HarryRosen Posted August 20, 2011 Share Posted August 20, 2011 So I don't need the -e anymore, I will take that out boot/cache_dirs -d 9 -m 3 -M 5 -p 200 -i "TV\ Shows" -i "Movies" -i "Music" -i "Public" -i "Complete" -w I needed to have the TV Shows like TV\ Shows becasue it said it doesn't exist so with the -d 9 options the following dirs will be cached too say TV Shows\Showname\Seasons 01\ so if i click on season 01 to show the contents the drives should still not spin up am I understanding this correctly? Quote Link to comment
prostuff1 Posted August 20, 2011 Share Posted August 20, 2011 So I don't need the -e anymore, I will take that out boot/cache_dirs -d 9 -m 3 -M 5 -p 200 -i "TV\ Shows" -i "Movies" -i "Music" -i "Public" -i "Complete" -w I needed to have the TV Shows like TV\ Shows becasue it said it doesn't exist so with the -d 9 options the following dirs will be cached too say TV Shows\Showname\Seasons 01\ so if i click on season 01 to show the contents the drives should still not spin up am I understanding this correctly? It will attempt to cache them, there is NO guarantee. If on your computer it has to generate a thumbnail, preview, etc then the disk will spin up, and there is nothing that can really be done about that. Quote Link to comment
heffneil Posted August 23, 2011 Share Posted August 23, 2011 How can I figure out if this is working for me? I don't believe it is when I tried to connect from my laptop it took a long time to load up and when I dug in a little bit the drive spun up... Any help would be much appreciated. Thanks, Neil Quote Link to comment
Joe L. Posted August 24, 2011 Author Share Posted August 24, 2011 How can I figure out if this is working for me? I don't believe it is when I tried to connect from my laptop it took a long time to load up and when I dug in a little bit the drive spun up... Any help would be much appreciated. Thanks, Neil run it in the foreground so you ran watch it as it runs. Invoke with -F -v Options Quote Link to comment
heffneil Posted August 24, 2011 Share Posted August 24, 2011 Thanks. This is what I see now: Executing find /mnt/disk1/Movies -noleaf Executing find /mnt/disk2/Movies -noleaf Executing find /mnt/disk3/Movies -noleaf Executing find /mnt/disk4/Movies -noleaf Executing find /mnt/disk5/Movies -noleaf Executing find /mnt/disk6/Movies -noleaf Executing find /mnt/disk7/Movies -noleaf Executing find /mnt/cache/Movies -noleaf Executed find in 0.073426 seconds, weighted avg=0.073422 seconds, now sleeping 3 seconds Is that normal and a good sign? Thanks, Neil Quote Link to comment
Joe L. Posted August 24, 2011 Author Share Posted August 24, 2011 .07 seconds indicates all is in ram or you have very fast disks. Cache_dirs will not help if your laptop is a accessing files.to create thumbnails, or store attributes. It does not cache file contents, just directory entries. The whole idea is the directory entries will not be displaced from the cache in the next three seconds until the next scan. Quote Link to comment
heffneil Posted August 24, 2011 Share Posted August 24, 2011 When I run it the first time I Get the .7 seconds. cache_dirs -F -v -w -B -i "Movies" "Recordings" Executing find /mnt/disk1/Movies -noleaf Executing find /mnt/disk2/Movies -noleaf Executing find /mnt/disk3/Movies -noleaf Executing find /mnt/disk4/Movies -noleaf Executing find /mnt/disk5/Movies -noleaf Executing find /mnt/disk6/Movies -noleaf Executing find /mnt/disk7/Movies -noleaf Executing find /mnt/cache/Movies -noleaf Executed find in 0.073367 seconds, weighted avg=0.073367 seconds, now sleeping 5 seconds I have green drives (i.e. Not fast drives0 and they are all spun down so I think something is wrong here? Thanks, Neil Quote Link to comment
prostuff1 Posted August 24, 2011 Share Posted August 24, 2011 When I run it the first time I Get the .7 seconds. cache_dirs -F -v -w -B -i "Movies" "Recordings" Executing find /mnt/disk1/Movies -noleaf Executing find /mnt/disk2/Movies -noleaf Executing find /mnt/disk3/Movies -noleaf Executing find /mnt/disk4/Movies -noleaf Executing find /mnt/disk5/Movies -noleaf Executing find /mnt/disk6/Movies -noleaf Executing find /mnt/disk7/Movies -noleaf Executing find /mnt/cache/Movies -noleaf Executed find in 0.073367 seconds, weighted avg=0.073367 seconds, now sleeping 5 seconds I have green drives (i.e. Not fast drives0 and they are all spun down so I think something is wrong here? Thanks, Neil No, it seems to be running just fine. Quote Link to comment
Joe L. Posted August 24, 2011 Author Share Posted August 24, 2011 Does not matter,green or not, if the find completes without spinning up the disks then all the directory blocks are in the buffer cache. Cache_dirs is doing its job. Quote Link to comment
T800 Posted September 1, 2011 Share Posted September 1, 2011 I've got 16TB in my unRAID server using a AMD 140 Sempron and 1GB of RAM. It only holds Movies (about 2000 at present). Will cache_dirs work after installation without adjusting any settings? Can my RAM/CPU handle it? Thanks Quote Link to comment
Joe L. Posted September 1, 2011 Author Share Posted September 1, 2011 I've got 16TB in my unRAID server using a AMD 140 Sempron and 1GB of RAM. It only holds Movies (about 2000 at present). Will cache_dirs work after installation without adjusting any settings? Can my RAM/CPU handle it? Thanks You will tell us. Run in the foreground to see what it does. I have have that RAM and it works fine for me. Are you running an 8086 or greater? Then it is enough. Quote Link to comment
T800 Posted September 1, 2011 Share Posted September 1, 2011 I've got 16TB in my unRAID server using a AMD 140 Sempron and 1GB of RAM. It only holds Movies (about 2000 at present). Will cache_dirs work after installation without adjusting any settings? Can my RAM/CPU handle it? Thanks You will tell us. Run in the foreground to see what it does. I have have that RAM and it works fine for me. Are you running an 8086 or greater? Then it is enough. So if I run it and it can't cope it won't crash? I've no idea if it is 8086, it's this one: http://www.pcworld.co.uk/gbuk/amd-sempron-140-processor-04820926-pdt.html Quote Link to comment
Chris Pollard Posted September 1, 2011 Share Posted September 1, 2011 I have 2000 movies and 6000 TV Episodes on my system and cache_dirs constantly spins up drives with the default settings. 6gb of RAM. Quote Link to comment
igboo Posted September 6, 2011 Share Posted September 6, 2011 I can't seem to get cache_dirs to load from my go script when unraid is started and I can't figure out why. The start command is added to my go script right between the start of the emhttp start and the start up of unmenu. I can see these two start up in the syslog, but no sign of cache_dirs until I start it manually. What could I be missing? This is normally not a problem. The server doesn't get stopped very often. But now that Irene has blown through and the local electric utility seems to go offline with a stiff breeze, the server has been going up and down quite a bit and it's starting to become a pain. Thanks, Fred Quote Link to comment
Johnm Posted September 6, 2011 Share Posted September 6, 2011 remember that the command and path is all case sensitive and make sure you don't have a windows carriage return after the command Try copying the line from the go script and pasting it into putty and make sure it works. Quote Link to comment
Eisi2005 Posted September 21, 2011 Share Posted September 21, 2011 @Joe L. how could i excluded the following dirs. My structure is the following first dir is server and there ar the dirs called Filme, Mp3, ... i want to exclude Mp3 cache_dirs -w -B -e "\server\Bilder" -e "server\Mp3" bring an error ERROR: excluded directory "server\MP3" does not exist. Is there any chance ? Greets Eisi Quote Link to comment
jimwhite Posted September 21, 2011 Share Posted September 21, 2011 you forgot the "/" before "server/mp3" Quote Link to comment
Joe L. Posted September 21, 2011 Author Share Posted September 21, 2011 remember that the command and path is all case sensitive and make sure you don't have a windows carriage return after the command Try copying the line from the go script and pasting it into putty and make sure it works. make sure you give the full path to the command. If you're not sure, zip your go file and attach it, otherwise all we can say is it works for us. If you invoke it immediately after emhttp the array will not yet be online, so it should queue itself to be re-invoked.... (it you gave it the -w option when invoking it) Quote Link to comment
Joe L. Posted September 21, 2011 Author Share Posted September 21, 2011 @Joe L. how could i excluded the following dirs. My structure is the following first dir is server and there ar the dirs called Filme, Mp3, ... i want to exclude Mp3 cache_dirs -w -B -e "\server\Bilder" -e "server\Mp3" bring an error ERROR: excluded directory "server\MP3" does not exist. Is there any chance ? Greets Eisi Linux uses slashes, dos uses back-slashes. If "server" is indeed a folder on your user shares (you have a user-share named "server") then the path is /server/MP3 not \server\MP3 Quote Link to comment
Eisi2005 Posted September 21, 2011 Share Posted September 21, 2011 @Joe L. Thx for the fast answer. I hope you could say me the right syntax. i have a share called server. If i mount the share i see the folders called: Filme MP3 Bilder if i look per putty on the unraid server i have this structure cd mnt in mnt is disk1 disk2 disk3 disk 4 disk 5 disk 6 and user under every disk i have a dir called server and in this dir are the folders Filme, MP3, Bilder in the user folder i have a dir called server and in this dir are the other dirs Filme. MP3, Bilder when i now included "server" and will excluded /server/MP3 will this work ? or will the -i "server" overwrite the exclusion from -e "/server/mp3/" ? Greets Eisi Quote Link to comment
Joe L. Posted September 21, 2011 Author Share Posted September 21, 2011 @Joe L. Thx for the fast answer. I hope you could say me the right syntax. i have a share called server. If i mount the share i see the folders called: Filme MP3 Bilder if i look per putty on the unraid server i have this structure cd mnt in mnt is disk1 disk2 disk3 disk 4 disk 5 disk 6 and user under every disk i have a dir called server and in this dir are the folders Filme, MP3, Bilder in the user folder i have a dir called server and in this dir are the other dirs Filme. MP3, Bilder when i now included "server" and will excluded /server/MP3 will this work ? or will the -i "server" overwrite the exclusion from -e "/server/mp3/" ? Greets Eisi the includes and excludes cannot be used on sub-directories under a share as the code is written. You can exclude, or include "server" You can, of course modify the script to do as you desire, but that is not how I originally wrote it. I think you'll find a solution in this thread, since I remember a while ago someone asking a similar question. For the most part, unless you have a HUGE set of files (100000 or more) in a directory there is no need to use anything to include or exclude. Quote Link to comment
p1lot Posted September 21, 2011 Share Posted September 21, 2011 I'm about to try cache_dirs for the first time, but have a preclear process running. Running both at the same time isn't a problem is it? Quote Link to comment
Joe L. Posted September 21, 2011 Author Share Posted September 21, 2011 I'm about to try cache_dirs for the first time, but have a preclear process running. Running both at the same time isn't a problem is it? It would depend on how much memory you have. If you have less than 500 Meg, it might be. Joe L. Quote Link to comment
p1lot Posted September 21, 2011 Share Posted September 21, 2011 4 gigs here, already started cache_dirs and it's working great. thank you for another great unraid-extension joe! Quote Link to comment
dlandon Posted September 22, 2011 Share Posted September 22, 2011 I am getting the "duplicate objects" log entries whenever mover is running. As a test I stopped cache_dirs and ran the mover manually and did not get the "duplicate object" log entries. I can't say for sure that cache_dirs is causing these entries, but it looks to be the cuplrit. Is there a way to confirm this? If so, then what steps can I take to stop the log entries? I have checked and I am running the latest version of cache_dirs. There are a lot of these log entries at night when the mover is running. Seems like a lot of needless entries in the log. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.