1 hour ago, strike said:

You should change your PIA password asap, as you forgot to remove it from the docker run command. If you change your network to bridge instead of docknet, can you access the webui then?

No, it makes no difference if I use bridge or custom network I still can't access it.

3 minutes ago, Johnnycat15 said:

No, it makes no difference if I use bridge or custom network I still can't access it.

Ok, You mentioned that you're accessing this from a remote computer. What is the local IP of that computer?

5 minutes ago, strike said:

Ok, You mentioned that you're accessing this from a remote computer. What is the local IP of that computer?

I'm accessing it through tailscale I added the tailscail network Ip into the container. the local Ip of the PC I'm using to access my tailscali is 192.168.68.59

1 minute ago, Johnnycat15 said:

I'm accessing it through tailscale I added the tailscail network Ip into the container. the local Ip of the PC I'm using to access my tailscali is 192.168.68.59

Is tailscale installed in the container or are you accessing it through tailscale subnet router? Can you add 192.168.68.0/24 to the LAN_NETWORK variable in the template as well and try again.

9 minutes ago, strike said:

Is tailscale installed in the container or are you accessing it through tailscale subnet router? Can you add 192.168.68.0/24 to the LAN_NETWORK variable in the template as well and try again.

I am accessing through the subnet router. I do not have tailscale in the container turned on. I have tried it that way but still didn't work. I have added the 192.168.68.0/24 still not accessible. It was working for about 3 weeks then just stopped being able to access the web Ui. I tried all the previous suggestions I could find. I uninstalled it and binhex-sabnzbvpn because i was having the same issue. used appdata cleanup plus to remove old data and start fresh. I have not reinstalled sabnzb yet.

Ok, also add this to the LAN_NETWORK 100.64.0.0/10
Which IP are you trying to access the web UI on? Try accessing it with the servers tailscale ip:port. http://100.x.x.x:8112 Leaving the network as bridge, at least until you can access the webui.

Do you have accept routes or accept dns enabled in your server's Tailscale settings?

15 minutes ago, strike said:

Ok, also add this to the LAN_NETWORK 100.64.0.0/10
Which IP are you trying to access the web UI on? Try accessing it with the servers tailscale ip:port. http://100.x.x.x:8112 Leaving the network as bridge, at least until you can access the webui.

Do you have accept routes or accept dns enabled in your server's Tailscale settings?

Adding 100.64.0.0/10 Ip got me into the web ui. I could have sworn the accept routes and accept dns enabled was on but it is currently off on both. Can you please explain why adding 100.64.0.0/10 got it to work? Currently the routs and dns in tailscale are off.

1 minute ago, Johnnycat15 said:

Adding 100.64.0.0/10 Ip got me into the web ui. I could have sworn the accept routes and accept dns enabled was on but it is currently off on both. Can you please explain why adding 100.64.0.0/10 got it to work? Currently the routs and dns in tailscale are off.

Nice!

2 minutes ago, Johnnycat15 said:

I could have sworn the accept routes and accept dns enabled was on but it is currently off on both.

It should be off.

2 minutes ago, Johnnycat15 said:

Can you please explain why adding 100.64.0.0/10 got it to work?

This is the subnet for the tailscale network, which is essentially the same as adding your local subnet 10.10.0.0/24 or 192.168.68.0/24, but for tailscale. I don't know what Tailscale IP you added before, but that looks like it's only for one IP, and not the entire subnet as it should be.

1 minute ago, strike said:

This is the subnet for the tailscale network, which is essentially the same as adding your local subnet 10.10.0.0/24 or 192.168.68.0/24, but for tailscale. I don't know what Tailscale IP you added before, but that looks like it's only for one IP, and not the entire subnet as it should be.

OK, I put the ip for the unraid server on the tail net in. Thank you so much for your help with this.

1 minute ago, Johnnycat15 said:

Thank you so much for your help with this.

NP, Glad we could get it working :)