ssjucrono Posted June 14, 2022 Share Posted June 14, 2022 Hello, I have been troubleshooting this issue for a few weeks. Unraid webui stops working after about 3 days uptime. This started about 2 weeks ago and reboot help the issues but again after 2-3 days webui becomes unresponsive. I thought first thought that /var/logs was becoming full but the webui was unresponsive prior to the logs becoming full. I have attached a few different logs prior to reboots. Let me know how else I can gather information raid-diagnostics-20220609-0954.zip raid-diagnostics-20220530-0910.zip raid-diagnostics-20220530-0905.zip raid-diagnostics-20220613-1913.zip raid-diagnostics-20220613-1909.zip Quote Link to comment
JorgeB Posted June 14, 2022 Share Posted June 14, 2022 Some strange errors that usually start with this: Jun 8 09:18:04 RAID emhttpd: error: publish, 256: Connection reset by peer (104): read Not sure what this is about but you could try booting the server in safe mode to see if it's plugin related. Quote Link to comment
ssjucrono Posted June 15, 2022 Author Share Posted June 15, 2022 after rebooting it worked for a 2 days then my docker containers stopped working. My VMs were still functioning okay. Very strange behavior. The only new plugin I installed recently is the file manager by dynamix. I just powered down the whole server to give it a rest as I was getting frustrated. If anyone has nay insight that would be greatly appreciated. Thank you Quote Link to comment
ssjucrono Posted June 19, 2022 Author Share Posted June 19, 2022 raid-diagnostics-20220619-1401.zip After rebooting about week ago I can no longer reach the webui. Log is not full. I gather diagnostics again here they are. Really looking for help here. I did not make any changes that I am aware of to the system and previously it would run for 5 months without issue. Thank you for you help Quote Link to comment
JorgeB Posted June 20, 2022 Share Posted June 20, 2022 Did you try On 6/14/2022 at 10:09 AM, JorgeB said: you could try booting the server in safe mode to see if it's plugin related. Quote Link to comment
ssjucrono Posted June 20, 2022 Author Share Posted June 20, 2022 ok I will try that. would safe mode tell me if it is a plugin issue? Or just waiting and seeing the uptime? Currently docker containers, VMs and Shares still work. It is just the webui not loading. Thank you again Quote Link to comment
ssjucrono Posted June 25, 2022 Author Share Posted June 25, 2022 Booted into safe mode and got this on the monitor. Just started the array will see what happens next Quote Link to comment
trurl Posted June 25, 2022 Share Posted June 25, 2022 According to those diagnostics sr0 is your flash drive, which was also connected as sdb Do you have a flash backup? Are you booting from USB2 port (recommended)? Quote Link to comment
Squid Posted June 25, 2022 Share Posted June 25, 2022 Definitely strange. Your BIOS thinks that your flash drive is also a CDROM drive, and reporting it as such. TBH, my first suggestion would be to restore the factory defaults in the BIOS. Quote Link to comment
JonathanM Posted June 26, 2022 Share Posted June 26, 2022 22 hours ago, Squid said: BIOS thinks that your flash drive is also a CDROM drive, Maybe this? https://en.wikipedia.org/wiki/U3_(software)#U3_platform Quote Link to comment
ssjucrono Posted June 26, 2022 Author Share Posted June 26, 2022 I was trying to use a different flash drive. But for some reason none of the ones I made using the creator have been bootable not sure why. And yeah it may be the u3 as it's a SanDisk. I will try reset my bios and using the same flash drive. Can I make a flash backup now of this USB? I'm currently in safe mode with GUI Thank you all for your time Quote Link to comment
trurl Posted June 26, 2022 Share Posted June 26, 2022 All you need is the config folder from flash to get your configuration back on a new install. Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 yes! and that's what I have tried but for some reason my server just says no bootable media. Like the flash drive didn't get made correctly with the unraid usb creator tool. I will try some different USB ports and see. Thank you! Quote Link to comment
trurl Posted June 27, 2022 Share Posted June 27, 2022 2 minutes ago, ssjucrono said: usb creator tool https://wiki.unraid.net/Articles/Getting_Started#Manual_Install_Method Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 yes, I have been using the creator tool and having the issue where it hangs on syncing files system. I found a thread on it but it wasn't helping. I will review the thread you posted trurl thank you Quote Link to comment
trurl Posted June 27, 2022 Share Posted June 27, 2022 21 minutes ago, ssjucrono said: yes, I have been using the creator tool The wiki link I gave was about NOT using the creator tool Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 duh, ok I see that now. Thank you Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 okay! that worked I switched USB drives and unraid is starting properly. However I am having issues starting my VM. even if I a remove the usb from the VM still will not start see log attached. now I will wait to see if I get longer than 4 days of uptime before the GUI stop working. Thank you again for all your help! This community is GREAT! Quote Link to comment
trurl Posted June 27, 2022 Share Posted June 27, 2022 1 minute ago, ssjucrono said: even if I a remove the usb from the VM What do you mean? Are you trying to passthru a USB controller? Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 I had a usb stick passed through to a VM. and it was working fine before I tried swapping USB boot devices. now I cannot start this VM if I untick the usb device: I also have machine check events attached my diagnostics Thank you again @trurl I do have nerdpack and mcelog installed raid-diagnostics-20220627-1022.zip Quote Link to comment
ssjucrono Posted June 27, 2022 Author Share Posted June 27, 2022 ok I edited the VM form and removed the USB lines from the file. and then re-added the USB and the VM Started up again. Quote Link to comment
ssjucrono Posted July 8, 2022 Author Share Posted July 8, 2022 So I was able to switch USB drives and I had decent uptime. Then my 48 core xeon server spiked to 100% on all cores randomly. I was bale to get a diagnostics off before I rebooted it : raid-diagnostics-20220706-1628.zip Now The webpage is not loading again. But all of my docker containers and VMs work fine and I can SSH. Here is a diagnostics now with the webui not loading: raid-diagnostics-20220708-0836.zip Thank you for all your help thus far it has been immensely helpful Quote Link to comment
JorgeB Posted July 8, 2022 Share Posted July 8, 2022 There's an OOM error, other than that it's clean, see if you can limit resources to docker/VMs. Quote Link to comment
ssjucrono Posted July 8, 2022 Author Share Posted July 8, 2022 Thank you JorgeB! What is an OOM error? I did just install a new docker "checkmk" so I rebooted and uninstalled it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.