aptalca Posted October 8, 2017 Author Share Posted October 8, 2017 1 hour ago, theboing said: Is there any chance to get a second instance running? Second instance of what? Quote Link to comment
SpaceInvaderOne Posted October 28, 2017 Share Posted October 28, 2017 Hi. I have made a video about setting up RDP calibre and cops here. Hope some people may find it useful Quote Link to comment
aptalca Posted October 29, 2017 Author Share Posted October 29, 2017 Excellent, thanks Quote Link to comment
pakiyabhai Posted November 4, 2017 Share Posted November 4, 2017 (edited) HI, Few noob questions. I'm using the RDP Calibre docker 1. Is the calibre in this container supposed to be self updating ? My Calibre docker is on 3.1.1 while update avaialbe in 3.11.1 , clicking on update does nothing 2. I understand the Edge variable has to be turned to 1, but whenever I do so , UI just won't launch , turning to back to 0 starts it Any ideas? Edited November 4, 2017 by pakiyabhai Clearing for which docker Quote Link to comment
aptalca Posted November 4, 2017 Author Share Posted November 4, 2017 9 minutes ago, pakiyabhai said: HI, Few noob questions 1. Is the calibre in this container supposed to be self updating ? My Calibre docker is on 3.1.1 while update avaialbe in 3.11.1 , clicking on update does nothing 2. I understand the Edge variable has to be turned to 1, but whenever I do so , UI just won't launch , turning to back to 0 starts it Any ideas? Set edge to 1, and watch the logs. Sometimes it takes a long time to download the updated calibre during which time there is no ui Quote Link to comment
pakiyabhai Posted November 4, 2017 Share Posted November 4, 2017 (edited) 2 hours ago, aptalca said: Set edge to 1, and watch the logs. Sometimes it takes a long time to download the updated calibre during which time there is no ui Thanks for the quick reply !! The logs show that Calibre is being downloaded but I"m not able to install it. It's a fresh install and nothing else is on the Unraid machine. Quote RDP Calibre.txt Edited November 4, 2017 by pakiyabhai Attached complete LOG Quote Link to comment
pakiyabhai Posted November 4, 2017 Share Posted November 4, 2017 HI, In addition to the above logs , I looked at the logs and found this when running with Edge=1 2017-11-05 02:06:27 URL:https://raw.githubusercontent.com/kovidgoyal/calibre/master/setup/linux-installer.py [27407/27407] -> "-" [1]Creating symlinks...Symlinking /opt/calibre/lrf2lrs to /usr/bin/lrf2lrsSymlinking /opt/calibre/fetch-ebook-metadata to /usr/bin/fetch-ebook-metadataSymlinking /opt/calibre/markdown-calibre to /usr/bin/markdown-calibreSymlinking /opt/calibre/ebook-edit to /usr/bin/ebook-editSymlinking /opt/calibre/lrfviewer to /usr/bin/lrfviewerSymlinking /opt/calibre/calibre-debug to /usr/bin/calibre-debugSymlinking /opt/calibre/web2disk to /usr/bin/web2diskSymlinking /opt/calibre/ebook-viewer to /usr/bin/ebook-viewerSymlinking /opt/calibre/calibre-customize to /usr/bin/calibre-customizeSymlinking /opt/calibre/ebook-polish to /usr/bin/ebook-polishSymlinking /opt/calibre/ebook-meta to /usr/bin/ebook-metaSymlinking /opt/calibre/calibre-server to /usr/bin/calibre-serverSymlinking /opt/calibre/calibre to /usr/bin/calibreSymlinking /opt/calibre/lrs2lrf to /usr/bin/lrs2lrfSymlinking /opt/calibre/calibredb to /usr/bin/calibredbSymlinking /opt/calibre/calibre-smtp to /usr/bin/calibre-smtpSymlinking /opt/calibre/ebook-convert to /usr/bin/ebook-convertSymlinking /opt/calibre/calibre-parallel to /usr/bin/calibre-parallelSymlinking /opt/calibre/ebook-device to /usr/bin/ebook-deviceSetting up command-line completion...Failed to find directory to install bash completions, using default.Installing bash completion to: /usr/share/bash-completion/completions/calibreSetting up desktop integration...____________________ WARNING ____________________Setting up desktop integration failed with error: Traceback (most recent call last):File "site-packages/calibre/linux.py", line 813, in setup_desktop_integrationFile "site-packages/calibre/linux.py", line 798, in install_iconsFile "site-packages/calibre/linux.py", line 792, in install_single_iconFile "subprocess.py", line 536, in check_callFile "subprocess.py", line 523, in callFile "subprocess.py", line 711, in __init__File "subprocess.py", line 1343, in _execute_childOSError: [Errno 2] No such file or directoryCreating un-installer: /usr/bin/calibre-uninstall Quote Link to comment
pakiyabhai Posted November 5, 2017 Share Posted November 5, 2017 Again complete noobie , Google showed that this error could be due to requriement of calibre for , glibc >= 2.13 and libstdc++ from gcc >= 4.7 https://www.mobileread.com/forums/showthread.php?t=244799 https://bugs.launchpad.net/calibre/+bug/1363731 Ofcourse I have no clues what it means and what to do . Quote Link to comment
aptalca Posted November 5, 2017 Author Share Posted November 5, 2017 (edited) I can confirm that the latest version of calibre doesn't work in this container. Since the baseimage it's using was coded by someone else, it may not be fixed. I'll look into it but no promises Edited November 5, 2017 by aptalca Quote Link to comment
pakiyabhai Posted November 5, 2017 Share Posted November 5, 2017 1 hour ago, aptalca said: I can confirm that the latest version of calibre doesn't work in this container. Since the baseimage it's using was coded by someone else, it may not be fixed. I'll look into it but no promises Thanks man , really appreciated . This really drove me nuts. Quote Link to comment
Squid Posted November 5, 2017 Share Posted November 5, 2017 11 hours ago, aptalca said: I can confirm that the latest version of calibre doesn't work in this container. Since the baseimage it's using was coded by someone else, it may not be fixed. I'll look into it but no promises Let me know. In the meantime, I'll throw a comment within CA to not use the Edge variable. Quote Link to comment
aptalca Posted November 6, 2017 Author Share Posted November 6, 2017 12 hours ago, Squid said: Let me know. In the meantime, I'll throw a comment within CA to not use the Edge variable. A comment would be great for now. Until I can figure out whether I can fix it or not. Thanks Quote Link to comment
clomads Posted November 6, 2017 Share Posted November 6, 2017 I'd like to second the request on updating the digiKam container to the latest version. Any luck with that? Quote Link to comment
aptalca Posted November 6, 2017 Author Share Posted November 6, 2017 4 hours ago, clomads said: I'd like to second the request on updating the digiKam container to the latest version. Any luck with that? I haven't had time to look into it yet Quote Link to comment
alturismo Posted November 6, 2017 Share Posted November 6, 2017 (edited) i tested the calibre rdp server and its working nice and easy. may i ask if its possible to also access it from externally through apache guacamole ? i use it to access jdown RDP, Windows RDP ... but on calibre RDP it just times out ... anything special todo ? for an tip thanks ahead solved, added 3389 container port so its all good. Edited November 6, 2017 by alturismo Quote Link to comment
pakiyabhai Posted November 16, 2017 Share Posted November 16, 2017 Just wanted to add that Calibre is now updating itself with latest version . However , with both the latest and the current docker version , auto importing of books happen only when the docker start (or is restarted) , it's not auto -adding the books from the directory as it should Quote Link to comment
ChapeL79 Posted November 20, 2017 Share Posted November 20, 2017 Hi, I've tried to find the answer here with no luck, is ha-bridge docker dead? All I get in logs is: Latest version on bwssystems github repo isInstalling version ''--2017-11-20 18:17:17-- https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jarResolving github.com (github.com)... 192.30.253.112, 192.30.253.113Connecting to github.com (github.com)|192.30.253.112|:443... connected.HTTP request sent, awaiting response... 404 Not FoundSetting correct permissions2017-11-20 18:17:17 ERROR 404: Not Found.Parameters used:Server IP : 192.168.0.66Server Port : 3080Starting Home Automation BridgeError: Unable to access jarfile ha-bridge-.jar I assume it's not pulling it correctly but I have very limited knowledge to whats going, any help would be much appreciated/ Thanks Quote Link to comment
aptalca Posted November 21, 2017 Author Share Posted November 21, 2017 11 hours ago, ChapeL79 said: Hi, I've tried to find the answer here with no luck, is ha-bridge docker dead? All I get in logs is: Latest version on bwssystems github repo isInstalling version ''--2017-11-20 18:17:17-- https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jarResolving github.com (github.com)... 192.30.253.112, 192.30.253.113Connecting to github.com (github.com)|192.30.253.112|:443... connected.HTTP request sent, awaiting response... 404 Not FoundSetting correct permissions2017-11-20 18:17:17 ERROR 404: Not Found.Parameters used:Server IP : 192.168.0.66Server Port : 3080Starting Home Automation BridgeError: Unable to access jarfile ha-bridge-.jar I assume it's not pulling it correctly but I have very limited knowledge to whats going, any help would be much appreciated/ Thanks Still working here. Looks like you had a connection issue to github and the container could not figure out the latest version correctly Quote Link to comment
ChapeL79 Posted November 21, 2017 Share Posted November 21, 2017 (edited) 10 hours ago, aptalca said: Still working here. Looks like you had a connection issue to github and the container could not figure out the latest version correctly Hmm, when I try to access https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jar from my phone or my computer i get Page not found. Github works just fine for me as I can access https://github.com/bwssytems/ha-bridge/releases/ . I can download https://github.com/bwssytems/ha-bridge/releases/download/v4.5.6/ha-bridge-4.5.6.jar. I can telnet into docker, is there any way I can download jar file and let docker to pick it up when I start it? Edited November 21, 2017 by ChapeL79 Works now!!!! Thanks. Quote Link to comment
aptalca Posted November 21, 2017 Author Share Posted November 21, 2017 (edited) 1 hour ago, ChapeL79 said: Hmm, when I try to access https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jar from my phone or my computer i get Page not found. Github works just fine for me as I can access https://github.com/bwssytems/ha-bridge/releases/ . I can download https://github.com/bwssytems/ha-bridge/releases/download/v4.5.6/ha-bridge-4.5.6.jar. I can telnet into docker, is there any way I can download jar file and let docker to pick it up when I start it? It first tries to get the latest release's version number, and then inserts it into the url to get the link https://github.com/bwssytems/ha-bridge/releases/download/v4.5.6/ha-bridge-4.5.6.jar but in your case the first part failed and it got blank, hence the wrong url: https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jar You can place the jar file into the config folder, and then set the environment variable -e VERSION="4.5.6" That way it will find it locally and will use it until your connection issue is resolved. EDIT: To see what issue it's having, can you exec into the container with "docker exec -it Home-Automation-Bridge bash" and then run the following? curl -sX GET https://api.github.com/repos/bwssytems/ha-bridge/releases/latest | grep 'tag_name' | cut -d\" -f4 It should give you "v4.5.6" Edited November 21, 2017 by aptalca 1 Quote Link to comment
ChapeL79 Posted November 24, 2017 Share Posted November 24, 2017 On 21/11/2017 at 5:27 PM, aptalca said: It first tries to get the latest release's version number, and then inserts it into the url to get the link https://github.com/bwssytems/ha-bridge/releases/download/v4.5.6/ha-bridge-4.5.6.jar but in your case the first part failed and it got blank, hence the wrong url: https://github.com/bwssytems/ha-bridge/releases/download/v/ha-bridge-.jar You can place the jar file into the config folder, and then set the environment variable -e VERSION="4.5.6" That way it will find it locally and will use it until your connection issue is resolved. EDIT: To see what issue it's having, can you exec into the container with "docker exec -it Home-Automation-Bridge bash" and then run the following? curl -sX GET https://api.github.com/repos/bwssytems/ha-bridge/releases/latest | grep 'tag_name' | cut -d\" -f4 It should give you "v4.5.6" It all works now, thank you for your help! Quote Link to comment
Bedey Posted December 15, 2017 Share Posted December 15, 2017 I used some time the jdownloader2 docker, but yesterday it stopped working. it gives me a black screen and the cursor, nothing else. Sorry for my english. Good evening. Quote Link to comment
aptalca Posted December 16, 2017 Author Share Posted December 16, 2017 13 hours ago, Bedey said: I used some time the jdownloader2 docker, but yesterday it stopped working. it gives me a black screen and the cursor, nothing else. Sorry for my english. Good evening. I just updated mine to the latest and restarted, it's working fine Quote Link to comment
Bedey Posted December 16, 2017 Share Posted December 16, 2017 updated to the last version and restarted, same thing... black screen Quote Link to comment
Bedey Posted December 16, 2017 Share Posted December 16, 2017 At the end i tried downloading the jdownloader2 by jlesage, it work fine , and i can copy and paste links, thanks for you help and have a good day Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.