sonata31380 Posted October 10, 2021 Share Posted October 10, 2021 Hello I am using the latest version of unRAID I have the following problem While copying a file from a usb disk with Krusader, the disk accesses are looped I lost access to the web interface (https: // IP_Server) From a PC on the same network I can access telnet, I can log in as root I launched a halt command, it took more than two hours to stop the server I restarted the server, it has now been over 12 hours since the disks have been active, but I still do not have access to the web interface, only with telnet What solution to regain this access without losing my data? Thanks for your help Louis Quote Link to comment
Squid Posted October 10, 2021 Share Posted October 10, 2021 from the command line, diagnostics enter then upload the resulting file saved onto the flash drive (logs folder) Or alternatively, https://IP_ADDRESS and then grab the diagnostics from the tools tab Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 Hello How to copy diagnostics file from telnet window in windows 10? Thanks for your help Louis Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 hcsrv1-diagnostics-20211010-1627.zip Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 Do you have an attached monitor and keyboard? Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 Yes, but I also access it by telnet Louis Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 If you boot in GUI mode can you access the web interface using the attached keyboard and monitor? Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 To test this I have to restart the server, and it may last more than two hours like the previous time Louis Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 My other suggestion was going to be to recreate your flash drive from its backup. Do you have a flash backup? Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 You don't have much RAM. Are you running any dockers or VMs? Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 I don't have a backup I use docker with Krusader Louis Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 7 minutes ago, sonata31380 said: it may last more than two hours like the previous time Not clear what you mean by that. 7 hours ago, sonata31380 said: the disk accesses are looped or that Quote Link to comment
trurl Posted October 10, 2021 Share Posted October 10, 2021 2 minutes ago, sonata31380 said: don't have a backup You must always have a current backup of flash. I would say that is even more important than getting your parity sync errors fixed. Shutdown, put flash in PC, let it checkdisk. While there make a backup. Reboot, preferably in GUI mode. Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 When I shut down the server (when I saw that I no longer had web access) it lasted more than two hours Once I stopped, I restarted the server to find that I still did not have web access, and that the disk access was permanent (red led on) Louis Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 If I replace my current flash drive with one containing the unRAID server? I will not lose the contents of my discs? Louis Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 If I install a new flash drive with an initial version of unRAID, what files can I copy from the current flash drive to the new flash drive to regain my configuration? Louis Quote Link to comment
Squid Posted October 10, 2021 Share Posted October 10, 2021 the contents of /config Quote Link to comment
sonata31380 Posted October 10, 2021 Author Share Posted October 10, 2021 Won't this cause the problems I have now? Quote Link to comment
sonata31380 Posted October 11, 2021 Author Share Posted October 11, 2021 I restarted the server in GUI mode, but not possible to access it with the web interface Louis Quote Link to comment
sonata31380 Posted October 11, 2021 Author Share Posted October 11, 2021 I have always accessed by telnet from a networked PC I have the impression that the web server does not start How to force it to start? Louis Quote Link to comment
itimpi Posted October 11, 2021 Share Posted October 11, 2021 1 hour ago, sonata31380 said: I have always accessed by telnet from a networked PC I have the impression that the web server does not start How to force it to start? Louis The web server is started by the entry in the /config/go file on the flash drive. As long as the flash drive mounts correctly that should therefore be automatic. Have you ttried the 'df' command to check it is mounted at /boot? Quote Link to comment
sonata31380 Posted October 11, 2021 Author Share Posted October 11, 2021 Filesystem 1K-blocks Used Available Use% Mounted on rootfs 1850672 1075000 775672 59% / devtmpfs 1850680 0 1850680 0% /dev tmpfs 1960872 10284 1950588 1% /dev/shm cgroup_root 8192 0 8192 0% /sys/fs/cgroup tmpfs 131072 284 130788 1% /var/log /dev/sda1 1953776 528992 1424784 28% /boot overlay 1850672 1075000 775672 59% /lib/modules overlay 1850672 1075000 775672 59% /lib/firmware tmpfs 1024 0 1024 0% /mnt/disks /dev/md1 5860343676 5840734608 19609068 100% /mnt/disk1 /dev/md2 7813788060 7782609804 31178256 100% /mnt/disk2 /dev/md3 7813788060 7768740616 45047444 100% /mnt/disk3 /dev/md4 7813788060 7799764596 14023464 100% /mnt/disk4 /dev/md5 5860343676 5857132336 3211340 100% /mnt/disk5 /dev/md6 7813788060 7755706156 58081904 100% /mnt/disk6 /dev/md7 2930177100 2888928376 41248724 99% /mnt/disk7 /dev/md8 7813788060 2986960120 4826827940 39% /mnt/disk8 /dev/md9 2928835740 2897921596 30914144 99% /mnt/disk9 /dev/md10 5858435620 5801915900 56519720 100% /mnt/disk10 /dev/md11 5858435620 5834530208 23905412 100% /mnt/disk11 shfs 68365511732 63214944316 5150567416 93% /mnt/user0 shfs 68365511732 63214944316 5150567416 93% /mnt/user /dev/loop2 10485760 2223416 7526120 23% /var/lib/docker Quote Link to comment
sonata31380 Posted October 11, 2021 Author Share Posted October 11, 2021 Samba shares also work Only web access is not active Louis Quote Link to comment
itimpi Posted October 11, 2021 Share Posted October 11, 2021 1 hour ago, sonata31380 said: Samba shares also work Only web access is not active Louis Perhaps you should check the contents of the config/go file on the flash drive to check you have not inadvertently removed the line to start the web gui? Quote Link to comment
sonata31380 Posted October 11, 2021 Author Share Posted October 11, 2021 What should this file contain? Louis Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.