MyKroFt

K didn't know that

I am getting unable to connect to crashplan engine in the GUI version - is the something I need to configure specifically beside /media to /mnt/user? Thanks Myk

I removed the plugin, removed the setting folder, rebooted, reinstalled plugin and am still getting blank pages for all 3 tabs. Page is rendering, as I have footer at the bottom.... Ideas? Myk

hm... something happened - all tabs are now blank and the setting gear icon changed Myk

any option that would be nice, is a report tab with a plain text listing everything for a nice printout etc Thanks for the plugin! Myk

Also, I just changed my layout, and the assigned drives were wiped and didn't stay Myk

Here is my layout tab and data tab https://dl.dropboxusercontent.com/u/17453506/server-layout-1.png https://dl.dropboxusercontent.com/u/17453506/server-layout-2.png Myk

that modification started bringing up all my drives - now the purchase field is cut off on the right side - its too wide

Mine is also only seeing my flash drive my layout tab also goes out past the header on the right side - so scree is lopsided..... root@Tower:~# ls -las /dev/disk/by-id total 0 0 drwxr-xr-x 2 root root 1520 May 21 00:50 ./ 0 drwxr-xr-x 7 root root 140 May 21 00:50 ../ 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-Crucial_CT240M500SSD1_1332095464B2 -> ../../sdb 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-Crucial_CT240M500SSD1_1332095464B2-part1 -> ../../sdb1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-HDS725050KLA360_KRVN6CZBHVS5AL -> ../../sdc 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-HDS725050KLA360_KRVN6CZBHVS5AL-part1 -> ../../sdc1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-Hitachi_HDS5C3020ALA632_ML2220F32S5M4E -> ../../sdn 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-Hitachi_HDS5C3020ALA632_ML2220F32S5M4E-part1 -> ../../sdn1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-SAMSUNG_HD203WI_S1UYJ1KSC00985 -> ../../sdr 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-SAMSUNG_HD203WI_S1UYJ1KSC00985-part1 -> ../../sdr1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-SAMSUNG_HD203WI_S1UYJ1KSC00987 -> ../../sde 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-SAMSUNG_HD203WI_S1UYJ1KSC00987-part1 -> ../../sde1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST1000DM000-9TS15E_5YA00H6T -> ../../sdo 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST1000DM000-9TS15E_5YA00H6T-part1 -> ../../sdo1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST2000DL003-9VT166_5YD741R0 -> ../../sdq 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST2000DL003-9VT166_5YD741R0-part1 -> ../../sdq1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST2000DL003-9VT166_5YD88DSE -> ../../sdd 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST2000DL003-9VT166_5YD88DSE-part1 -> ../../sdd1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST2000NM0011_Z1P01RAB -> ../../sdm 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST2000NM0011_Z1P01RAB-part1 -> ../../sdm1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3RTF7 -> ../../sds 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3RTF7-part1 -> ../../sds1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3RTLP -> ../../sdj 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3RTLP-part1 -> ../../sdj1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3TQ81 -> ../../sdh 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST3000DM001-1CH166_Z1F3TQ81-part1 -> ../../sdh1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST3000DM001-9YN166_S1F0JW3Z -> ../../sdg 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST3000DM001-9YN166_S1F0JW3Z-part1 -> ../../sdg1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST3000DM001-9YN166_Z1F18VA2 -> ../../sdp 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST3000DM001-9YN166_Z1F18VA2-part1 -> ../../sdp1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST31000524AS_5VP8KR1W -> ../../sdk 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST31000524AS_5VP8KR1W-part1 -> ../../sdk1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-ST4000DM000-1F2168_W3008YF1 -> ../../sdl 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-ST4000DM000-1F2168_W3008YF1-part1 -> ../../sdl1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-WDC_WD30EZRX-00DC0B0_WD-WMC1T0371321 -> ../../sdi 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-WDC_WD30EZRX-00DC0B0_WD-WMC1T0371321-part1 -> ../../sdi1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 ata-WL2000GSA6472C_WOL240221877 -> ../../sdf 0 lrwxrwxrwx 1 root root 10 May 21 00:51 ata-WL2000GSA6472C_WOL240221877-part1 -> ../../sdf1 0 lrwxrwxrwx 1 root root 9 May 27 22:11 usb-Generic_Flash_Disk_1177DBEF-0:0 -> ../../sda 0 lrwxrwxrwx 1 root root 10 May 21 00:51 usb-Generic_Flash_Disk_1177DBEF-0:0-part1 -> ../../sda1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c5002a40de1c -> ../../sdk 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c5002a40de1c-part1 -> ../../sdk1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c5002e98b8f3 -> ../../sdo 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c5002e98b8f3-part1 -> ../../sdo1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c5003527f2b0 -> ../../sdm 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c5003527f2b0-part1 -> ../../sdm1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50044d89f5d -> ../../sdq 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50044d89f5d-part1 -> ../../sdq1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50048f8223a -> ../../sdd 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50048f8223a-part1 -> ../../sdd1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c5004e62eb4d -> ../../sdp 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c5004e62eb4d-part1 -> ../../sdp1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50051043f1e -> ../../sdg 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50051043f1e-part1 -> ../../sdg1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c500608668f3 -> ../../sdl 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c500608668f3-part1 -> ../../sdl1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50064cf92c8 -> ../../sdj 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50064cf92c8-part1 -> ../../sdj1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50064cf9d99 -> ../../sds 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50064cf9d99-part1 -> ../../sds1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000c50064db298e -> ../../sdh 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000c50064db298e-part1 -> ../../sdh1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000cca20eda4023 -> ../../sdc 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000cca20eda4023-part1 -> ../../sdc1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x5000cca369e6b8a1 -> ../../sdn 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x5000cca369e6b8a1-part1 -> ../../sdn1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x50014ee002c420c2 -> ../../sdf 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x50014ee002c420c2-part1 -> ../../sdf1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x50014ee0ae15cb6b -> ../../sdi 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x50014ee0ae15cb6b-part1 -> ../../sdi1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x50024e900293f54c -> ../../sdr 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x50024e900293f54c-part1 -> ../../sdr1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x50024e900293f558 -> ../../sde 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x50024e900293f558-part1 -> ../../sde1 0 lrwxrwxrwx 1 root root 9 May 21 00:51 wwn-0x500a0751095464b2 -> ../../sdb 0 lrwxrwxrwx 1 root root 10 May 21 00:51 wwn-0x500a0751095464b2-part1 -> ../../sdb1

What about the 'find' utils - there used to be a plugin to install this - but is not maintained anymore. Was real nice to cron schedule a updatedb, and then locate a file somewhere on the file system Thanks Myk

what needs to be added for this container to process (read) x265? Thanks Myk

Starting for today's update, array start/stop won't mount/unmount disks which "Auto mount" is disabled. If you want an always mounted disk, you can add something like this to the beginning of your /boot/config/go file: unassigned_mount /dev/disk/by-id/ata-INTEL_SSDSC2CT120A3_DISKSERIAL00000000000 This the easiest way I could manage with the events currently available. What about a always-on setting that is saved, and just a single command needed in the go file that would auto mount/share any multiple devices needed - less prone to a mistake in the go file for the mount to fail....? Thanks Myk

In the auto mounting - when in the boot chain are these mounted? before dockers are started? Thanks Tony

The modprobe lines need to go into your go file my sensors.conf is as follows for a example # lines starting with "#" are comments and ignored # sensor configuration chip "nct6776-isa-*" label temp1 "MB Temp" label temp2 "CPU Temp" The wiki entry listed tells you step by step what to do Myk

Thank you much, that did it Myk

Any ideas here? Thanks Myk

having problems getting my sensor.conf file correct - the labels are not getting changed: sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +27.8 C (crit = +95.0 C) temp2: +29.8 C (crit = +95.0 C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +24.0 C (high = +74.0 C, crit = +94.0 C) Core 0: +22.0 C (high = +74.0 C, crit = +94.0 C) Core 1: +23.0 C (high = +74.0 C, crit = +94.0 C) Core 2: +18.0 C (high = +74.0 C, crit = +94.0 C) Core 3: +21.0 C (high = +74.0 C, crit = +94.0 C) nct6776-isa-0a30 Adapter: ISA adapter Vcore: +1.00 V (min = +0.60 V, max = +1.49 V) in1: +1.87 V (min = +1.62 V, max = +1.99 V) AVCC: +3.28 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.28 V (min = +2.98 V, max = +3.63 V) in4: +1.53 V (min = +1.35 V, max = +1.65 V) in5: +1.27 V (min = +1.13 V, max = +1.38 V) in6: +1.46 V (min = +1.42 V, max = +1.52 V) 3VSB: +3.34 V (min = +2.98 V, max = +3.63 V) Vbat: +3.17 V (min = +2.70 V, max = +3.63 V) fan1: 0 RPM (min = 300 RPM) ALARM fan2: 0 RPM (min = 300 RPM) ALARM fan3: 0 RPM (min = 300 RPM) ALARM fan4: 0 RPM (min = 300 RPM) ALARM fan5: 2042 RPM (min = 300 RPM) SYSTIN: +26.0 C (high = +75.0 C, hyst = +70.0 C) sensor = thermistor CPUTIN: +19.5 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor AUXTIN: +1.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +29.5 C (high = +95.0 C, hyst = +92.0 C) (crit = +100.0 C) PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C intrusion0: ALARM intrusion1: OK beep_enable: enabled sensors.conf # lines starting with "#" are comments and ignored # sensor configuration chip "nct6776-isa-0a30" label SYSTIN "MB Temp" label CPUTIN "CPU Temp" can not get the labels for SYSTIN and CPUTIN to change so we page picks it up Thanks for any info Myk

Asked on Amazon and got: After consulting with Kingston Support, the answers are: 1) Yes. It has it's unique GUID 2) No, it cannot boot from any of the two ports Kingston Technology U.S. Sales Support - End User +1 (800) 835-6575 U.S./Canada Technical Support +1 (800) 435-0640 +1 (714) 435-2639

installing the server plg I get the following at the end: Warning: copy(/boot/config/plugins/openvpnserver/Ovpntech_logo-s_REVISED.png): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/plgMan/plugin on line 220 plugin: unable to copy LOCAL file: /usr/local/emhttp/plugins/openvpnserver/Ovpntech_logo-s_REVISED.png Myk

I am not sure the licensing would allow it. This one instead - better fork of it: http://forums.nzedb.com/index.php Myk

The way I do it, is I copy /boot/* to a dropbox folder when I make major changes - this way it gets sync'd, and if I have a prob, I have the files avail to my windows desktop when I am fixing and flash drive problems. I have not gotten around to it yet, but was considering make a bash script that checks like every 30 secs if the array is down and checks the last access to the dropbox folder, if it has not updated it that day, update, if updated that day skip this way I dont have to remember to update the backup Myk

We are not talking about a plugin. It's a status bash script Sent from my SCH-I545 using Tapatalk

many things are/can be started from the go file - unMenu is the main one that comes to mind Myk

if it is just gonna display text, sleep and rotate - you can start it via the go file and direct it to one of the extra ttys - i direct a tail -f of my syslog to F9 Myk

I would look into tmux - its a screen/window mgr - can have multi seperate windows on a screen and multi screens. You an direct a process to a "pane" i guess is what they call them and not have scrape from utils etc I use it here on my nzb indexer for all the different processes runing myk