2 hours ago, byographic said:

Hi, I've a question regarding the set up of the application, basically when I put the address in the IP/host section i always get an error "please enter a valid ip address/hostname".

I use a dynamic dns so it's a third level domain

thank you

 

Hi @byographic,

Since you mention dynamic dns, it seems you're trying to connect remotely.

The app can connect remotely only if you have OpenVPN (or similar) set up in your router/firewall or unraid server.

As mentioned a couple of posts above, if you want to install OpenVPN on unraid, you can check this video

Let me know if you're referring to a different scenario.

9 hours ago, byographic said:

Hi, I've a question regarding the set up of the application, basically when I put the address in the IP/host section i always get an error "please enter a valid ip address/hostname".

I use a dynamic dns so it's a third level domain

thank you

 

 

Pretty sure it is asking for your server's NAT IP on your local wi-fi network.

16 hours ago, jbrodriguez said:

Hi @byographic,

Since you mention dynamic dns, it seems you're trying to connect remotely.

The app can connect remotely only if you have OpenVPN (or similar) set up in your router/firewall or unraid server.

As mentioned a couple of posts above, if you want to install OpenVPN on unraid, you can check this video

Let me know if you're referring to a different scenario.

yes i was trying to connect remotely. i will set up OpenVPN it was already in my plans but i didn't had the chance yet

 

thank you

v2.4.1 is now available on Play Store and App Store !

 

This release fixes the app name in iOS devices.

 

Also in this release:
- Replace swipe component
- Replace button component
- General improvements and bug fixes
 

On 10/02/2017 at 7:18 PM, jbrodriguez said:

@johnnie.black, would you let me know if the visual issue persists ?

 

v2.4.1 fixed my display issue.

I notice that the new version has much more empty space between display selections (Disks, Ops, etc).

 

Was this necessary to fix some issue or could it be reverted back to the previous view? Was nice not to have to do a bunch of swiping.

After checking the "Yes I want to do this" I can't seem to stop the array on 2.4.1 IOS

11 hours ago, johnnie.black said:

 

v2.4.1 fixed my display issue.

 

Awesome ! I was hoping that would be the case !

8 hours ago, wgstarks said:

 

I notice that the new version has much more empty space between display selections (Disks, Ops, etc).

 

Mmm, there's a lot more space.

I'll look into it.

3 hours ago, remati said:

After checking the "Yes I want to do this" I can't seem to stop the array on 2.4.1 IOS

What unRAID version are you running ?

I tried on a 6.3.0 and it's working fine.

When having more than one server in the app, and one is offline, the app will try refreshing that offline one constantly. Can you make a timeout, if the app havent reached the server within a periode og time, maybe 5sec and mark that server as offline?

 

Running iOS, 6.3.2 and 2.4.1

 

Sent from my iPhone using Tapatalk

 

v2.4.2 is available as an over-the-air release (won't appear in the App Store nor Play store)

 

Changes:

 

On 6.3.x servers, the app will now inkove power down on the server without
stopping the array first. This is because the power down procedure in that
version, tries to stop the array first.

 

Additionally, when refreshing servers, the app checks if a server is down
first, to avoid unnecessary waits.

 

Also in this release:
- General improvements and bug fixes

 

I'm still looking into the white spaces reported by wgstarks.

 

@perhansen, this should fix the issue you mentioned.

 

Note: with over-the-air releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app)

v2.4.2 is available as an over-the-air release (won't appear in the App Store nor Play store)
 
Changes:
 
On 6.3.x servers, the app will now inkove power down on the server without
stopping the array first. This is because the power down procedure in that
version, tries to stop the array first.
 
Additionally, when refreshing servers, the app checks if a server is down
first, to avoid unnecessary waits.
 
Also in this release:
- General improvements and bug fixes
 
I'm still looking into the white spaces reported by wgstarks.
 
@perhansen, this should fix the issue you mentioned.
 
Note: with over-the-air releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app)

Perfect. Thanks for the update.

What do you mean, when you say that the app will now invoke powerdown on the server without stopping the array first?
Will the power down then stop the array and do a clean shutdown?
I


Sent from my iPhone using Tapatalk

 

4 minutes ago, perhansen said:

What do you mean, when you say that the app will now invoke powerdown on the server without stopping the array first?
Will the power down then stop the array and do a clean shutdown?

 

Yes, as per this comment 

 

For 6.3.x, the app is basically calling /sbin/poweroff (as if you were invoking it from a terminal)

 

 
 
Yes, as per this comment 
 
For 6.3.x, the app is basically calling /sbin/poweroff (as if you were invoking it from a terminal)
 

Thanks for the info.


Sent from my iPhone using Tapatalk

8 hours ago, jbrodriguez said:

What unRAID version are you running ?

I tried on a 6.3.0 and it's working fine.

 

Hey jbrodriguez, I'm on unraid version is 6.3.2

 

Just checked it again today to make sure and it still has the problem. After enabling the slider "Yes I want to do this" then array stop button is still disabled.

 

 

 

5 minutes ago, remati said:

Just checked it again today to make sure and it still has the problem. After enabling the slider "Yes I want to do this" then array stop button is still disabled.

 

Oh ok ! I thought you meant that the array wasn't actually stopping.

Sure, let me check what could be the issue there.

v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store)

 

This release provides the following fixes
- Stop operation not being enabled
- Tabs with too much white space

 

@remati this should fix your issue

@wgstarks this should fix your issue

v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store)
 
This release provides the following fixes
- Stop operation not being enabled
- Tabs with too much white space
 
[mention=69170]remati[/mention] this should fix your issue
[mention=62472]wgstarks[/mention] this should fix your issue

Yes sir, fixed my issue. Great work!


Sent from my iPad using Tapatalk

22 hours ago, jbrodriguez said:

v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store)

 

This release provides the following fixes
- Stop operation not being enabled
- Tabs with too much white space

 

@remati this should fix your issue

@wgstarks this should fix your issue

Not sure it made much difference.

 

My ControlR v2.4.0 doesnt find my servers any more. I'm running it on my mobile. How does OTA uodate work so i can upgrade the app itself?

Sent from my LG-D855 using Tapatalk

On 3/4/2017 at 2:24 AM, remati said:

Yes sir, fixed my issue. Great work!

Good to know, thanks !

20 hours ago, wgstarks said:

Not sure it made much difference.

Doesn't look good. Let me give it some more thought.

13 minutes ago, skylark said:

My ControlR v2.4.0 doesnt find my servers any more. I'm running it on my mobile. How does OTA uodate work so i can upgrade the app itself?

Hi skylark, you should upgrade first to v2.4.1 which was a regular release (on the App/Play store).

In any case, for ota releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app)

1 hour ago, jbrodriguez said:

Doesn't look good. Let me give it some more thought.

Thanks. This is purely a cosmetic issue, so if it doesn't get resolved it's really no big deal. If the blank spaces hadn't been smaller before I probably wouldn't have reported it at all.