that didnt help (I'm using a physical pfsense.) To bridge the docker I had to remove my unraid from port 443 & change lots of things on the network, its not worth the change, I will keep NPM pointing at 8080 & 4443 as I have already configured everything to work correctly.

I have been trying to do this for over 3 days but nothing seems to work, even tried manually editing files in the config but it wont work on ports 80 & 443, changing the docker variables does nothing.

I started fiddling with your Shiny SDR looooooool, but I was only testing. I will get back to it once I get the second SDR. I'm also fabricating some antennas & keeping my self busy. I would love to have @ShoGinn VRS Docker on unraid, it would be a nice addition to the long list of dockers available.

This is getting out of control looooooool I just got a second SDR & FlightAware 1090 MHz ADS-B Antenna with the SMA filter, I love it. Going to keep one for tracking flights and the other for messing around with frequencies. I will probably use the new dongle on a windows VM and test VRS & others software. @FoxxMD This is all your fault

This is too much for an 6700K, hopefully that is only your PSU's rating. My main connected lab (24/7) (unraid server that has a Ryzen 1700x, a pfSense with an intel G4600, & a 24 port 15 watt switch) all connected to a UPS with a 90+ efficiency. Everything is connected to a power meter that shows my consumption at 225-235 watts.

looooooooool im on amazon getting antennas & stuff & on my second screen I got the monitor up. Any recommendations for antenna or other equipment to get I even attached its own with lets encrypt link to monitor outside the house. not much activity though https://fr.sykorp.net/gmap.html

got my Realtek RTL2838, got it configured and all running but I need to get some decent antennas of fabricate one my self and get a long cable to extend to my reach to the skies lol Thanks for the work mate with the 2 antennas provided with the USB I managed to pick up a couple of flights, this is awesome

Non of your array or cache is formatted! you need to format your cache drive first, check the info down next to start and stop the array.

try going to Tools, New Permission, User shares & select all. might fix your problem.

I did join the active directory a couple of times & when I removed my server from active directory back to workgroup everything goes back to normal.

I just join one of my servers to Active Directory & the interface shrunk similarly lol, I will try leaving the and see if it changes. EDIT: Yup, leaving the AD returns it to normal.

My Main unraid server is on its build 14.x.x & my other unraid server is on it build 6.x.x, I used multiple motherboards from AMD & Intel with different CPUs & Memory from different generations. I have switched parts & cards around, basically its not windows so I never go a BSOD I never had an issue moving the drives from one system to another, lets just say I'm a happy customer.

I just went on amazon and bought an RTL-SDR just for your docker, very interesting. Back in the 90's I had a hand held illegal scanner lol thanks for the work.

1st pfSense box with physical LAN "10.0.0.0/24 and 2 VLANs "10.0.1.0/24" "172.16.1.0/24" 2nd pfSense box with 1 VPNLAN "10.0.5.0/24" L2 Switch with 2 connected pfSense boxes and 3 VLANS in total. Server 1 has an intel i350 Quad GBe (Balance xor) "LAN" 10.0.0.3 & a built in 1GBe "SLAN" 10.0.1.3 Server 2 has 2 built in NICs "LAN 10.0.0.4 & "SLAN" 10.0.1.4 The issue mainly was a mis-configured VPNLAN port that was able to get into the routing table 10.0.5.1 via br0

I had the same issue on both servers, then i downgraded back to RC5. Eventually I upgraded both servers again to RC6 but I deleted the /boot/config/network.cfg file and rebooted the servers & after that all was working fine. There was a long list of troubleshooting including reseting my switch & fine tuning my pfsnese.

I'm actually new to LDAP as well, I'm using a Windows Server 2016 LDAP & testing it now with pfsense authetication server & nextcloud. not sure what else. I want a simple user database with a GUI, MS Server is a bit over complicated but I use it also for my network connected PCs authentication & GPO management.

thats odd, i have a server 2016 VM running on one of my unraid server & I managed to easily join the other unraid to the domain, in my case its always a DNS issue. are you using a firewall or any other dns management service? also did u manage to join any windows pc to the domain?

I upgraded, then started questioning my sanity...

I confirm the issue has been resolved in RC4, thanks for the tip.

I noticed in all 6.7 RC1, RC2, & RC4 didn't try RC3, on both my servers the transfer rates are extremely slow around 15MB/s both servers have encrypted Arrays. both servers are running multiple intel cards to a single managed switch (Vlans) & managed by a pfsense with a quad port intel i350 card. I had to revert to 6.6.6

I followed the instruction, very easy and simple to setup. Thanks to everyone who worked on or contributed to this project, amazing work.