langelus

Had some issues after updating to the lastest version (0.15), changing the owner ID of the data foldr from 101 to 100 got it running though.

Seems like for some reason I can't access the VNC anymore, it used to work flawlessly but all I get now is an error message in noVNC "HTTPS is required for full functionality" and if I click through that I get the prompt for password with the error "New connection has been rejected with reason: Authtentication failure: No password configured for VNC Auth"? I do have the password set in the environment variable

Seems like this one is removed from "apps", I do miss it.. any chance of it reapperaring?

Any particular reason for the flash backup to demand 1 GB of free space? That's a no go since I run my server on a 1 GB Nanodura USB stick (made for purpose of running things like Unraid or ESXi) and I Only got 400 MB free there...

Found the problem. Might aswell put it to text here if it might help someone in the future. My setup only got one IP (on the main interface) and then VLAN's for VM and Dockers. What the problem was since I had custom networks to be able to put dockers directly in the Wifi VLAN the routing table got somewhat messed up and sending part of the traffic to that custom docker network instead of to my firewall for the intervlan routing. Removed those custom networks, put everything in the main LAN instead and voila, SMB transfers successful again.

Hi, I just can't seem to figure this out, from both computers and phones the transfer starts and then halts after 20-30 seconds with errorcode 0x8007003B when transfering from VLAN for Wifi and VLAN for Wired devices. I can only replicate it to my Unraid server so I'm quite positive it is something to do with Unraid. Unraid server on 192.168.0.0/24 <-> Client on 192.168.0.0/24 : Works Unraid server on 192.168.0.0/24 <-> Client on 192.168.20.0/24 : Times out after 20-30 Seconds Windows 10 Computer 192.168.0.0/24 <-> Client at 192.168.0.0/24 : Works I've tried just about any fix I can find about that errorcode and made sure the Unraid server is the SMB Master browser. Speed until it stops is quite decent at about 500 Mbps but I'm still limited to the amount of data that can be transfered in that Windows so files over 600 MB triggers this. Clients I have been testing with are Windows 10 Pro 2004 and Galaxy S10. Anyone got this working alright?

Snapshots of VM's would be greatly appreciated, always nervous making major updates to systems and not being able to roll back easily if anything screws up.

I might be wrong but I thought that 6.7.0 was the latest patched version?

I'm using Owncloud, there is an option to sync photos in settings in the Android/iOS app.

Is it perhaps a HP server? In that case use the HP patched bzimage

Hard to see why that would make a difference NFS/SMB but might aswell give it a try. Unfortunately 10 Gb is not possible without replacing all my hardware (no room for NIC's in the servers) so that's a "wallet says; no"

Running two unraidservers with pfsense in HA, one with a Intel Dual NIC passthrough and one with bridged interfaces (will change to Intel NIC soon, it's in the mail) and it works great.

Hi! Been trying to configure bonding for my two HP Microservers to my Netgear GS724TP switch. Tried both balance-rr and LACP and both works in the regard that I achieve connectivity to the servers but it still behaves like a single link in performance, networking isn't my strongest subject so any input from you guys is more than welcome Tests performed: SMB transfer from two concurrent clients reading large files one share (files reside on different disks in share) Iperf3 test from two concurrent clients with the server running the Iperf3 server processes Outcome: Server maxing out at 1 Gb/s

Just starting out with Docker so this is probably fairly obvious for you guys I need to make some additional reverse lookup zones in /etc/dnsmasq.d and setting these directly in 01-pihole.conf works great but how do I make them persistent across reboots and upgrades of the container? Thanks!

Hi all! Just wondering if anyone had any success in installing the "HP Agentless Management Service" on unraid? I have two HP microservers, one with Windows baremetal and one with Unraid and because Unraid doesn't have the managementservice it really kicks up the fan to a annoying level (hot right now but 20% fan on Windows, 60% on Unraid.) HP have got the software on their site but only for Redhat, would it be possible to install that on Unraid in some way? Best regards, Patrik