February 14, 201313 yr Have a minor issue with Simplefeatures. I did an update from 1.0RC2 to 1.05, because i updated unraid to the last RC. My problem now is that Simplefeatures shows the S3 Sleep Script as running (and it runs and works) on the settings page, but on the same page the settings are saying that the S3 Sleep Script is disabled. Any thoughts about that? Any thoughts about that?
February 14, 201313 yr Also a nice idea: Would it be possible to give an overall piechart showing distribution of storage per share over the whole array ? I am thinking of a piechart showing something like: 50% Movies, 50% Series, 5% User ? +1 BUT 50 + 50 + 5 = 105 ) Sent from my GT-I9100 using Tapatalk 2
February 14, 201313 yr Have an issue with SF Web Server on unRAID Server 5.0-rc11 AiO. The primary management web interface (http://tower) is not accessible once simpleFeatures.web.server-1.0.5-noarch-1.plg installed (tried manual install and rebooting). Also tried with simpleFeatures.core.webGUI-1.0.5-noarch-1.plg and simpleFeatures.web.server-1.0.5-noarch-1.plg as ONLY plugins. When removing simpleFeatures.web.server-1.0.5-noarch-1.plg and rebooting the tower, the web interface is available again. Any help appreciated.
February 14, 201313 yr I doubt it as I'm sure this is not the default behavior of the plugin. I first noticed the issue when wanting to configure the plugin.
February 14, 201313 yr Seems the .tgz didn't finish downloading (only got 3.3 of the 19.2mb). Now resolved.
February 15, 201313 yr I have a question about the active streams section, user names. I add user names to those fields and if I take down the server and bring it back up the user names are erased. Is there a way to fix this?
February 15, 201313 yr I installed SF 1.05 today. One thing I noticed that the Health page is responding rather slow. Is this to be expacted? I have 2 disks on a ARC1200 controller and 15 array disks on 2 M1015 controllers. SMART reports also appear rather slow, after about 30 sec waiting. Might be my hardware setup. Just like to know.
February 15, 201313 yr That doesn't sound right. Mine is rather snappy. At times it sits for a second then goes but for the most part it's snappy.
February 15, 201313 yr I installed SF 1.05 today. One thing I noticed that the Health page is responding rather slow. Is this to be expacted? I have 2 disks on a ARC1200 controller and 15 array disks on 2 M1015 controllers. SMART reports also appear rather slow, after about 30 sec waiting. Might be my hardware setup. Just like to know. Try spinning up all of your drives using the button on the Main Page. That has a significant effect on the response time on my system.
February 16, 201313 yr Yeah, I agree that that's what it's supposed to do, but that's not what's happening. I was just guessing at why it seemed to do what it did. Hopefully someone knows the actual newperms script so I can just run it manually. You are running RC11a which is a special test version. Try with RC11. You might also want to clear your browser cache, and try again. Clearing browser cache didn't change anything, and there's nothing in the only 2 changes in 11a that sounds like it would affect this... Changes from 5.0-rc10 to 5.0-rc11a ---------------------------------- - shfs: return correct extended attribute value length - webGui: for 'FTP user(s)', permit multiple usernames separated by spaces So, does anyone have the actual newperms script that I can just run manually?
February 16, 201313 yr So, does anyone have the actual newperms script that I can just run manually? You can find the newperms script with which newperms I get /usr/local/sbin/newperms then cat /usr/local/sbin/newperms produces #!/bin/bash # Usage: newperms [dir] [owner] [group] # Recursively changes the ownership and permissions of the directory and all files/subdirs # within the directory. # If no arguments given, operates on /mnt/cache and /mnt/disk*, setting owner:group to nobody:users # default owner is 'nobody', default group is 'users' # This was created to fix ownership/permissions when upgrading to unRAID version 5. # With corrections suggested by forum member Stokkes # Here's a breakdown of chmod "u-x,go-rwx,go+u,ugo+X" # u-x Clear the 'x' bit in the user permissions (leaves rw as-is) # go-rwx Clear the 'rwx' bits in both the group and other permissions # go+u Copy the user permissions to group and other # ugo+X Set the 'x' bit for directories in user, group, and other function process { if [ -e "$1" ] ; then owner=nobody group=users if [ $# -ge 2 ]; then owner=$2 fi if [ $# -ge 3 ]; then group=$3 fi echo processing "$1" echo ... chmod -R u-x,go-rwx,go+u,ugo+X "$1" chmod -R u-x,go-rwx,go+u,ugo+X "$1" echo ... chown -R $owner:$group "$1" chown -R $owner:$group "$1" echo ... sync sync fi } if [ -n "$1" ] ; then process "$@" else process /mnt/cache for disk in /mnt/disk* ; do process $disk done fi secs=$SECONDS printf "completed, elapsed time: %.2d:%.2d:%.2d\n" $(($secs/3600)) $(($secs%3600/60)) $(($secs%60)) With the right software (7-zip) it is possible to unpack the archive in bzroot and examine it in Windows. The files in this archive are unpacked into the RAMfs when unRAID boots. In the archive you can find, for example, the file /usr/local/sbin/newperms I just used that method to do a file compare between the rc11 and rc11a newperms scripts and they are identical.
February 16, 201313 yr I can't get the email plug-in to work... when i test it, it shows "mail sent" I see it in the inbox of the account that i am sending from, but it never gets delivered to the address that I am sending to. i've checked spam. This is my "services" account, a gmail account that I use for most automated/system type things.
February 16, 201313 yr I can't get the email plug-in to work... when i test it, it shows "mail sent" I see it in the inbox of the account that i am sending from, but it never gets delivered to the address that I am sending to. i've checked spam. This is my "services" account, a gmail account that I use for most automated/system type things. The Test button on the Setup SMTP page will send the test email to the address set in "Account email address" on the Setup SMTP page. Is that is what it is doing? The purpose of that page is to configure the server (smtp) the emails are sent from and also to configure the login information for that server. The addresses on the Setup Email page do not get used for the test. Those addresses control where the notifications get sent To: Different notifications can be sent to different recipients.
February 16, 201313 yr I can't get the email plug-in to work... when i test it, it shows "mail sent" I see it in the inbox of the account that i am sending from, but it never gets delivered to the address that I am sending to. i've checked spam. This is my "services" account, a gmail account that I use for most automated/system type things. The Test button on the Setup SMTP page will send the test email to the address set in "Account email address" on the Setup SMTP page. Is that is what it is doing? The purpose of that page is to configure the server (smtp) the emails are sent from and also to configure the login information for that server. The addresses on the Setup Email page do not get used for the test. Those addresses control where the notifications get sent To: Different notifications can be sent to different recipients. ah okay - so that's really just the test email address - that's what it is doing. so - in Setup Email, Email recipients: and Error recipients would be my email addresses that I want alerted in case of an issue? and Sending Address is who it should appear to come from? thanks!
February 16, 201313 yr For some reason (and this started a month or so ago) the SimpleFeatures webserver does not start automatically after a reboot. The settings in the website show it as enabled but not running. Basically all I do is press APPLY and then it starts.. I quite frequently forget this and this makes the webserver and from that several other tools unaccessible untill I remember... Anyone any idea ? Syslog does not show anything specific: eb 15 14:34:35 Tower logger: +============================================================================== Feb 15 14:34:35 Tower logger: | Installing new package /boot/config/plugins/simpleFeatures/simpleFeatures.web.server-1.0.5-i486-1.tgz Feb 15 14:34:35 Tower logger: +============================================================================== Feb 15 14:34:35 Tower logger: Feb 15 14:34:36 Tower logger: Verifying package simpleFeatures.web.server-1.0.5-i486-1.tgz. Feb 15 14:34:38 Tower logger: Installing package simpleFeatures.web.server-1.0.5-i486-1.tgz: Feb 15 14:34:38 Tower logger: PACKAGE DESCRIPTION: Feb 15 14:34:38 Tower logger: Package simpleFeatures.web.server-1.0.5-i486-1.tgz installed. Feb 15 14:34:38 Tower logger: Feb 15 14:34:38 Tower logger: Feb 15 14:34:38 Tower logger: success Feb 15 14:34:38 Tower logger: file /boot/config/plugins/simpleFeatures/simpleFeatures.web.server.png: already exists Feb 15 14:34:38 Tower logger: file /usr/local/emhttp/plugins/simpleFeatures.webServer/images/webserver.png: successfully copied LOCAL file Feb 15 14:34:38 Tower logger: file /tmp/plugin-cleanup: successfully wrote INLINE file contents Feb 15 14:34:38 Tower logger: /bin/bash /tmp/plugin-cleanup ... success Feb 15 14:34:38 Tower logger: file /etc/rc.d/rc.lighttpd: successfully wrote INLINE file contents Feb 15 14:34:38 Tower logger: successfully changed file mode Feb 15 14:34:38 Tower logger: file /etc/rc.d/rc.snmpd: successfully wrote INLINE file contents Feb 15 14:34:38 Tower logger: successfully changed file mode Feb 15 14:34:38 Tower logger: file /tmp/web/index.html: successfully wrote INLINE file contents Feb 15 14:34:38 Tower logger: file /tmp/plugin-install: successfully wrote INLINE file contents Feb 15 14:34:38 Tower logger: /bin/bash /tmp/plugin-install ... executing ! Feb 15 14:34:39 Tower logger: Feb 15 14:34:39 Tower logger: ************************************************************* Feb 15 14:34:39 Tower logger: * SimpleFeatures Web Server has been installed. Feb 15 14:34:39 Tower logger: * This plugin requires SimpleFeatures webGUI to operate Feb 15 14:34:39 Tower logger: * Copyright 2012, Bergware International & Andrew Hamer-Adams Feb 15 14:34:39 Tower logger: * Version: 1.0.5 Feb 15 14:34:39 Tower logger: ************************************************************* Feb 15 14:34:39 Tower logger: Feb 15 14:34:39 Tower logger: success Feb 15 14:34:39 Tower logger: plugin successfully installed The webserver php error log shows the following: /usr/bin/tail -n 1000 -f /var/log/lighttpd/php.errors.log [15-Feb-2013 13:35:33 UTC] PHP Notice: Undefined variable: string in /usr/local/emhttp/plugins/airvideo/airvideoctl.php on line 122 [15-Feb-2013 13:35:46 UTC] PHP Notice: Undefined variable: string in /usr/local/emhttp/plugins/mysql/mysqlctl.php on line 142 [15-Feb-2013 13:35:46 UTC] PHP Notice: Undefined variable: results in /usr/local/emhttp/plugins/mysql/mysqlctl.php on line 98
February 16, 201313 yr Ever since I installed SF 1.05 isee the following lines in the syslog: Feb 16 23:21:27 Tower1 emhttp: title not found (Other emhttp) What is the meaning of this? I also can just access my server by typing the ip-adress.
February 17, 201313 yr Ever since I installed SF 1.05 isee the following lines in the syslog: Feb 16 23:21:27 Tower1 emhttp: title not found (Other emhttp) What is the meaning of this? I also can just access my server by typing the ip-adress. It means you haven't upgraded to RC11! See this in the RC11 change notes: emhttp: fixed spurious "title not found" log entries
February 17, 201313 yr Author New version! See first post for details. Sorry for lack of updates, it has been busy here in Wellywood. That's not to say that Bonienl hasn't been pestering me to get updates out!!! He's really done a number on this new update. You'll love it.
February 17, 201313 yr Cant wait to try... Need to wait for my son to finish madagascar before I can reboot though :-)
February 17, 201313 yr Author Cant wait to try... Need to wait for my son to finish madagascar before I can reboot though :-) Never mind - I've just posted the changelog on the main post. That'll keep you busy
Archived
This topic is now archived and is closed to further replies.