Badboy

Hi, I have my router bridged with my iISP box. Internet speed is 360mbps down, 30 up. I have setup a 10 gig connect between my Unraid server and my deskstop for transferring a little faster. In general it does work., obviously not going to get great speeds but it is better then it was. I was having network issues and discovered that my ip had changed which was ok, but I also discovered that the bridge connection was not active on the iSP box. After fixing that I did a speed test and the desktop speed test was only 94 mbps down which is slow for my internet speed. I'm assuming this is because I have desktop linked directly to the server for its internet with the network card. Is there a way to fix the speed? Here's the setup Both have these network cards https://www.amazon.ca/TP-Link-Gigabit-Express-Network-TX401/dp/B08D71PVXG/ref=asc_df_B08D71PVXG/?tag=googleshopc0c-20&linkCode=df0&hvadid=459480626555&hvpos=&hvnetw=g&hvrand=13672389882836107514&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9000865&hvtargid=pla-1039482948896&psc=1 Server has a direct line from the Asus RT AC5300 for internet Server an desktop are both connected by the network cards using cat8 cabling. Desktop Specs Processor AMD Ryzen 7 1700X Eight-Core Processor 3.40 GHz Installed RAM 32.0 GB Server ASUSTeK COMPUTER INC. - ROG STRIX X470-F GAMING Processor:AMD Ryzen 9 3900X 12-Core @ 4 GHz 32G Ram I have attached A file that shows the active connection. 2 files that show the Unraid settings. Any ideas is appreciated. Stay safe and thank you.

Sorry, switched to Nzbget and solved the issue. Not sure exactly what broke Sab.

Solved

I know this is an old post, but I thought this would help someone else. I spent hours trying to get my router to pickup the custom Br0 ip I was setting for Nordvpn in the Merlin firmware. I couldn't figure out why it wouldn't show up until I came across the Unmask setting, changed it to 000 and connected instantly to the ip. Never had this issue with any other docker except the NZBget. That setting needs to be more visible on install.

Hi, For some strange reason as soon as I turn Sabnzb (linuxserver version) on it shuts the internet down. It has been setup the same way for a long time. Own ip address - connected to Nordvpn. Still does it with Nordvpn off. It is acting like a firewall is kicking in but not seeing any blockage for it. Have a ASUS Router RT-Ac5300 on Merlin Firmware - Firmware is up to date. In the router logs I found this. I know it's related to Nord, not sure fully what it means. Sep 6 01:57:04 ovpn-client1[17461]: TLS: tls_process: killed expiring key Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=2, C=PA, O=NordVPN, CN=NordVPN Root CA Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=1, C=PA, O=NordVPN, CN=NordVPN CA5 Sep 6 01:57:04 ovpn-client1[17461]: VERIFY KU OK Sep 6 01:57:04 ovpn-client1[17461]: Validating certificate extended key usage Sep 6 01:57:04 ovpn-client1[17461]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Sep 6 01:57:04 ovpn-client1[17461]: VERIFY EKU OK Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=0, CN=ca1014.nordvpn.com Sep 6 01:57:05 ovpn-client1[17461]: Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sep 6 01:57:05 ovpn-client1[17461]: Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sep 6 01:57:05 ovpn-client1[17461]: Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(420): eth3: Auth 30:FD:38:C9:BB:32, status: 0, reason: d11 RC reserved (0) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(430): eth3: ReAssoc 30:FD:38:C9:BB:32, status: 0, reason: d11 RC reserved (0) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(401): eth2: Disassoc 30:FD:38:C9:BB:32, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(401): eth2: Disassoc 30:FD:38:C9:BB:32, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8) Any ideas? Thanks

No, but I think it might be my 4tb WD drives. I wiped one off, haven't had a chance to shut the server down to try it. Just going to plug it direct into my last sata slot on the board. See if unraid sees it to add it to my pool. I can't test with a current drive and the LSI card because my cables are not long enough. Have to go buy some. The drives could explain why this card will not pick them up. I will let you know what happens. Hopefully help someone else. By all indications this card should work, green light flashing, I see it in the boot up screen, Unraid sees it in the iommu. Firmware might be too new.

I will go and try that shortly. Good idea...Thank you.

All I'm trying to do is connect 4 drives inside my case. Not working too well for some reason. LOL.. Something is off somewhere. Plug the main cable into 1 of the 2 main ports, run the 4 cables to the drives and Bob's your uncle. Beginning to think it's something in Unraid this time and not the card or cables.

Sorry, let me just clarify. I wanted to see if I could even add a disk to my current array. I have one sata port left on the motherboard so I plugged a drive into that slot with a single cable. After I rebooted I couldn't find the drive. When you stop the array the unassigned window comes up to assign another drive to the array. The drive I just connected is not there. I'm using a Blue cable instead of red, shouldn't matter.

Here's something strange. I have 1 sata port left on the board, so i decided to test one of the drives by plugging it in direct, stopping the array and adding the drive. The drive won't show up. The only one that shows is the mounted one under assigned devices. Not sure if something is shutoff or not. I don't think so, but this could explain why the controller drives don't show. Any ideas?

Hi Benson, just an update - new cables doesn't make a difference. At a lose now. Might just have to setup something external. Unraid doesn't seem to want to play nice with these cards.

No problem, going to try those cables, just seems really strange that the drives won't post. These are cheaply made cables, read that some people have had to replace them. I wouldn't think both of mine were bad, who knows LOL. Thanks for the help stay safe.

The disks are not posting in unassigned devices. Just want to add them to unassigned devices and create a pool. I checked out some other cables. These look like better quality https://www.amazon.ca/LiNKFOR-Breakout-SFF-8087-Multi-Lane-Internal/dp/B07XDB61V5/ref=sr_1_10?dchild=1&keywords=Mini+SAS+36P+SFF-8087+to+4+SATA+7Pin&qid=1599075323&sr=8-10

Just plugging into the one port of the card and the 4 lines out to the sata drives. These are just going to be posted unassigned devices for backups. Won't be any part of the raid. Bought both sets from the same seller. Little long, but I have a big case that I have to run them through the back and out the other side. I will buy another set. Any recommendations? They were the right type of cables I assume? Forward breakout 8087

You think maybe it's the type of cables. I thought about that, I bought 2 sets of them. Any suggestions for cables? Appreciate the help.

Hi. I just bought this card https://www.amazon.ca/gp/product/B0085FT2JC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 When Unraid boots it shows the LSI Card. The Avago Utility tool doesn't show any drives. I can't find the card in my BIOS unless I'[m missing it. Card is In IT Mode - FW 20 4 Drives connected to the card are WD 4TB - Came from my Qnap. ASUSTeK COMPUTER INC. - ROG STRIX X470-F GAMING Processor:AMD Ryzen 9 3900X 12-Core @ 4 GHz The card does show under system devices ( NOT UNDER SCSI Devices) IOMMU group 15:[1022:43d0] 01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43d0 (rev 01) [1022:43c8] 01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01) [1022:43c6] 01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01) [1022:43c7] 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [1022:43c7] 02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [1022:43c7] 02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [1022:43c7] 02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [1022:43c7] 02:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01) [1000:0087] 03:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) [1b21:1242] 04:00.0 USB controller: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller [8086:1539] 06:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) Using these cables https://www.amazon.ca/gp/product/B012BPLYJC/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 These cables were new, tried both sets. I think this card will work, something is just out of whack somewhere. Could it be the IOMMU groups, unassigned devices? I do have a ssd drive mounted in unassigned devices. This is the 2nd card I have bought and it is the closest I have gotten. Green light is flashing. These cards sure do run hot. My case is pretty open, might have to put a fan on it. Hopefully someone can help before I pull all my hair out, or run out of money buying cards. LOL Thanks Randy

Hi Kevin, I just bought this card https://www.amazon.ca/gp/product/B0085FT2JC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 When Unraid boots it shows the LSI Card and lets me go to the Avango Utility. I get the same screens you do. Using these cables https://www.amazon.ca/gp/product/B012BPLYJC/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Won't pick the drives up, doesn't show in Unraid system devices. What did you do to get yours to work? This is the second card I bought. Getting a little frustrated...LOL. First card that actually showed on boot though. ASUSTeK COMPUTER INC. - ROG STRIX X470-F GAMING Processor:AMD Ryzen 9 3900X 12-Core @ 4 GHz Any help would be appreciated. Thanks Randy

Thanks, all good.

Hi Hi, Did you ever get this card to work? It wouldn't work on my Asrock x370 board. Just bought a Asus Rog Strix x470 board and it still won't work with the latest bios updates. Green light in the rear is on, but I think the card is garbage. I bought it off Ebay, never been a big fan of. LOL

Just an update. Managed to get the card to work using the LSIO container.

I did manage to straighten the LSIO container out. I will see if I can get it run with the card now. Thanks

You are right, the other container is a better option. I tried LSIO container, for some strange reason I couldn't play anything it couldn't find the files. I did install into the same folder as my current plex so I would still have my data and I did update the paths. It could still have something to do with it. Thanks for the response.

Hi, Just got a NVIDIA p2200, has anyone got this card to work with the official Plex docker? I installed the Unraid NVdia app for the drivers. Still can't get it to work. Tried to switch dockers to the Linuxserver , but for some reason it would not pick up my tv or movie paths when I tried to play anything. Double checked the paths. Just says file doesn't exists. Anybody got any ideas? Thanks. ASUSTeK COMPUTER INC. - ROG STRIX X470-F GAMING Processor:AMD Ryzen 9 3900X 12-Core @ 4 GHz

Hi, I'm curious, is this the same motherboard you have? https://www.msi.com/Motherboard/B450-GAMING-PRO-CARBON-AC/Specification I have been trying to buy it, I have seen the same model with different ram specs, the one I want supports 128 gigs of ram. The other one with the same model# supports 64 gigs of ram. I called MSI, guy told me this board is not suitable for a server, and that it doesn't support unbuffered ram. That's not what I'm seeing. LOL.. I'm seeing this board is better then the Asrock x370 killer SLI I have. Can you shed any light on this? Much appreciated. Trying to upgrade my board without changing my Ryzen x1700 right now.

Hi, Been looking at a lot of motherboards, finally might be coming closer. Anybody using this board with a Ryzen CPU? https://www.asus.com/Motherboards/ROG-Strix-X570-E-Gaming/specifications/ It says it supports 1st Gen, but I don't think it will support my Ryzen 1700x. If I go with this one I will likely have to change the CPU. Figured this much anyway with a newer board. Stay Safe!