s.Oliver Posted March 4, 2019 Share Posted March 4, 2019 (edited) 6 minutes ago, saarg said: There is nothing I can do about libredrive. It's the makemkv author that needs to enable the features. i know, just wanted to give my experiences back – so it may be of some help to others who are reading here. usually (within other rdp sessions i use) there's always a username/password combination as credentials used. thx. for looking it up. Edited March 4, 2019 by s.Oliver Quote Link to comment
po0kiez Posted October 11, 2019 Share Posted October 11, 2019 (edited) is there a way to update the software? my current version is 1.14.3. It prompts for an update for 1.14.5. Sorry I feel very new to all of this the docker applications list does not show any update option, even when i force it to update Edited October 11, 2019 by po0kiez adding information Quote Link to comment
saarg Posted October 11, 2019 Author Share Posted October 11, 2019 10 hours ago, po0kiez said: is there a way to update the software? my current version is 1.14.3. It prompts for an update for 1.14.5. Sorry I feel very new to all of this the docker applications list does not show any update option, even when i force it to update I haven't used makemkv in a while, so didn't notice there was a new version out. I'll trigger a new build. Should be available in a couple of hours. 1 1 Quote Link to comment
po0kiez Posted October 12, 2019 Share Posted October 12, 2019 Thank you for the response. I appreciate you saarg. You do us a great service Quote Link to comment
landS Posted October 12, 2019 Share Posted October 12, 2019 Thanks saarg! The other makemkv does not allow me to consistently pass through the ODD. This RDP one, however, works great. Quote Link to comment
sosdk Posted December 28, 2019 Share Posted December 28, 2019 Hi I think there's a new version out again Quote Link to comment
saarg Posted December 28, 2019 Author Share Posted December 28, 2019 1 hour ago, sosdk said: Hi I think there's a new version out again I triggered a build, so it should be ready in a couple of hours. Quote Link to comment
sosdk Posted December 29, 2019 Share Posted December 29, 2019 22 hours ago, saarg said: I triggered a build, so it should be ready in a couple of hours. Just tested and it's working Quote Link to comment
landS Posted December 30, 2019 Share Posted December 30, 2019 Thank you greatly saarg Quote Link to comment
jdubbs23 Posted March 30, 2020 Share Posted March 30, 2020 I just did the latest update that showed today, and now when I try to go to the WebUI it shows the xrdp session but when I select OK I just get a blank screen. How can I diagnose this? Quote Link to comment
saarg Posted March 30, 2020 Author Share Posted March 30, 2020 (edited) 6 hours ago, jdubbs23 said: I just did the latest update that showed today, and now when I try to go to the WebUI it shows the xrdp session but when I select OK I just get a blank screen. How can I diagnose this? I found the issue. There was some changes in the dependencies so makemkv didn't install correctly. Hopefully the new build will work. Edited March 30, 2020 by saarg Quote Link to comment
CIvisMiles Posted March 30, 2020 Share Posted March 30, 2020 (edited) 9 hours ago, jdubbs23 said: I just did the latest update that showed today, and now when I try to go to the WebUI it shows the xrdp session but when I select OK I just get a blank screen. How can I diagnose this? Same here 3 hours ago, saarg said: Tried cleaning the browser cache? Post the container log. Cleared Cache. Tried Chrome and Firefox with the same results. log txt file is attached log.txt Edited March 31, 2020 by CIvisMiles fixed a word Quote Link to comment
saarg Posted March 30, 2020 Author Share Posted March 30, 2020 1 minute ago, CIvisMiles said: Same here Cleared Cache. Tried Chrome and Firefox with the same results. Cache txt file is attached log.txt 26.47 kB · 0 downloads Read my post again 😉 Quote Link to comment
jdubbs23 Posted March 31, 2020 Share Posted March 31, 2020 17 hours ago, saarg said: I found the issue. There was some changes in the dependencies so makemkv didn't install correctly. Hopefully the new build will work. Is there an update to the docker? Unraid isn't showing anything. Quote Link to comment
saarg Posted March 31, 2020 Author Share Posted March 31, 2020 8 minutes ago, jdubbs23 said: Is there an update to the docker? Unraid isn't showing anything. Build failed, so no update yet. Quote Link to comment
jdubbs23 Posted April 1, 2020 Share Posted April 1, 2020 Just saw an update was available. After applying though still get the black screen. Quote Link to comment
saarg Posted April 1, 2020 Author Share Posted April 1, 2020 7 hours ago, jdubbs23 said: Just saw an update was available. After applying though still get the black screen. I gave up and reverted to 1.14.7 due to dependencie issue with 1.15.0. The base ubuntu version is too old to have the needed libstdc++6 version. Not sure if I'm going to update this anymore. Might move it over to the new linuxserver gui base. Quote Link to comment
jdubbs23 Posted April 1, 2020 Share Posted April 1, 2020 5 hours ago, saarg said: I gave up and reverted to 1.14.7 due to dependencie issue with 1.15.0. The base ubuntu version is too old to have the needed libstdc++6 version. Not sure if I'm going to update this anymore. Might move it over to the new linuxserver gui base. Thanks for the update and the work you do for this container. Maybe I'm doing something wrong on my end because still not getting it to work. Is there something I could check to see? Do you mean you might not update the MakeMKV container or the base ubuntu distribution you have for running MakeMKV? Quote Link to comment
jspeed Posted April 1, 2020 Share Posted April 1, 2020 How do I go about reverting to the old version? Quote Link to comment
saarg Posted April 1, 2020 Author Share Posted April 1, 2020 2 hours ago, jdubbs23 said: Thanks for the update and the work you do for this container. Maybe I'm doing something wrong on my end because still not getting it to work. Is there something I could check to see? Do you mean you might not update the MakeMKV container or the base ubuntu distribution you have for running MakeMKV? Turns out the 1.14.7 source is removed and when a new build on docker hub is built, it overwrites the previous. So it's a point of no return. I'm not going to update this container as I didn't make the base container for it, so can't update ubuntu to a newer version. So the best option is to install either binhex's version or jlesage's. Quote Link to comment
saarg Posted April 1, 2020 Author Share Posted April 1, 2020 34 minutes ago, jspeed said: How do I go about reverting to the old version? You can't I'm afraid. Look at my post above for info. Quote Link to comment
sjlbautista Posted April 1, 2020 Share Posted April 1, 2020 3 minutes ago, saarg said: Turns out the 1.14.7 source is removed and when a new build on docker hub is built, it overwrites the previous. So it's a point of no return. I'm not going to update this container as I didn't make the base container for it, so can't update ubuntu to a newer version. So the best option is to install either binhex's version or jlesage's. Sorry to hear that. This was a great container, and I used it to rip my entire collection. Thanks for all of the work that you've done on this. Quote Link to comment
Squid Posted April 1, 2020 Share Posted April 1, 2020 7 minutes ago, saarg said: You can't I'm afraid. Look at my post above for info. TLDR: I'm removing it from CA? Quote Link to comment
saarg Posted April 1, 2020 Author Share Posted April 1, 2020 26 minutes ago, Squid said: TLDR: I'm removing it from CA? Yeah, thanks. If I make a new, it will be under the lsio umbrella. Quote Link to comment
jspeed Posted April 1, 2020 Share Posted April 1, 2020 Thanks, and Thanks for the work you did on this one. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.